View 194018-1_6711577.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

135 catalog 82181 dimensions are in inches and dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 4-08 millimeters unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 5.0 mm power key connectors (5.0 pkc) (wire-to-board) amp soft shell pin and socket connectors 5.0 mm power key connectors .197 [5.00] centerline standard density product facts compact design with 19.4 mm mated height power circuit connector with 5.0 mm contact centerline wire-to-board connectors consisting of plug housings for wires and pcb header assemblies with a clear clicking sound, contact insertions can be made easier. the double lock plate provides for complete loading of contacts locking levers are surrounded by walls, which protect levers and prevent tangling with wires connector is designed to release bubbles created by the process of potting (pc board coating) housing lances also help prevent tangling of wired contacts recognized under the component program of underwriters laboratories inc., file no. e28476 certified by canadian standards association, file no. lr7189 5.0 mm power key connectors are for power circuits of home appliances, especially targeting gas appliances. the connector features four kinds of keying per housing. only color-coding of hous- ings limited the efficiency of blind mating where you could not see connectors. however, the new keying mechanism not only improves assembly efficiency but also helps prevent mismating. part numbers involved can be reduced so that purchasing and stock level control can be made simpler. performance characteristics voltage rating 300 vac 1 current rating 10a max. 2 operating temperature -30c ~ +105?c applicable wire 24-16 awg applicable pc board thickness 1.6 mm 1 excludes header tyne round space. usable for 150 vac applications when the round dimensions are 3 mm or less. 2 specified values vary according to the number of contacts and the wire used. the 10 a maximum value applies to 16 awg wire used with 2 contacts. technical documents product specification 108-5699 application specification 114-5292 r r
136 catalog 82181 dimensions are in inches and dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 4-08 millimeters unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 5.0 mm power key connectors (5.0 pkc) (wire-to-board) (continued) amp soft shell pin and socket connectors 5.0 mm power key connectors .197 [5.00] centerline standard density quick reference chart for mating part numbers applicable no. of pos. double lock plate mating header assy. type of keying/color part number part number part number type a/natural 1376388-1 1376394-1 1376382-1 2 type b/red 1-1376388-2 1376394-1 1-1376382-2 type c/blue 2-1376388-3 1376294-1 2-1376382-3 type d/yellow 3-1376388-4 1376394-1 3-1376382-4 type a/natural 1376389-1 1376395-1 1376383-1 1376421-1 3 type b/red 1-1376389-2 1376395-1 1-1376383-2 1-1376421-2 type c/blue 2-1376389-3 1376395-1 2-1376383-3 2-1376421-3 type d/yellow 3-1376389-4 1376395-1 3-1376383-4 3-1376421-4 type a/natural 1376390-1 1376396-1 1376384-1 4 type b/red 1-1376390-2 1376396-1 1-1376384-2 type c/blue 2-1376390-3 1376396-1 2-1376384-3 type d/yellow 3-1376390-4 1376396-1 3-1376384-4 type a/natural 1376391-1 1376397-1 1376385-1 6 type b/red 1-1376391-2 1376397-1 1-1376385-2 type c/blue 2-1376391-3 1376397-1 2-1376385-3 type d/yellow 3-1376391-4 1376397-1 3-1376385-4 2 row type a/natural 1376392-1 1376394-1 1376386-1 4 type b/red 1-1376392-2 1376394-1 1-1376386-2 type c/blue 2-1376392-3 1376394-1 2-1376386-3 type d/yellow 3-1376392-4 1376394-1 3-1376386-4 type a/natural 1376393-1 1376395-1 1376387-1 6 type b/red 1-1376393-2 1376395-1 1-1376387-2 type c/blue 2-1376393-3 1376395-1 2-1376387-3 type d/yellow 3-1376393-4 1376395-1 3-1376387-4 *included in header assy. line are tube stick version. refer to the appropriate description in the catalog. note: all part numbers are rohs compliant. plug housing note: dimensions shown are metric.
137 catalog 82181 dimensions are in inches and dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 4-08 millimeters unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 5.0 mm power key connectors (5.0 pkc) (wire-to-board) (continued) amp soft shell pin and socket connectors 5.0 mm power key connectors .197 [5.00] centerline standard density material and finish pre-tinned copper alloy receptacle contacts material and finish ul94v-0, 6/6 nylon, glass filled, black double lock plates section x-x receptacle contact applicator awg mm 2 wire ins. dia. part no. part no. 24~20 0.22~0.53 1.89~2.7 1376348-1 (strip form) * 20~16 0.5~1.25 2.0~3.1 1376347-1 (strip form) * * contact the tooling assistance center (tac) at 1-800-722-1111 for applicator part number. note: dimensions shown are metric. note: all part numbers are rohs compliant. wire range double lock plate applicable no. of pos. ab part no. plug part no. 2 13.5 5 1376394-1 -1376388- -1376392- 3 18.5 10 1376395-1 -1376389- -1376393- 4 23.5 15 1376396-1 -1376390- 6 33.5 25 1376397-1 -1376391- * contact the tooling assistance center (tac) for applicator part number. note: dimensions shown are metric. note: all part numbers are rohs compliant. dimensions (double lock plate)
138 catalog 82181 dimensions are in inches and dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 4-08 millimeters unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 5.0 mm power key connectors (5.0 pkc) (wire-to-board) (continued) amp soft shell pin and socket connectors 5.0 mm power key connectors .197 [5.00] centerline standard density material and finish housing 6/6 nylon, glass filled related product data receptacle contacts page 137 double lock plates page 137 mating headers page 140 plug housings (for receptacle contacts) section x-x type of keying/color applicable no. of double mating pos. ab type a type b type c type d lock plate header assy. natural red blue yellow part number part number 2 15 1376388-1 1-1376388-2 2-1376388-3 3-1376388-4 1376394-1 -1376382- 3 20 10 1376389-1 1-1376389-2 2-1376389-3 3-1376389-4 1376395-1 -1376383- -1376421- 4 25 15 1376390-1 1-1376390-2 2-1376390-3 3-1376390-4 1376396-1 -1376384- 6 35 25 1376391-1 1-1376391-2 2-1376391-3 3-1376391-4 1376397-1 -1376385- note: dimensions shown are metric. note: all part numbers are rohs compliant. plug housing part no. type of keying/color dimensions
139 catalog 82181 dimensions are in inches and dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 4-08 millimeters unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 5.0 mm power key connectors (5.0 pkc) (wire-to-board) (continued) amp soft shell pin and socket connectors 5.0 mm power key connectors .197 [5.00] centerline standard density material and finish housing 6/6 nylon, glass filled related product data receptacle contacts page 137 double lock plates page 137 mating headers page 141 plug housing (2 rows) (for receptacle contacts) section x-x type of keying/color applicable no. of double mating pos. ab type a type b type c type d lock plate header assy. natural red blue yellow part number part number 4 15 1376392-1 1-1376392-2 2-1376392-3 3-1376392-4 1376394-1 -1376386- 6 20 10 1376393-1 1-1376393-2 2-1376393-3 3-1376393-4 1376395-1 -1376387- note: dimensions shown are metric. note: all part numbers are rohs compliant. plug housing part no. type of keying/color dimensions
140 catalog 82181 dimensions are in inches and dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 4-08 millimeters unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 5.0 mm power key connectors (5.0 pkc) (wire-to-board) (continued) amp soft shell pin and socket connectors 5.0 mm power key connectors .197 [5.00] centerline standard density material and finish housing 6/6 nylon, glass filled tab contacts -copper alloy, tin plated related product data mating plug housings page 138 vertical header assembly type of keying/color section x-x pc board layout no. of mating pos. ab tube type a type b type c type d plug housing (qty.) natural red blue yellow part number 2 11.6 l.p 1376382-1 1-1376382-2 2-1376382-3 3-1376382-4 -1376388- tube 1376437-1 (40) 1-1376437-2 (40) 2-1376437-3 (40) 3-1376437-4 (40) 3 16.6 10 l.p 1376383-1 1-1376383-2 2-1376383-3 3-1376383-4 -1376389- tube 1376439-1 (25) 1-1376439-2 (25) 2-1376439-3 (25) 3-1376439-4 (25) 4 21.6 15 l.p 1376384-1 1-1376384-2 2-1376384-3 3-1376384-4 -1376390- tube 1376440-1 (20) 1-1376440-2 (20) 2-1376440-3 (20) 3-1376440-4 (20) 6 31.6 25 l.p 1376385-1 1-1376385-2 2-1376385-3 3-1376385-4 -1376391- tube 1376441-1 (15) 1-1376441-2 (15) 2-1376441-3 (15) 3-1376441-4 (15) 2* 16.6 10 l.p 1376421-1 1-1376421-2 2-1376421-3 3-1376421-4 -1376389- tube 1376444-1 (25) 1-1376444-2 (25) 2-1376444-3 (25) 3-1376444-4 (25) *10 mm centerline note: dimensions shown are metric. note: all part numbers are rohs compliant. vertical header assy. part no. type of keying/color dimensions loose piece
141 catalog 82181 dimensions are in inches and dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 4-08 millimeters unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 5.0 mm power key connectors (5.0 pkc) (wire-to-board) (continued) amp soft shell pin and socket connectors 5.0 mm power key connectors .197 [5.00] centerline standard density material and finish housing 6/6 nylon, glass filled tab contacts copper alloy, tin plated related product data mating plug housings page 139 vertical header assembly (2 rows) type of keying/color section x-x pc board layout no. of mating pos. ab tube type a type b type c type d plug housing (qty.) natural red blue yellow part number 4 11.6 l.p 1376386-1 1-1376386-2 2-1376386-3 3-1376386-4 -1376392- tube 1376442-1 (40) 1-1376442-2 (40) 2-1376442-3 (40) 3-1376442-4 (40) 6 16.6 10 l.p 1376387-1 1-1376387-2 2-1376387-3 3-1376387-4 -1376393- tube 1376443-1 (25) 1-1376443-2 (25) 2-1376443-3 (25) 3-1376443-4 (25) note: dimensions shown are metric. note: all part numbers are rohs compliant. vertical header assy. part no. type of keying/color dimensions loose piece
142 catalog 82181 dimensions are in inches and dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 4-08 millimeters unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 engineering notes amp soft shell pin and socket connectors
143 catalog 82181 dimensions are in inches and dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 4-08 millimeters unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 .093 [2.36] commercial pin and socket connectors amp soft shell pin and socket connectors standard density .093 [2.36] commercial pin and socket connectors .198 [5.03] centerline product facts polarized cavity identification low contact-mating force dual locking lances detent and positive locking contacts available in brass and phosphor bronze with tin and gold plating panel mounting and free- hanging styles f crimp contacts applicator and hand tool available economical commercial- grade connectors compatible with high-speed application machinery and competitive soft shells wire range 24 to 14 awg [0.2 to 2 mm 2 ] accepts wires with insulation diameters as large as .180 [4.57] housings available in 1 to 15 positions .093 plug and receptacle housings accept pin or socket contacts. the preferred convention is to use socket contacts with receptacle housings not for interrupting current recognized under the component program of underwriters laboratories inc., file no. e28476 certified by canadian standards association, file no. lr 7189 r r performance characteristics the .093 commercial pin and socket connectors performance characteristics found on pages 143-144 are based on free-hanging and panel mount connec- tors, loaded with contacts crimped on stranded wire. thermal shock -55c to +105c temperature-humidity cycling +25c to +65c at 90C95% rh corrosion 48 hr. at 5% salt concentration vibration 10-55-10 cycles per minute at .06 [1.52] total excursion physical shock 18 shocks, 50 gs sawtooth in 11 milliseconds durability 50 mating cycles dielectric withstanding voltage 1.0 kvac insulation resistance 1000 megohms min. initial voltage rating 250 v ac or dc connector mating 2.5 lb. [11.1 n] max. per contact connector unmating 1.5 lb. [6.7 n] min. per contact contact retention 10 lb. [44.5 n] min. technical documents application specification 114-49000 .093 commercial pin and socket connectors product specification 108-1038 .093 commercial pin and socket connectors
144 catalog 82181 dimensions are in inches and dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 4-08 millimeters unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 .093 [2.36] commercial pin and socket connectors (continued) amp soft shell pin and socket connectors .093 [2.36] commercial pin and socket connectors .198 [5.03] centerline standard density performance characteristics (continued) maximum current maximum cur- rent rating of .093 commercial pin and socket connectors is limited by the maximum operating temperature of the housings which is 105c including the temperature rise of the contacts which is a maximum of 30c. there are several variables which have a direct effect on this maximum current-carrying capability for a given connector and must be considered for each application. these variables are: wire size larger diameter wire will carry more current since it has less internal resistance to current flow and thus generates less heat. longer wire lengths also enhance current-carrying capabilities since the wire conducts heat away from the connector. connector size in general, the more circuits in a connector, the less current can be carried. ambient temperature the higher the ambient temperature, the less current can be carried in any given connector. related product data product specification 108-1038 termination contact wire size crimp resistance tensile force test resistance force (min.) awg mm 2 current milliohms (amps) (max. init.) lbs. n 24 0.2 2.0 4.0 8 35.6 22 0.3C0.4 3.0 4.0 10 44.5 20 0.5C0.6 4.5 4.0 15 66.7 18 0.8C0.9 6.0 3.5 25 111.2 16 1.25C1.4 8.0 3.5 25 111.2 14 2 10.0 3.0 30 133.4 note: this is the total resistance between wire crimps of a mated pin and socket. current rating verification for 30c maximum temperature rise 100% energized wire-to-wire .093 commercial pin and socket connectors calculated current table number of wire awg circuits 14 16 18 20 22 24 2 13.00 12.00 11.00 8.00 6.00 6.00 3 13.00 11.00 10.00 8.00 6.00 5.00 4 in-line 11.00 10.00 9.00 7.00 5.00 4.00 4 matrix 11.00 10.00 9.00 7.00 5.00 4.00 5 10.00 9.00 8.00 6.00 5.00 4.00 6 10.00 9.00 8.00 6.00 4.00 4.00 9 9.00 7.00 6.00 5.00 4.00 3.00 12 8.00 7.00 6.00 4.00 3.00 3.00 15 7.00 6.00 5.00 4.00 3.00 3.00 values are based on initial temperature rise versus current testing and are intended to be a guide in the selection of a connector family. all applications should be tested by the end user. the values listed are per circuit for fully loaded housings being 100% energized. note: all combinations were not tested and this chart contains interpolated and extrapolated values. termination resistance/contact crimp tensile force minimum wire lengths for t-rise vs. current testing awg min. length (in.) awg min. length (in.) 30 2.6 18 9.4 28 3.2 16 11.3 26 4.1 14 13.7 24 5.1 12 16.4 20 7.8 10 19.3 note: if wire lengths used are less than those listed above, the current- carrying ability of the system will be reduced due to less heat being conducted away from the connector. the customer should fully test all applications.
145 catalog 82181 dimensions are in inches and dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 4-08 millimeters unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 .093 [2.36] commercial pin and socket connectors (continued) amp soft shell pin and socket connectors standard density .093 [2.36] commercial pin and socket connectors .198 [5.03] centerline contacts pin diameter .093 [2.36] material .010 [0.25] stock thickness pin and socket contacts can be used in either plug or receptacle housings. related product data product specification 108-1038 application specification 114-49000 performance characteristics pages 143-144 housings .198 [5.03] centerlinepages 146-147 .250 [6.35] centerlinepages 148-149 panel cutouts .198 [5.03] centerline housings page 147 .250 [6.35] centerline housings page 148 technical documents pages 143 and 205-206 application tooling pages 207-210 pin socket pin part no. 770385-1 socket part no. 770383-1 contact insertion tool (for pins and sockets) part no. 91002-1 is 408-7347 contact part numbers hdm wire size ins. dia. material pin socket applicator hand tool awg mm 2 & finish part part no. strip form loose piece strip form loose piece no. brass, pre-tin 350418-1 770147-1 350417-1 770146-1 466656-1 5 24C18 0.2C0.9 .110 brass, 2.79 gold 2 350417-3 2 770146-3 2 466656-2 5 90872-1 brass select gold 1 350418-5 1 770147-5 1 350417-5 1 770146-5 1 466656-3 5 brass, pre-tin 350416-1 770145-1 350415-1 770144-1 466878-1 5 .140 brass, 3.56 select gold 1 350416-5 1 770145-5 1 350415-5 1 770144-5 1 466878-2 5 90871-1 20C14 0.6C2 phos. brz., pre-tin 350415-6 770144-6 466878-3 5 .180 brass, 567337-3 6 770530-1 4 770529-1 4 567337-4 6 4.57 pre-tin 567337-6 6 18C14 0.8C2 .180 brass, 567273-2 7 or or 4.57 pre-tin 770385-1 3 22 (per phos. brz., 567273-3 7 (18) (0.8C0.9) wire) pre-tin 770383-1 3 567273-4 7 1 select gol d .000030 [.000762] min gold in mating area over .000050 [.00127] min nickel. 2 gold .000030 [.000762] min gold in mating area, overall gold flash over .000050 [.00127] min nickel. 3 these contacts have a .0125 [.318] stock thickness and accept two wires, each with maximum .180 [4.57] insulation diameters. they can be used only with the following housing part numbers: 770364-1, 770365-1, 770450-1, 770451-1, 770452-1, and 770453-1 (see page 143). 4 contact length is .875 [22. 23] 5 hdm applicator part number ending in -1 is used on ampomator cls machine with t or g terminators, -2 is used on amp-o-lectric model k machine, -3 is used on amp-o-lectric model g machine. see pages 207-210 for further information. 6 hdm applicator part number ending in -3 is used on ampomator cls machine with t or g terminators, -4 is used on amp-o-lectric model k machine, -6 is used on amp-o-lectric model g machine. see pages 207-210 for further information. 7 hdm applicator part number ending in -3 is used on ampomator cls machine with t or g terminators, -2 is used on amp-o-lectric model k machine, -4 is used on amp-o-lectric model g machine. see pages 207-210 for further information. note: phosphor bronze contacts should be used in high-temperature/humidity cycling applications. note: all part numbers are rohs compliant. .780 [ 19.81 ] .973 [ 24.71 ] .780 [ 19.81 ] .973 [ 24.71 ] contact extraction tool part no. 318837-1 is 408-4375
146 catalog 82181 dimensions are in inches and dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 4-08 millimeters unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 .093 [2.36] commercial pin and socket connectors (continued) amp soft shell pin and socket connectors .093 [2.36] commercial pin and socket connectors .198 [5.03] centerline standard density housings free-hanging or panel mount .198 [5.03] centerline spacing material housing nylon, natural color flammability rating ul94-v-2 related product data contacts page 145 product specification 108-1038 receptacle plug receptacle plug 2, 3, and 4 circuit, in-line receptacle part numbers plug part numbers no. of a dimension panel mount free-hanging circuits receptacle plug without with without with panel free- detents detents detents detents mount hanging 1 770063-1 770064-1 .540 .640 770065-1 1,5 2 13.72 16.26 770066-1 1,5 770266 1,3,5 770068-1 1 770069-1 1 .670 .770 770070-1 3 17.02 19.56 770071-1 770264-1 3 770073-1 770074-1 4 .870 .970 (in-line) 22.10 24.64 770076-1 770075-1 770077-1 770078-1 4 .443 .540 (matrix) 11.25 13.71 770843-1 770842-1 1.070 1.170 770083-1 5 27.18 29.72 794015-1 3 770084-1 6 1.268 1.378 (in-line) 32.21 35.00 770782-1 4 770892-1 4 6 .435 .535 (matrix) 11.05 13.59 770085-1 770087-1 770088-1 770086-1 770089-1 770090-1 .670 .770 770092-1 770095-1 2 9 17.02 19.56 770091-1 770093-1 770094-1 770108-1 770096-1 .870 .970 12 22.10 24.64 770097-1 770099-1 770100-1 770098-1 770101-1 770102-1 1.070 1.170 15 27.18 29.72 770103-1 770105-1 770106-1 770107-1 1 .248 [6.30] centerline. 2 mounting ears at wire end. 3 tool removable. 4 positive lock. 5 600 v ac or dc note: all part numbers are rohs compliant. .970 [ 24.64 ] .245 [ 6.22 ] .360 [ 9.14 ] 198 5.03 ] typ. 1.095 [ 27.81 ] .340 [ 8.64 ] a panel-mount flange .198 [ 5.03 ] typ. a 1.125 [ 28.58 ] .240 [ 6.10 ] .240 [ 6.10 ] 1.000 [ 25.40 ] 1 circuit
147 catalog 82181 dimensions are in inches and dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 4-08 millimeters unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 .093 [2.36] commercial pin and socket connectors (continued) amp soft shell pin and socket connectors standard density .093 [2.36] commercial pin and socket connectors .198 [5.03] centerline housings free-hanging or panel mount .198 [5.03] centerline spacing material housing nylon, natural color flammability rating ul94v-2 related product data contacts page 145 product specification 108-1038 receptacle (free-hanging) plug (free-hanging) 4, 6, 9, 12, and 15 circuit, matrix receptacle plug panel cutout dimensions no. of receptacle plug circuits abab .312 .725 .375 .800 2 7.92 18.42 9.53 20.32 .312 .840 .375 .933 3 7.92 21.34 9.53 23.70 4 .312 1.038 .375 1.131 (in-line) 7.92 26.37 9.53 28.73 .600 .718 .695 .750 6 15.24 18.24 17.65 19.05 .725 .828 .660 .937 9 18.42 21.03 16.76 23.80 .725 1.050 .760 1.155 12 18.42 26.67 19.30 29.34 .655 1.240 .760 1.343 15 16.64 31.50 19.30 34.11 note: the panel should be punched so that the housing enters in the same direction as the punch. recommended panel cutouts maximum panel thickness is .090 [2.29]. .198 [5.03] .430 [10.92] .630 [16.0] .198 [5.03] .198 [5.03] .198 [5.03] .735 .010 [18.67 0.25 ] .535 .010 [13.59 0.25 ] .340 [ 8.64 ] 1.170 [ 29.72 ] .198 [ 5.03 ] typ. 1.095 [ 27.81 ] .240 [ 6.10 ] 1.070 [ 27.18 ] .198 [ 5.03 ] typ. 1.125 [ 28.58 ] b a 5 circuit, in-line 1.000 .010 [25.4 0.25 ] .970 .010 [24.64 0.25 ]
148 catalog 82181 dimensions are in inches and dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 4-08 millimeters unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 .093 [2.36] commercial pin and socket connectors (continued) amp soft shell pin and socket connectors .093 [2.36] commercial pin and socket connectors .198 [5.03] centerline standard density housings free-hanging or panel mount .250 [6.35] centerline spacing material housing nylon, natural color flammability rating ul94v-2 voltage rating 600 v ac or dc related product data contacts page 145 product specification 108-1038 receptacle plug receptacle plug receptacle plug recommended panel cutouts maximum panel thickness is .062 [1.57]. note: the panel should be punched so that the housing enters in the same direction as the punch. 4 circuit, in-line 3 circuit, in-line 6 circuit, matrix receptacle part numbers plug part numbers no. of panel free- panel free- circuits mount hanging mount hanging 3 770269-1 770339-1 770338-1 770276-1 770771-1 1 4 770329-1 770337-1 770330-1 770336-1 6 770372-1 770360-1 770373-1 770361-1 1 pre-bent mounting ears. panel cutout dimensions no. of receptacle plug circuits abab .310 .920 .365 1.022 3 7.87 23.37 9.27 25.96 .310 1.168 .365 1.270 4 7.87 29.67 9.27 32.26 .608 .946 .658 1.048 6 15.44 24.03 16.71 26.62 .250 [ 6.35 ] typ. .790 20.07 ] panel-mount flange 1.145 [ 29.08 ] 545 3.84 ] max. .250 [ 6.35 ] .641 [ 16.28 ] .886 [ 22.50 ] .250 [ 6.35 ] .250 [ 6.35 ] typ. 1.105 [ 28.07 ] panel-mount flange 1 1.112 [ 28.24 ] 1.100 [ 27.94 ] panel-mount flange .350 [ 8.89 ] max. .250 [ 6.35 ] typ. .350 [ 8.89 ] .250 [ 6.35 ] .862 [ 21.89 ] panel-mount flange 1.100 [ 27.94 ] .250 [ 6.35 ] typ. .765 [ 19.43 ] .255 [ 6.48 ] max. 1.140 [ 28.96 ] panel-mount flange 1.005 [ 25.53 ] 1.140 [ 28.97 ] panel-mount flange 250 6.35 ] typ. .255 [ 6.48 ] b a note: all part numbers are rohs compliant.
149 catalog 82181 dimensions are in inches and dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 4-08 millimeters unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 .093 [2.36] commercial pin and socket connectors (continued) amp soft shell pin and socket connectors standard density .093 [2.36] commercial pin and socket connectors .198 [5.03] centerline housings free-hanging or panel mount .250 [6.35] centerline spacing material housing nylon, natural color flammability rating ul94v-2 voltage rating 600 v ac or dc related product data contacts page 145 product specification 108-1038 receptacle plug receptacle part numbers plug part numbers no. of panel free- panel free- circuits mount hanging mount hanging 2 770364-1 1 770365-1 1 3 770453-1 2 770451-1 770452-1 2 770450-1 1 .248 [6.30] centerline. 2 see panel cutout dimensions on page 58. dual wire 2 circuit, in-line positive lock 2, 3 and 4 circuit, in-line no. of receptacle part numbers plug part numbers circuits free-hanging free-hanging 2 770424-1 1 770425-1 1 3 770785-1 770783-1 4 770784-1 770810-1 1 .248 [6.30] centerline. receptacle plug receptacle plug .248 [ 6.30 ] .255 [ 6.48 ] 1.073 [ 27.25 ] .536 [ 13.61 ] .248 [ 6.30 ] 1.041 [ 26.44 ] .666 [ 16.92 ] .350 [ 8.89 ] .862 [ 21.89 ] .250 [ 6.35 ] .500 [ 12.70 ] panel-mount flange 1.275 [ 32.39 ] .255 [ 6.48 ] max. .250 [ 6.35 ] typ. .765 [ 19.43 ] .500 [ 12.70 ] panel-mount flange 1.315 [ 33.40 ] .248 [ 6.30 ] .445 [ 11.30 ] 1.245 [ 31.62 ] .545 [ 13.84 ] .248 [ 6.30 ] 1.250 [ 31.57 ] .650 [ 16.51 ] .555 [ 14.10 ] 3 circuit, in-line note: all part numbers are rohs compliant.
150 catalog 82181 dimensions are in inches and dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 4-08 millimeters unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 engineering notes amp soft shell pin and socket connectors
151 catalog 82181 dimensions are in inches and dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 4-08 millimeters unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 commercial mate-n-lok connectors amp soft shell pin and socket connectors commercial mate-n-lok connectors .200 [5.08] centerline standard density performance characteristics the commercial mate-n-lok connector performance characteristics found on pages 151-152 are based on free-hanging and panel mount connec- tors, loaded with contacts crimped on stranded wire. dielectric withstanding voltage 1.5 kvac between adjacent circuits insulation resistance 500 megohms minimum initial between adjacent circuits voltage rating 250 v ac or dc connector mating 4 lb. max. per circuit connector unmating 0.7 lb. min. per circuit contact retention 15 lb. min. per contact durability 50 cycles, mating and unmating product facts fully polarized nylon housings easy cavity identification locking devices are integral part of design. connector halves will hold together under severe conditions of vibration and shock built-in contact stabilization and self-aligning features hot side egg-crate design for safety precision molded to exact- ing tolerances contacts accept a wire size range of 30-14 awg [.05-2.0 mm 2 ] keying plug available clean design contact no sharp projections to impede insertion or damage housings low insertion/extraction forces contacts available in pre-tin or gold over nickel plated to fit the application require- ments wire-to-pc board capability using pin or socket headers solderabilityheaders meet mil-std 202 method 208 four circuit pc board-to-pc board capability available by mating vertical socket header with either vertical, right-angle or surface mount pin header four circuit insulation dis- placement connector (idc) available ultraviolet (uv) stable housings available in 1, 2 and 3 circuit not for interrupting current recognized under the component program of underwriters laboratories inc., file no. e28476 certified by canadian standards association, file no. lr 7189a r r technical documents product specifications 108-1000 commercial mate-n-lok connectors 108-1077 commercial mate-n-lok pc board headers 108-49000 idc connectors application specifications 114-1012 commercial mate-n-lok contacts 114-49001 idc connectors instruction sheets 408-7209, 408-7166, 408-7200, 408-7201, 408-7215, 408-3186, 408-7300
152 catalog 82181 dimensions are in inches and dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 4-08 millimeters unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 commercial mate-n-lok connectors (continued) amp soft shell pin and socket connectors commercial mate-n-lok connectors .200 [5.08] centerline standard density performance characteristics (continued) maximum current maximum cur- rent rating of commercial mate-n-lok connectors is limited by the maximum operating temperature of the housings which is 105c including the tempera- ture rise of the contacts which is a maximum of 30c. there are several variables which have a direct effect on this maximum current-carrying capabil- ity for a given connector and must be considered for each application. these variables are: wire size larger diameter wire will carry more current since it has less internal resistance to current flow and thus generates less heat. longer wire lengths also enhance current-carrying capabilities since the wire conducts heat away from the connector. connector size in general, the more circuits in a connector, the less current can be carried. ambient temperature the higher the ambient temperature, the less current can be carried in any given connector. printed wiring board conductor size the finished trace conductor width and thickness should be maxi- mized to allow for the greatest current- carrying capacity and heat dissipation. commercial mate-n-lok connectors also will withstand the following tests: vibration 10-55-10 cycles per minute at .06 inch total excursion physical shock 18 drops, 50 g sawtooth at 11 milliseconds housing panel mount retention 40 lb. min. 3 and 4 circuit 65 lb. min. 6, 9, 12, and 15 circuit housing lock strength with positive locking devices engaged 25 lb. min. thermal shock -55c to +85c temperature-humidity cycling 25c to 65c at 95 rh corrosion 48 hr. at 5% salt concentration related product data product specifications 108-1000 commercial mate-n-lok connectors 108-1077 commercial mate-n-lok pc board headers current rating verification for 30c maximum temperature rise 100% energized wire-to-wire motor mount calculated current table number of wire gauge circuits 14 16 18 20 22 24 30 6 13.00 10.50 9.50 7.50 6.00 5.00 2.50 8 12.00 9.50 8.50 7.00 5.50 4.50 2.50 10 11.00 9.00 8.00 6.50 5.00 4.50 2.00 12 10.50 8.50 7.50 6.00 5.00 4.00 2.00 16 9.50 8.00 7.00 5.50 4.50 3.50 2.00 values are based on initial temperature rise versus current testing and are intended to be a guide in the selection of a con- nector family. all applications should be tested by the end user. the values listed are per circuit for fully loaded housings being 100% energized. note: all combinations were not tested, and this chart contains interpolated and extrapolated values. calculated current table number of wire gauge circuits 14 16 18 20 22 24 30 1 19.00 15.50 14.00 11.00 9.00 7.50 4.00 2 18.00 14.50 13.00 10.50 8.50 7.00 4.00 3 16.00 13.00 12.00 9.50 7.50 6.50 3.50 4 15.00 12.50 11.00 9.00 7.00 6.00 3.00 6 matrix 13.00 10.50 9.50 7.50 6.00 5.00 3.00 8 12.50 10.50 9.00 7.50 6.00 5.00 2.50 9 11.00 9.00 8.00 6.50 5.50 4.50 2.50 10 12.00 9.50 8.50 7.00 5.50 4.50 2.50 12 10.50 8.50 7.50 6.00 5.00 4.00 2.00 15 9.50 8.00 7.00 5.50 4.50 4.00 2.00 values are based on initial temperature rise versus current testing and are intended to be a guide in the selection of a con- nector family. all applications should be tested by the end user. the values listed are per circuit for fully loaded housings being 100% energized. note: all combinations were not tested, and this chart contains interpolated and extrapolated values. termination contact resistance crimp wire size test resistance tensile force awg mm 2 current milliohms force (min.) (amps) (max. init.) lbs. n 30 .05 .50 4.00 29 28 .08 .75 3.50 3 13 26 .12 1.00 3.50 7 31 24 .2 1.5 3.50 10 44 22 .3 3 3.50 15 67 20 .5 4.5 3.00 20 89 18 .8 6 3.00 30 133 16 1.2 8 2.75 30 133 14 2.0 10 2.75 35 156 note: this is the total resistance between wire crimps of a mated pin and socket. wire-to-board due to the vast differences in trace geometry and printed circuit board configurations, we are unable to provide a separate current carrying chart for our printed circuit board header products. however, the above wire-to-wire charts may be used as a guideline for headers if the trace width and thickness is equal to the listed wire gauge. for vertical headers, only 95% of the wire-to-wire value should be used. for right-angle headers, only 75% of the wire-to-wire value should be used. the chart values are only a tool for connector selection and will require the customer to fully test their application. minimum wire lengths for t-rise vs. current testing awg min. length (in.) awg min. length (in.) 30 2.6 18 9.4 28 3.2 16 11.3 26 4.1 14 13.7 24 5.1 12 16.4 20 7.8 10 19.3 note: if wire lengths used are less than those listed above, the current carry- ing ability of the system will be reduced due to less heat being conducted away from the connector. the customer should fully test all applications. termination resistance/contact crimp tensile force
153 catalog 82181 dimensions are in inches and dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 4-08 millimeters unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 commercial mate-n-lok connectors (continued) amp soft shell pin and socket connectors commercial mate-n-lok connectors .200 [5.08] centerline standard density commercial mate-n-lok connector mating combinations connector part number mating connector part number pc board headers number flammability housing connector housing housing vertical vertical of rating style type part no. part no. type pin right-angle socket circuits plating standard long pin standard long tail tail tail tail 1-480350-0 pin: fh socket: fh 1-480349-0 1-480351-0 pin: fh 1 ul94v-2 in-line positive lock socket: fh 1-480400-0 1-480401-1 pin: fh uv stable uv stable socket: fh 1-480318-0 1-480319-0 pin: fh pre-tin 350209-1 350422-1 794120-1 duplex 1 1586512-2 socket: fh 1-480393-1 1-480498-1 pin: fh 2 ul94v-2 in-line uv stable uv stable socket: fh 1-480720-0 794012-1 pin: fh pre-tin 350539-1 350540-1 positive lock positive lock duplex 1 1586530-2 socket: fh 1-480303-0 pre-tin 350210-1 350423-1 643488-1 1-480305-0 pin: fh duplex 1 1586514-2 socket: pm 1-480304-0 3 ul94v-2 in-line socket: fh 1-480721-0 pre-tin 350541-1 350542-1 positive lock duplex 1 1586532-2 socket: fh 1-480388-0 1-480387-0 pin: fh uv stable uv stable 4 see next page for 4 position mating combinations 1-480340-0 pin: fh pre-tin 1-380999-0 350425-1 socket: fh 1-480270-0 positive lock positive lock 1-480271-0 pin: mm duplex 1 2-1586546-0 1586526-2 positive lock 6 ul94v-2 matrix socket: pm 1-480273-0 1-480276-0 pin: pm pre-tin positive lock positive lock duplex 1 pin: pm 1-480276-0 1-480273-0 socket: pm pre-tin 350641-1 350576-1 positive lock positive lock duplex 1 1-480345-0 pin: fh pre-tin 350212-1 350426-1 8 ul94v-2 dual socket: fh 1-480283-0 positive lock row positive lock 1-480284-0 pin: mm duplex 1 1586518-2 1586528-2 positive lock 9 ul94v-2 matrix pin: pm 1-480277-0 1-480274-0 socket: pm pre-tin 350642-1 350577-1 positive lock positive lock duplex 1 1-480339-0 pin: fh pre-tin 1-380991-0 350219-1 10 ul94v-2 dual socket: fh 1-480285-0 positive lock row positive lock 1-480286-0 pin: mm duplex 1 2-1586544-0 positive lock dual socket: mm 1-480287-0 1-480288-0 pin: mm pre-tin 350213-1 350220-1 12 ul94v-2 row positive lock positive lock duplex 1 1586520-2 1586524-2 matrix pin: pm 1-480278-0 1-480275-0 socket: pm pre-tin 350643-1 350578-1 positive lock positive lock duplex 1 15 ul94v-2 matrix pin: pm 1-480324-0 1-480323-0 socket: pm pre-tin 350644-1 350579-1 positive lock positive lock duplex 1 16 ul94v-2 dual socket: mm 1-480438-0 1-480439-0 pin: mm pre-tin 350214-1 350427-1 row positive lock positive lock duplex 1 1586522-2 1586529-2 fh: free-hanging pm: panel mount mm: motor mount 1 duplex finish plated with .000030 [.000762] min. gold in mating area, matte tin on solder tail end over .000050 [.00127] min. nickel underplate on entire contact. note: all part numbers are rohs compliant.
154 catalog 82181 dimensions are in inches and dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 4-08 millimeters unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 commercial mate-n-lok connectors (continued) amp soft shell pin and socket connectors commercial mate-n-lok connectors .200 [5.08] centerline standard density commercial mate-n-lok 4 position in-line mating combinations (note: these connectors are used by the disk drive industry.) connector part number mating connector part number socket connectors pc board pin headers flammability connector connector housing housing insulation pc board vertical right-angle rating type part no. part no. type plating displacement awg vertical connector socket standard long surface standard w/fixed w/fixed belt header tail tail mount belt reverse pol. socket pre-tin 350543-1 350544-1 housing 1-480772-0 positive lock duplex 1 1586534-2 1586536-2 socket 350211-1 641737-1 housing pre-tin 770328-1 3 350424-1 770829-1 174804-1 174552-1 detent 1-480424-0 1-480426-0 pin 770846-1 lock duplex 1 1586515-2 1586525-2 pin 1-480424-0 socket 770156-2 22 housing pre-tin 770156-3 18 770997-1 1-480426-0 1-480425-0 socket 770156-4 20 794287-1 2 ul94v-2 detent pm 770156-5 16 lock duplex 1 770526-1 18 pin housing socket detent lock 3-480426-0 3-480425-0 high high temp temp socket 770997-1 641737-1 1-480426-0 pin pre-tin 350211-1 350424-1 770829-1 174804-1 174552-1 header 794287-1 2 770846-1 insulation 770156-2 displacement 770156-3 pre-tin 350211-1 350424-1 770829-1 641737-1 174804-1 174552-1 connector 770156-4 1-480426-0 pin 770846-1 (idc) 770156-5 770526-1 duplex 1 1586515-2 1586525-2 socket 770827-1 794132-1 pin pre-tin 1-641737-1 housing insulation 794036-1 displacement 794036-2 794132-1 pre-tin 1-641737-1 connector 794036-3 ul94v-0 (idc) 794036-4 794036-1 18 right-angle 1-641737-1 770827-1 socket pre-tin 794036-2 20 794236-1 pin header 794036-3 22 794036-4 16 pm: panel mount 1 duplex finish plated with .000030 [.000762] min. gold in matting area, matte tin on solder tail end over .000050 [.00127] min. nickel underplate on entire contact. 2 surface mount compatible. 3 with drainholes note: all part numbers are rohs compliant.
155 catalog 82181 dimensions are in inches and dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 4-08 millimeters unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 commercial mate-n-lok connectors (continued) amp soft shell pin and socket connectors commercial mate-n-lok connectors .200 [5.08] centerline standard density wire size ins. dia. contact part numbers hdm hand tool range material & finish pin socket applicator awg [mm 2 ] range strip form loose piece strip form loose piece part no. part no. 30-22 .040-.075 brass, pre-tin 350079-1 61174-1 350078-1 61173-1 466426-1 3 [.05-.3] 1.02-1.91 phos. brz., pre-tin 350079-4 350078-4 61173-4 466426-2 3 91515-1 brass, gold 1 350079-5 61174-5 350078-5 61173-5 466426-3 3 brass, pre-tin 61116-1 60618-1 61314-1 60617-1 24-18 .060-.100 phos. brz., pre-tin 61116-4 60618-4 61314-4 60617-4 466320-1 3 91512-1 brass, gold 1 61116-5 60618-5 61314-5 60617-5 466320-2 3 [.2-.8] 1.52-2.54 phos. brz., select gold 2 61116-6 60618-6 61314-6 60617-6 466320-4 3 91528-1 4 brass, select gold 2 61116-7 61314-7 brass, pre-tin 61118-1 60620-1 61117-1 60619-1 20-14 .100-.130 phos. brz., pre-tin 61118-4 60620-4 61117-4 60619-4 687763-1 3 brass, gold 1 61118-5 60620-5 61117-5 60619-5 687763-2 3 91504-1 [.5-2.0] 2.54-3.30 phos. brz., gold 1 61118-6 61117-6 60619-7 687763-6 3 brass, select gold 2 61118-7 61117-7 (2) 18 [.8] or (2) .115 max. brass, pre-tin 350558-1 350639-1 350557-1 687898-1 3 (1) 18 [.8] and 2.92 687898-2 3 91504-1 (1) 16 [1.2] (stacked) phos. brz., pre-tin 350558-4 350557-4 350638-4 687898-4 3 1 gold finish plated with .000030 [.000762] min. gold in mating area and inside wire barrel over .000050 [.00127] min. nickel underplate on entire contact. 2 select gold finish plated with .000030 [.000762] min. gold in mating area over .000050 [.00127] min. nickel underplate on entire contact. 3 hdm applicator part number ending in -1 is used on ampomator cls machine with t or g terminators, -2 is used on amp-o-lectric model k machine; -3, -4, or -6 is used on amp-o-lectric model g machine. see pages 207-210 for further information. 4 use hand tool no. 91528-1 for .043-.075 [1.09-1.90] insulation diameter. notes: 1. extraction tools: pins no. 1-305183-1 (is 408-7158); sockets no. 1-305183-2 (is 408-7158); pins and sockets no. 465644-1 (is 408-7211) 2. insertion tools: no. 455830-1 (is 408-7984) contacts pin diameter .084 [2.13] stock thickness .012 [.305] these contacts are to be used in commercial mate-n-lok housings only. related product data product specification 108-1000 commercial mate-n-lok connectors application specification 114-1012 commercial mate-n-lok contacts performance characteristics pages 151-152 housings pages 157-159 technical documents pages 151 and 205-206 application tooling pages 207-210 pin socket commoning tabs material and finish brass, tin plated stock thickness .008 [.203] .805 [20.44] .695 [17.65] a b .170 [4.32] .008 [.203] number of dimensions part holes ab number 2 .377 .203 60843-1 9.58 5.16 2 .355 .195 350444-1 9.02 4.95 3 .579 .203 60842-1 14.71 5.16 3 .550 .195 350444-2 13.97 4.95 note: commoning tabs are designed to be used with pin housings. note: all part numbers are rohs compliant.
156 catalog 82181 dimensions are in inches and dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 4-08 millimeters unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 commercial mate-n-lok connectors (continued) amp soft shell pin and socket connectors commercial mate-n-lok connectors .200 [5.08] centerline standard density contacts pin diameter .084 [2.13] stock thickness .012 [.305] these contacts are to be used in commercial mate-n-lok housings only. related product data product specification 108-1000 commercial mate-n-lok connectors application specification 114-1012 commercial mate-n-lok contacts performance characteristics pages 151-152 housings pages 157-159 technical documents pages 151 and 205-206 application tooling pages 207-210 part number 200821-1 note: keying plug snaps into socket housing pin socket keying plug is 408-7582 material housing nylon, natural color flammability rating ul94v-2 1.000 [2.54] part numbers type of contact l dim. material & finish pin socket pin socket loose piece loose piece pc board 1.110 1.010 phos. brz., pre-tin 61518-1 1 61320-1 1 [28.19] [25.65] 1.210 1.110 phos. brz., pre-tin [30.73] [28.19] 350074-1 2 350073-1 2 1 for .062 [1.57] max. board thickness board hole size .057 [1.45] 2 for .125 [3.14] max. board thickness board hole size .057 [1.45] l l .900 [22.86] grounding pin (.095 [2.41] longer than standard pin) (mate first, break last, not for interrupting current) pc board contacts wire size range ins. dia. contact part numbers hdm hand tool material & finish applicator awg [mm 2 ] range strip form loose piece part no. part no. 24-18 .060-.100 466320-1 1 brass, pre-tin 61527-2 466320-2 1 91512-1 [.2-.8] 1.52-2.54 466320-4 1 1 hdm applicator part number ending in -1 is used on ampomator cls machine with t or g terminators, -2 is used on amp-o-lectric model k machine; -3, -4, or -6 is used on amp-o-lectric model g machine. see pages 207-210 for further information. note: all part numbers are rohs compliant.
157 catalog 82181 dimensions are in inches and dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 4-08 millimeters unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 commercial mate-n-lok connectors (continued) amp soft shell pin and socket connectors commercial mate-n-lok connectors .200 [5.08] centerline standard density housings free-hanging .200 [5.08] centerline spacing material housing nylon, natural color flammability rating ul94v-2 related product data product specification 108-1000 commercial mate-n-lok connectors performance characteristics pages 151-152 contacts pages 155-156 commoning tabs page 155 keying plug page 156 technical documents pages 151 and 205-206 mating pin headers pages 161-164 mating socket headers page 162 mating idc page 163 1 circuit pin housing (cap) pin housing (cap) positive lock socket housing (plug) number of dimensions part numbers circuits abcdef pin housing (cap) socket housing (plug) .300 1.200 .260 .870 1-480350-0 1 1-480349-0 7.62 30.48 6.60 22.10 1 .300 1.240 .260 .870 1-480351-0 2 1-480349-0 7.62 31.49 6.60 22.10 .300 1.325 .260 .995 1-480401-0 1,3 1-480400-0 3 7.62 33.65 6.60 25.27 .610 .930 .330 .530 .860 .295 1-480319-0 1,5 1-480318-0 5 15.49 23.62 8.38 13.46 21.84 7.49 2 .610 .930 .330 .530 .860 .295 1-480498-1 1,3,5 1-480393-1 3,5 15.49 23.62 8.38 13.46 21.84 7.49 .810 .930 .325 .825 .850 .290 1-480305-0 1,5 1-480303-0 5 20.57 23.62 8.25 20.95 21.60 7.37 3 .810 .930 .325 .825 .850 .290 1-480387-0 1,3,5 1-480388-0 3,5 20.57 23.62 8.25 20.95 21.60 7.37 1.010 .930 .330 1.030 .850 .310 1-480426-0 1,5,6 1-480424-0 5,6 4 25.65 23.62 8.38 26.16 21.60 7.88 1.030 .850 .310 794132-1 4,5,6 770827-1 4,5,6 26.16 21.60 7.88 1 detent lock 2 positive lock 3 uv stable black color 4 housing material ul94v-0 rated 5 housing accepts double wire applications where individual insulation diameters do not exceed .115 [2.92]. 6 used by the disk drive industry. pin housing (cap) detent lock socket housing (plug) 2, 3 and 4 circuit, in-line b c a b e d f b a a e d .200 [5.08] note: all part numbers are rohs compliant.
158 catalog 82181 dimensions are in inches and dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 4-08 millimeters unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 commercial mate-n-lok connectors (continued) amp soft shell pin and socket connectors commercial mate-n-lok connectors .200 [5.08] centerline standard density housings free-hanging, positive lock material housing nylon, natural color flammability rating ul94v-2 related product data product specification 108-1000 commercial mate-n-lok connectors performance characteristics pages 151-152 contacts pages 155-156 commoning tabs page 155 keying plug page 156 technical documents pages 151 and 205-206 mating headers pages 161-164 8 and 10 circuit, dual row pin housing (cap) socket housing (plug) a .195 [4.95] .785 [19.94] .360 [9.14] .930 [23.62] .725 [18.42] d .850 [21.60] 6 circuit, dual row pin housing (cap) socket housing (plug) .195 [4.95] .785 [19.94] .360 [9.14] .930 [23.62] .850 [21.59] .725 [18.41] a d number of dimensions part numbers circuits ad pin housing (cap) socket housing (plug) 6 .705 .610 1-480340-0 1-480270-0 1 17.91 15.49 8 .900 .805 1-480345-0 1-480283-0 1 22.86 20.44 10 1.095 1.000 1-480339-0 1-480285-0 1 27.81 25.40 1 housing accepts double wire applications where individual insulation diameters do not exceed .115 [2.92]. a .850 [21.59] .375 [9.52] .150 [3.81] .200 [5.08] number of a part numbers socket housing mates with mates with circuits dim. (plug) pin headers cap housing 2 .435 1-480720-0 350539, 350540 794012-1 11.04 3 .630 1-480721-0 350541 16.00 4 .830 1-480722-0 1 350543 1 , 350544 1 21.09 1 used by the disk drive industry. 2, 3, and 4 circuit, in-line .200 [5.08] centerline spacing socket housing (plug) note: all part numbers are rohs compliant.
159 catalog 82181 dimensions are in inches and dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 4-08 millimeters unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 commercial mate-n-lok connectors (continued) amp soft shell pin and socket connectors commercial mate-n-lok connectors .200 [5.08] centerline standard density housings panel mount, positive lock material housing nylon, natural color flammability rating ul94v-2 related product data product specification 108-1000 commercial mate-n-lok connectors performance characteristics pages 151-152 contacts pages 155-156 commoning tabs page 155 keying plug page 156 technical documents pages 151 and 205-206 mating socket headers page 162 mating idc page 163 recommended panel cutout for panel mount socket housing view is from socket housing entry side mounting information 1. recommended panel thickness .025-.065 [.635-1.65]. 2. both locking legs are to be squeezed together and the hous- ing is to be inserted straight-in, as opposed to a rocking manner. 3. the panel should be punched so that the housing enters the panel in the same direction as the punch. 4. the panel must not have any material (paint, porcelain, etc.) applied in the mounting hole area that would decrease the retention of the housing in the panel. 5. if the two items above are not complied with, the a dimension should be reduced .020 [5.08] for proper retention. 3 and 4 circuit, in-line 3 and 4 circuit, in-line 6, 9, 12 and 15 circuit, matrix pin housing (cap) socket housing (plug) number of dimensions part numbers circuits efg pin housing (cap) socket housing (plug) 3 .325 .810 .630 1-480305-0 2 1-480304-0 8.26 20.57 16.00 4 .330 1.010 .825 1-480426-0 2,4 1-480425-0 4 8.38 25.65 20.96 3-480426-0 1,2,4 3-480425-0 1,4 6 .665 .555 1-480276-0 3 1-480273-0 16.89 14.10 9 .905 .795 1-480277-0 3 1-480274-0 22.99 20.19 12 1.145 1.045 1-480278-0 3 1-480275-0 29.08 26.54 15 1.382 1.280 1-480324-0 3 1-480323-0 35.10 32.51 1 housing material has 125c temperature rating 2 detent lock 3 positive lock 4 used by disk drive industry note: all part numbers are rohs compliant. number dimensions circuits ab 3 .890 .645C.635 22.61 16.38C16.13 4 1.100 .845C.835 27.94 21.46C21.21 6 .840 .575C.570 21.34 14.61C14.48 9 1.075 .815C.810 27.31 20.70C20.57 12 1.320 1.055C1.050 33.53 26.80C26.67 15 1.550 1.290C1.285 39.37 32.77C32.64 note: dimensions c and d are to be equal. 6, 9, 12 and 15 circuit, matrix .200 [5.08] .240 [6.09] .202 [5.130] .930 [23.62] .930 [23.62] .850 [21.59] .850 [21.59] .850 [21.59] .650 [16.51] .310 [7.87] e f f g g .215 [5.46] .015 [.381] all corners .275 [6.98] a a b b c c d d .660 [16.76] .219 [5.56] .218 [5.54] r max. .015 [.381] all corners r max. pin housing (cap) socket housing (plug)
160 catalog 82181 dimensions are in inches and dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 4-08 millimeters unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 commercial mate-n-lok connectors (continued) amp soft shell pin and socket connectors commercial mate-n-lok connectors .200 [5.08] centerline standard density number of dimensions part numbers circuits e f pin housing (cap) socket housing (plug) ul94v-2 nylon, natural color 6 .705 .610 1-480271-0 1-480270-0 1 17.90 15.49 8 .900 .805 1-480284-0 1-480283-0 1 22.86 20.45 10 1.095 1.000 1-480286-0 1-480285-0 1 27.81 25.4 12 1.290 1.195 1-480288-0 1-480287-0 32.77 30.35 16 1.680 1.585 1-480439-0 1-480438-0 42.67 40.26 1 housing accepts double wire applications where individual insulation diame- ters do not exceed .115 [2.92]. note: all part numbers are rohs compliant. number of a circuits dim. 6 .715 18.16 8 .910 23.11 10 1.105 28.07 12 1.300 33.02 16 1.690 42.93 mounting information 1. recommended panel thickness e is .040-.100 [1.02-2.54] and is dependent on t and r. 2. the pin housing must be inserted in a rocking manner. 3. the panel must be punched so that the housing enters the panel in the same direction as the punch. .585 [14.86] a a e r t section a-a a .015 [.381] all corners r max. note: motor mount housings may be used in flat panels motor mount, positive lock .195 [4.95] .785 [19.94] .360 [9.14] .930 [23.62] .850 [21.59] .725 [18.41] e f pin housing (cap) socket housing (plug) recommended panel cutout for motor mount pin housing view is from pin housing entry side. 6, 8, 10, 12 and 16 circuit, dual row
161 catalog 82181 dimensions are in inches and dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 4-08 millimeters unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 commercial mate-n-lok connectors (continued) amp soft shell pin and socket connectors commercial mate-n-lok connectors .200 [5.08] centerline standard density pc board vertical pin headers material housing nylon, natural color flammability rating ul94v-2 contacts phosphor bronze solder tail diameter .062 [1.57] related product data product specifications 108-1077 commercial mate-n-lok pc board headers performance characteristics pages 151-152 technical documents pages 151 and 205-206 mating socket housings pages 157-160 mating socket headers page 162 mating idc page 163 detent lock recommended pc board hole layout mounting dimensions recommended pc board hole layout mounting dimensions positive lock positive lock 2, 3, and 4 circuit, in-line 6, 8, 10, 12 and 16 circuit, dual row number of a type part numbers mates with standard 2 long 3 socket housing circuits dim. lock finish tail tail part number positive pre-tin 350539-1 350540-1 1-480720-0 2 .515 duplex 1 1586530-2 13.09 detent pre-tin 350209-1 350422-1 1-480318-0 duplex 1 1586512-2 positive pre-tin 350541-1 350542-1 1-480721-0 3 .715 duplex 1 1586532-2 18.17 detent pre-tin 350210-1 350423-1 1-480303-0 duplex 1 1586514-2 positive pre-tin 350543-1 5 350544-1 5 1-480722-0 5 duplex 1 1586534-2 5 1586536-2 5 .915 pre-tin 350211-1 5 350424-1 5 4 794236-1 5,8 1-480424-0 4,5 23.24 detent post-tin 1586627-1 5,6 1-1586627-1 5,6,7 duplex 1 1586515-2 5 1586525-2 5 6 .705 positive pre-tin 1-380999-0 350425-1 1-480270-0 17.91 duplex 1 2-1586546-0 1586526-2 8 .900 positive pre-tin 350212-1 350426-1 1-480283-0 22.86 duplex 1 1586518-2 1586528-2 10 1.095 positive pre-tin 1-380991-0 350219-1 1-480285-0 27.81 duplex 1 2-1586544-0 12 1.290 positive pre-tin 350213-1 350220-1 1-480287-0 32.77 duplex 1 1586520-2 1586524-2 16 1.680 positive pre-tin 350214-1 350427-1 1-480438-0 42.68 duplex 1 1586522-2 1586529-2 1 duplex finish plated with .000030 [.000762] min. gold in mating area, matte tin on solder tail end over .000050 [.00127] min. nickel underplate on entire contact. 2 use standard tail for .062 [1.57] thick pc board. 3 use long tail for .125 [3.18] thick pc board. 4 other mating connectors include a vertical pc board socket header and the insulation displacement connectors (idc). 5 used by the disk drive industry. 6 with drain holes. 7 tube loaded. 8 housing material ul94v-0 rated. note: all part numbers are rohs compliant. .330 [8.38] a a .375 [9.52] .375 [9.52] .200 [5.08] .330 [3.38] typ. .070 [1.78] .070 [1.78] .360 [9.14] .375 [9.14] .785 [19.93] a dia. typ. .195 [4.95] typ. dia. typ.
162 catalog 82181 dimensions are in inches and dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 4-08 millimeters unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 commercial mate-n-lok connectors (continued) amp soft shell pin and socket connectors commercial mate-n-lok connectors .200 [5.08] centerline standard density .153 [3.89] 1.000 [25.40] .484 [12.30] .120 [3.05] .330 [8.38] contact housing .300 [7.62] .375 [9.53] .375 [9.53] .300 [7.62] .100 [2.54] .100 [2.54] .350 [8.89] .075 [1.91] .100 [2.54] .100 [2.54] typ. .150 [3.8] min. .125 [3.18] 2 plcs. 1234 see note dia. dia. 6, 9, 12 and 15 circuit, matrix recommended pc board hole layout .062 [1.57] thick pc board number of a part numbers mates with finish pin housing circuits dim. standard tail 5 long tail 6 part number 1.000 770997-1 3 4 pre-tin 794285-1 3,7 1-480426-0 2,3 25.40 794287-1 3,4,8 6 .720 pre-tin 350641-1 350576-1 1-480276-0 18.29 duplex 1 1586539-2 9 .960 pre-tin 350642-1 350577-1 1-480277-0 24.39 12 1.200 pre-tin 350643-1 350578-1 1-480278-0 30.49 15 1.440 pre-tin 350644-1 350579-1 1-480324-0 36.58 1 duplex finish plated with .000030 [.000762] min. gold in mating area, matte tin on solder tail end over .000050 [.00127] min. nickel underplate on entire contact. 2 other mating connectors include vertical, right-angle and surface mount pc board pin headers. 3 used by the disk drive industry. 4 surface mount compatible. 5 use standard tail for .062 [1.57] thick pc board. 6 use long tail for .125 [3.18] thick pc board. 7 low mating force 8 high temperature note: all part numbers are rohs compliant. 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 .645 [16.38] .470 [11.94] typ. dia. typ. .240 [6.09] .202 [5.13] .070 [1.78] related product data product specifications 108-1077 commercial mate-n-lok pc board headers performance characteristics pages 151-152 technical documents pages 151 and 205-206 mating pin housings pages 157-160 mating pin headers pages 161-164 mating socket housings pages 157-160 mating socket headers page 162 mating idc page 163 pc board surface mount right-angle pin header material and finish housing nylon, black color flammability rating ul94v-2 contact phosphor bronze, pre-tin solder tail width .052 [1.32] a 4 circuit, in-line .200 [5.08] 4 circuit, in-line pc board vertical socket headers material housing nylon, natural color flammability rating ul94v-2 contacts phosphor bronze solder tail diameter .062 [1.57] recommended pc board hole layout .062 [1.57] thick pc board 1 2 3 4 a .245 [6.22] .200 [5.08] typ. .824 [2093] .440 [11.18] .015 [0.38] .170 [4.32] .070 [1.78] dia. typ. typ. note: .010 [.25] min. thick solder paste, 63/27 tin recommended pc board layout .062 [1.57] thick pc board part number 770829-1 notes: 1. mating parts include socket housings, a vertical pc board socket header below and the insulation displacement connectors (idc). 2 . used by the disk drive industry.
163 catalog 82181 dimensions are in inches and dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 4-08 millimeters unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 commercial mate-n-lok connectors (continued) amp soft shell pin and socket connectors commercial mate-n-lok connectors .200 [5.08] centerline standard density .505 [12.82] dust covers material housing polyester, white color flammability rating ul94v-2 pc board right-angle pin headers material and finish contact phosphor bronze, pre-tin solder tail width .052 [1.32] for feed-to wiring part number 770232-1 4 circuit, in-line for feed-through wiring part number 770233-1 wire size range color finish part number mates with awg [mm 2 ] code ul94v-2 ul94v-0 part numbers 22 red pre-tin 770156-2 794036-3 1-480426-0** [.3] 350211-1 20 yellow pre-tin 770156-4 794036-2 350211-2 [.5] 350424-1 18 orange pre-tin 770156-3 794036-1 350424-2 [.8] 641737-1 16 1-641737-1 770827-1 [1.2] blue pre-tin 770156-5* 794036-4 770829-1 770846-1 *application tooling: arbor tool 91085-2 uses head 231920-2. **pin housing notes: 1. insulation diameter .095 [2.41] max. 2. application tooling power unit no. 91112-2 (is 408-7763) uses head no. 231920-2 (is 408-9330) and hand tool handle no. 58074-1 (is 408-6790) uses terminating head no. 231894-1 (is 408-3186) note: all part numbers are rohs compliant. .994 [25.24] .325 [8.25] max. .142 [3.60] max. max. .390 [9.90] .200 [5.08] .830 [21.08] max. .643 [16.33] max. .760 [19.30 ] .760 [19.30 ] insulation displacement connectors (idc) material housing nylon contact phosphor bronze related product data used by the disk drive industry. product specifications 108-1077 commercial mate-n-lok pc board headers 108-49000 idc connectors application specification 114-49001 idc connectors performance characteristics pages 151-152 technical documents pages 151 and 205-206 mating socket housings pages 157-160 mating pin housings pages 157- 160 mating pin headers pages 161-164 recommended pc board hole layout .062 [1.57] thick pc board number of dimensions part mates with housing material socket housing circuits a bcd numbers part number 2 .600 .300 ul94v-2 nylon 794120-1 1-480318-0 15.24 7.62 natural color 3 .800 .150 .300 .600 ul94v-0 nylon 643488-1 1-480303-0 20.32 3.81 7.62 15.24 4 ul94v-2 nylon, 641737-1 3 1-480424-0 2,3 1.000 .200 .400 .800 natural color 770846-1 1,3 25.40 5.08 10.16 20.32 ul94v-0 nylon 1-641737-1 3 770827-1 2,3 1 surface mount compatible. 2 other mating connectors include a vertical pc board socket header and the insulation displacement connectors (idc). 3 used by the disk drive industry. .345 [.876] .400 [10.16] .100 [2.54] .100 [2.54] .484 [12.29] .140 [3.55] typ. dia. dia. dia. .200 [5.08] typ. a d b c .060 [1.524 ] (4 plcs.) .100 [2.54 ] (2 plcs.) .157 [3.98 ] (2 plcs.) note: these parts are used with the insulation displacement connectors below. .142 [3.60] max. max. .505 [12.82] 2, 3, and 4 circuit, in-line 2, 3, and 4 circuit .300 [7.62] .157 [3.99] 2 plc. .060 [1.52] 2 plc. .100 [2.54] 2 plc. .100 [2.54] .200 [5.08] .150 [3.81] dia. socket assembly (plug)
164 catalog 82181 dimensions are in inches and dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 4-08 millimeters unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 commercial mate-n-lok connectors (continued) amp soft shell pin and socket connectors commercial mate-n-lok connectors .200 [5.08] centerline standard density pc board right-angle pin header with fix belt material housing thermoplastic flammability rating ul94v-2 contacts copper alloy related product data used by the disk drive industry product specification 108-5155 .996 [25.30] .217 [5.50] .933 [23.70] .600 [15.24] .400 [10.16] .167 [4.23] .200 [5.08] .402 [10.20] .453 [11.50] .161 [4.10] .150 [3.80] .346 [8.80] .016 [.400] ref. 432 1 part no. 174552-1 notes: mates with socket housing part no. 1-480424-0. other mating connectors include a vertical pc board socket header and the insulation displacement connectors (idc). .933 [23.70] .209 [5.30] .215 [5.45] .600 [15.24] .400 [10.15] .167 [4.23] .200 [5.08] .091 [2.30] .059 [1.50] recommended pc board hole layout .062 [1.57] thick pc board 4 circuit, in-line pc board right-angle pin headers with fix belt reverse polarization material and finish housing nylon flammability rating ul94v-2 contacts tin plated, copper alloy related product data used by the disk drive industry product specification 108-5155 .996 [25.30] .217 [5.50] ref. .933 [23.70] .600 [15.24] .400 [10.16] .167 [4.23] .933 [23.70] .200 [5.08] .600 [15.24] .167 [4.23] .200 [5.08] .400 [10.16] .090 [2.30] 2 plcs. .059 [1.50] 4 plcs. .215 [5.45] .209 [5.30] .402 [10.20] .453 [11.50] .161 [4.10] .512 [13.00] .362 [9.20] .346 [8.80] .016 [.400] ref. a ref.* 432 1 part no. 174804* recommended pc board hole layout .062 [1.57] thick pc board notes: mates with socket housing part no. 1-480424-0. other mating connectors include a vertical pc board socket header and the insulation displacement connectors (idc). part no. a dim.* description 174804-1 .150 long clamp 3.80 with kink 4 circuit, in-line note: all part numbers are rohs compliant.
165 catalog 82181 dimensions are in inches and dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 4-08 millimeters unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 .140 mate-n-lok connectors (large insulation), .240 centerline amp soft shell pin and socket connectors standard density .140 mate-n-lok connectors (large insulation) .240 [6.10] centerline maximum current maximum cur- rent rating of .140 mate-n-lok connectors is limited by the maximum operating temperature of the housings which is 105c and the temperature rise of the contacts which is 30c. there are several variables which have a direct effect on this maximum current-carrying capability for a given connector and must be considered for each application. these variables are: wire size larger diameter wire will carry more current since it has less inter- nal resistance to current flow and thus generates less heat. longer wire lengths also enhance current-carrying capabili- ties since the wire conducts heat away from the connector. connector size in general, the more circuits in a connector, the less current can be carried. ambient temperature the higher the ambient temperature, the less current can be carried in any given connector. technical documents product specification 108-1032 .140 diameter mate-n-lok connectors application specification 114-1007 .140 diameter mate-n-lok contacts termination contact resistance crimp wire size test resistance tensile force awg mm 2 current milliohms force (min.) (amps) (max. init.) lbs. n 20 .5 4.5 3.0 20 89 18 .8 6 2.5 30 133 16 1.2 8 2.5 45 200 14 2.0 10 2.0 50 222 12 3.0 12 1.5 60 267 10 5.0 14 1.5 65 289 note: this is the total resistance between wire crimps of a mated pin and socket. product facts available in 2, 3 and 9 circuit configurations for panel mounting; 4 and 9 circuit configurations for free-hanging applications standard natural nylon housings housings fully polarized contacts fully protected in housings contacts accept wire size range 20-10 awg [.5-5.0 mm 2 ] with insulation diameters from .100 [2.54] to .180 [4.57] low insertion/extraction forces dual locking lances provide optimum contact stability extraction tool removes both pins and sockets contacts are on .240 [6.09] centerline spacing not for interrupting current recognized under the component program of underwriters laboratories inc., file no. e28476 certified by canadian standards association, file no. lr 7189a performance characteristics the .140 mate-n-lok connector per- formance characteristics found on this page are based on free-hanging and panel mount connectors, loaded with contacts crimped on stranded wire. dielectric withstand voltage 3.0 kvac between adjacent circuits insulation resistance 1000 megohms minimum initial between adjacent circuits voltage rating 600 v ac or dc connector mating 4.5 lb. max. per circuit connector unmating .8 lb. min. per circuit contact retention 30 lb. min. durability 25 cycles, mating and unmating thermal shock -55c to +85c temperature-humidity cycling 25c to 65c at 95 rh current rating verification for 30c maximum temperature rise 100% energized wire-to-wire .140 mate-n-lok connector calculated current table number of wire awg circuits 10 12 14 16 18 20 2 28.00 23.00 18.50 15.00 13.50 10.50 3 25.00 21.00 17.00 13.50 12.00 9.50 9 18.50 15.00 12.00 10.00 9.00 7.00 values are based on initial temperature rise versus current testing and are intended to be a guide in the selection of a connector family. all applications should be tested by the end user. the values listed are per circuit for fully loaded housings being 100% energized. note: all combinations were not tested, and this chart contains interpolated and extrapolated values. minimum wire lengths for t-rise vs. current testing note: if wire lengths used are less than those listed, the current carrying ability of the system will be reduced due to less heat being conducted away from the connector. the customer should fully test all applications. r r
166 catalog 82181 dimensions are in inches and dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 4-08 millimeters unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 .140 mate-n-lok connectors (large insulation), .240 centerline (continued) amp soft shell pin and socket connectors .140 mate-n-lok connectors (large insulation) .240 [6.10] centerline standard density socket housing (plug) part no. 1-480585-0 socket housing (plug) part no. 1-480510-0 pin housing (cap) part no. 1-480586-0 pin housing (cap) part no. 1-480512-0 part no. 794700-1 (black color high temp.) contacts pin diameter .140 [3.57] stock thickness .014 [.357] related product data product specification 108-1032 .140 diameter mate-n-lok connectors application specification 114-1007 .140 diameter mate-n-lok contacts performance characteristics page 159 keying plug none housings pages 166-167 technical documents pages 165 and 205-206 application tooling pages 207-210 housings free-hanging .240 [6.09] centerline spacing material nylon, natural color flammability rating ul94v-2 cavity identification (rear view) pin cap cap plug plug socket 9 circuit, matrix 4 circuit wire size ins. dia. contact part numbers hdm hand tool range range material & finish pin socket applicator part no. awg [mm 2 ] strip form loose piece strip form loose piece part no. 20-14 .100-.180 brass. pre-tin 61627-1 350389-1 61626-1 350388-1 567306-1 567306-2 90247-1 [.5-2.0] 2.54-4.5 phos. brz., pre-tin 61627-2 61626-2 567306-3 14-10 .100-.180 brass. pre-tin 350201-1 350391-1 350200-1 350390-1 567309-1 567309-2 69710-1 2 [2.0-5.0] 2.54-4.5 phos. brz., pre-tin 350201-2 350391-2 350200-2 350390-2 567309-3 1 hdm applicator part number ending in -1 is used on ampomator cls machine with t or g terminators, -2 is used on amp-o-lectric model k machine, -3 is used on amp-o-lectric model g machine. see pages 207-210 for further information. 2 hand tool no. 69710-1 uses die set no. 58374-1 for 14-12 awg and no. 58373-1 for 10 awg. .995 [25.27] 1.130 [28.70] 1.065 [27.05] .865 [21.97] 1.130 [28.70] .755 [19.17] .755 [19.17] .755 [19.17] .845 [21.46] .845 [21.46] .240 [6.09] .240 [6.09] .240 [6.09] .240 [6.09] 1.180 [29.97] .775 [19.68] .580 [14.73] .950 [24.13] .950 [24.13] 1.350 [34.29] .565 [14.35] .795 [20.19] note: all part numbers are rohs compliant. contact extraction tool part no. 318845-1 is 408-4378
167 catalog 82181 dimensions are in inches and dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 4-08 millimeters unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 .140 mate-n-lok connectors (large insulation), .240 centerline (continued) amp soft shell pin and socket connectors standard density .140 mate-n-lok connectors (large insulation) .240 [6.10] centerline housings panel mount .240 [6.09] centerline spacing material housing nylon, natural color flammability rating ul94v-2 cavity identification (rear view) socket housing (plug) part no. 1-480672-0 part no. 1586305-1 (black color high temp.) pin housing (cap) part no. 1-480673-0 part no. 794683-1 (black color high temp.) plug plug plug cap cap cap related product data product specification 108-1032 .140 diameter mate-n-lok connectors application specification 114-1007 .140 diameter mate-n-lok contacts performance characteristics page 165 keying plug none contacts page 166 technical documents pages 165 and 205-206 notes: 1. panel thickness .040-.070 [1.02-1.78]. 2. "x" and "y" dimensions must be within .005 [.127] of each other. 3. panel should be punched so that the housing enters the panel in the same direction as the punch for ease of assembly. 1 2 circuit-.725 [18.42] 3 circuit- .965 [24.51] 2 .050 x .050 [1.27-1.27] tabs in corners of outlet are optional to reduce housing float in panel. .515 [13.08] .950 [24.13] .950 [24.13] .950 [24.13] .950 [24.13] .910 [23.11] .755 [19.17] .755 [19.17] .765 [19.43] .765 [19.43] .755 [19.17] .755 [19.17] .815 [20.70] .275 [6.98] .275 [6.98] 1.055 [26.79] 1.205 [26.79] .240 [6.09] .240 [6.09] .240 [6.09] .240 [6.09] .288 [7.31] .050 2 [1.27] .050 2 [1.27] 1.025 [26.03] 1.025 [26.03] .475 [12.06] .910 [23.11] .190 [4.82] .190 [4.82] .240 [6.09] .240 [6.09] .965 [24.51] .365 [9.27] .365 [9.27] 1.130 [28.70] 1.130 [28.70] 1.130 [28.70] .515 [13.08] c 1 x x y recommended panel cutouts view is from housing entry side 9 circuit, matrix 2 and 3 circuit 9 circuit note: all part numbers are rohs compliant. socket housing (plug) part no. 1-350344-0 part no. 794699-1 (black color high temp.) pin housing (cap) part no. 1-350345-0 part no. 1586305-1 (black color high temp.) 2 and 3 circuit, in-line socket housing (plug) part no. 1-350346-0 pin housing (cap) part no. 1-350347-0 part no. 794061-1 (black color high temp.)
168 catalog 82181 dimensions are in inches and dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 4-08 millimeters unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 engineering notes amp soft shell pin and socket connectors
169 catalog 82181 dimensions are in inches and dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 4-08 millimeters unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 universal mate-n-lok connectors amp soft shell pin and socket connectors universal mate-n-lok connectors .250 [6.35] centerline standard density performance characteristics the universal mate-n-lok connector performance characteristics found on pages 169-170 are based on free-hanging and panel mount connectors, loaded with contacts crimped on stranded wire. dielectric withstanding voltage 5.0 kvac or 5.0 kvdc between adjacent circuits insulation resistance 1000 megohms minimum initial between adjacent circuits voltage rating 600 v ac or dc contact insertion force 5.0 lb. max. per contact contact retention 15 lb. min. per contact durability 50 cycles, mating and unmating product facts pins and sockets can be intermixed in the same housing positive polarization rear cavity identification contacts completely enclosed in housings positive locking housings insulation capability to .200 [5.08] diameter removable, crimp snap-in contacts low contact mating force contacts accept 30-10 awg [.05-5.0 mm 2 ] wire sizes contacts available with pre- tin or gold plating dual locking lances provide optimum contact stability panel mount or free-hanging mate with universal mate-n-lok ii housings available in ul 94v-o flame retardant material. meets the material requirements of table 25.1 of u.l. standard 1410 (television receivers and video products) not for interrupting current harness to pc board capa- bility using pin or socket headers pin and socket headers are available in both vertical and right-angle style solderability headers meet mil-std 202 method 208 contacts are on .250 [6.35] centerline spacing recognized under the component program of underwriters laboratories inc., file no. e28476 certified by canadian standards association, file no. lr 7189 passed test by vde under their registration number 3980/continuous surveillance r r technical documents product specifications 108-1031 universal mate-n-lok connectors 108-1053 universal mate-n-lok pc board headers application specification 114-1010 universal mate-n-lok contacts instruction sheet 408-7714 plug, cap, headers, pin, socket and accessories
170 catalog 82181 dimensions are in inches and dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 4-08 millimeters unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 universal mate-n-lok connectors (continued) amp soft shell pin and socket connectors universal mate-n-lok connectors .250 [6.35] centerline standard density performance characteristics (continued) maximum current maximum cur- rent rating of universal mate-n-lok connectors is limited by the maximum operating temperature of the housings which is 125c for 94v-2 housings and 120c for 94v-0 housings including the temperature rise of the contacts which is a maximum of 30c. there are several variables which have a direct effect on this maximum current-carrying capabil- ity for a given connector and must be considered for each application. these variables are: wire size larger diameter wire will carry more current since it has less internal resistance to current flow and thus generates less heat. longer wire lengths also enhance current carrying capabilities since the wire conducts heat away from the connector. connector size in general, the more circuits in a connector, the less current can be carried. ambient temperature the higher the ambient temperature, the less current can be carried in any given connector. printed wiring board conductor size the finished trace conductor width and thickness should be maxi- mized to allow for the greatest current carrying capacity and heat dissipation. universal mate-n-lok connectors also will withstand the following tests: vibration 10-55-10 cycles per minute at .06 inch total excursion physical shock 18 drops, 50 g sawtooth at 10 milliseconds housing panel retention 75 lb. min. housing lock strength 30 lb. min. thermal shock -55c to +85c temperature-humidity cycling 25c to 65c at 95 rh corrosion 48 hr. at 5% salt concentration related product data product specifications 108-1031 universal mate-n-lok connectors 108-1053 universal mate-n-lok headers current rating verification for 30c maximum temperature rise 100% energized wire-to-wire calculated current table number of wire gauge circuits 10 12 14 16 18 20 22 24 26 30 2 19.00 18.00 17.00 14.50 13.00 10.00 8.00 6.50 5.50 3.50 3 17.50 16.50 15.50 13.00 12.00 9.00 7.50 6.00 5.00 3.00 4 16.50 15.50 15.00 12.50 11.00 8.50 7.00 5.50 4.50 3.00 5 16.00 15.00 14.00 12.00 10.50 8.00 6.50 5.50 4.50 3.00 6 in-line 15.50 14.50 13.50 11.50 10.00 8.00 6.50 5.00 4.00 2.50 6 matrix 15.00 14.00 13.00 11.00 9.50 7.50 6.00 5.00 4.00 2.50 8 14.50 14.00 13.00 10.50 9.50 7.50 6.00 5.00 4.00 2.50 9 13.50 12.50 11.50 9.50 8.50 6.50 5.50 4.50 3.50 2.00 10 14.00 13.00 12.50 10.00 9.00 7.00 5.50 4.50 3.50 2.50 12 12.50 12.00 11.00 9.00 8.00 6.00 5.00 4.00 3.00 2.00 15 12.00 11.50 10.00 8.50 7.50 6.00 4.50 4.00 3.00 2.00 values are based on initial temperature rise versus current testing and are intended to be a guide in the selection of a connector family. all applications should be tested by the end user. the values listed are per circuit for fully loaded housings being 100% energized. note: all combinations were not tested, and this chart contains interpolated and extrapolated values. minimum wire lengths for t-rise vs. current testing awg min. length (in.) awg min. length (in.) 30 2.6 18 9.4 28 3.2 16 11.3 26 4.1 14 13.7 24 5.1 12 16.4 20 7.8 10 19.3 note: if wire lengths used are less than those listed above, the current carrying ability of the system will be reduced due to less heat being conducted away from the connector. the customer should fully test all applications. termination contact resistance crimp wire size test resistance tensile force awg mm 2 current milliohms force (min.) (amps) (max. init.) lbs. n 30 .05 2 9 28 .08 3 13 26 .12 6 27 24 .2 1.5 3.50 8 36 22 .3 3 3.50 14 62 20 .5 4.5 3.00 14 62 18 .8 6 3.00 30 133 16 1.2 8 2.75 45 200 14 2.0 10 2.75 50 222 12 3.0 60 267 10 5.0 70 311 note: this is the total resistance between wire crimps of a mated pin and socket. wire-to-board due to the vast differences in trace geometry and printed circuit board configurations, we are unable to provide a separate current carrying chart for our printed circuit board header products. however, the above wire-to-wire charts may be used as a guideline for headers if the trace width and thickness is equal to the listed wire gauge. for vertical headers, only 95% of the wire-to-wire value should be used. for right-angle headers, only 75% of the wire-to-wire value should be used. the chart values are only a tool for connector selection and will require the customer to fully test their application. termination resistance/contact crimp tensile force
171 catalog 82181 dimensions are in inches and dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 4-08 millimeters unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 universal mate-n-lok connectors (continued) amp soft shell pin and socket connectors universal mate-n-lok connectors .250 [6.35] centerline standard density universal mate-n-lok connector mating combinations connector part number 7 mating connector part number pc board headers 7 number flammability plug cap vertical pin 2 vertical socket 2 right-angle 2 of style part part plating standard standard long standard standard long circuits rating number 2 number 2 tail tail pin socket tail polarized tail tail polarized tail 1 ul94v-2 1-350867-0 770421-1 ul94v-0 350865-1 350866-1 ul94v-2 in-line 1-480698-0 1-480699-0 pre-tin 350428-1 641963-1 350582-1 350759-4 643411-1 350986-4 794814-1 3 794815-1 3 duplex 1 350428-4 641963-3 350582-4 350759-5 2 pre-tin 350786-1 641964-1 350787-1 350824-1 643412-1 350831-1 1-350942-0 643226-1 ul94v-0 in-line 350777-1 350778-1 1-641964-1 5 duplex 1 350786-3 641964-3 350787-3 350824-4 643412-3 3-350942-0 ul94v-2 in-line 6 1-480700-0 1-480701-0 pre-tin 350429-1 641965-1 350583-1 350760-4 643413-1 350987-4 794901-1 3 794900-1 3 duplex 1 350429-4 350583-4 350760-5 3 pre-tin 350789-1 641966-1 350790-1 350825-1 643414-1 350832-1 1-350943-0 643228-1 ul94v-0 in-line 350766-1 350767-1 1-641966-1 4 duplex 1 350789-3 350790-3 350825-4 643414-3 350832-4 3-350943-0 3-643228-0 ul94v-2 in-line 1-480702-0 1-480703-0 pre-tin 350430-1 641967-1 350584-1 350761-4 643415-1 350988-4 1-350948-0 4 794899-1 3 794707-1 3 duplex 1 350430-4 350584-4 350761-5 350988-5 ul94v-0 in-line 350779-1 350780-1 pre-tin 350792-1 641968-1 350793-1 350826-1 643416-1 350833-1 1-350944-0 643230-1 duplex 1 350792-3 350793-3 350826-4 350833-4 3-350944-0 3-643230-0 ul94v-2 in-line 1-480763-0 1-480764-0 3 pre-tin 640466-1 643405-1 640467-1 1-350949-0 5 794863-1 3 duplex 1 640466-3 640467-3 ul94v-0 in-line 350809-1 350810-1 pre-tin 640900-1 643406-1 640901-1 1-350945-0 643232-1 duplex 1 640900-3 640901-3 3-350945-0 3-643232-0 ul94v-2 in-line 640585-1 926307-1 pre-tin 641832-1 643407-1 640587-1 duplex 1 641832-3 ul94v-0 in-line 640581-1 926307-3 pre-tin 641831-1 643408-1 770262-1 640583-1 643234-1 6 duplex 1 641831-3 770262-3 640583-3 3-643234-0 1-480704-0 1-480705-0 pre-tin 350431-1 641969-1 350585-1 350762-4 643423-1 350989-4 ul94v-2 matrix 6 794535-1 3 794096-1 5 794536-1 3 duplex 1 350431-4 350585-4 350762-5 350989-5 ul94v-0 matrix 350715-1 350781-1 pre-tin 350711-1 641970-1 350732-1 350827-1 643424-1 350834-1 duplex 1 350711-4 641970-3 350732-4 350827-4 643424-3 350834-4 ul94v-2 in-line 640586-1 926308-1 pre-tin 641825-1 770143-1 8 duplex 1 ul94v-0 in-line 640582-1 926308-3 pre-tin 641828-1 643410-1 640584-1 643236-1 duplex 1 643410-3 640584-3 3-643236-0 ul94v-2 matrix 1-480706-0 1-480707-0 pre-tin 350432-1 641971-1 350586-1 350763-4 643425-1 350990-4 794537-1 3 794538-1 3 duplex 1 350432-4 641971-3 350586-4 350763-5 350990-5 9 pre-tin 350712-1 641972-1 350742-1 350828-1 643426-1 350835-1 ul94v-0 matrix 350720-1 350782-1 1-641972-1 4 duplex 1 350712-4 641972-3 350742-4 350828-4 643426-3 350835-4 ul94v-2 in-line 926302-1 926309-1 pre-tin 10 duplex 1 ul94v-0 in-line 926302-3 926309-3 pre-tin duplex 1 ul94v-2 matrix 1-480708-0 1-480709-0 pre-tin 350433-1 641973-1 350587-1 350764-4 350991-4 794851-1 3 794727-1 3 duplex 1 350433-4 350587-4 350764-5 350991-5 12 pre-tin 350713-1 641974-1 350737-1 350829-1 643428-1 350836-1 ul94v-0 matrix 350735-1 350783-1 1-641974-1 4 duplex 1 350713-4 641974-3 350737-4 350829-4 350836-4 ul94v-2 6 matrix 1-480710-0 1-480711-0 pre-tin 350434-1 641975-1 350588-1 350765-4 643429-1 350992-4 15 794546-1 3 794545-1 3 duplex 1 350434-4 350588-4 350765-5 ul94v-0 matrix 350736-1 350784-1 pre-tin 350714-1 641976-1 350738-1 350830-1 643430-1 350837-1 duplex 1 350714-4 641976-4 350738-4 350830-4 350837-4 note: all part numbers are rohs compliant. 1 duplex finish plated with .000030 [.000762] min. gold in mating area, matte tin on solder tail end over .000050 [.00127] min. nickel underplate on entire contact. 2 universal mate-n-lok plug and cap housings accept pin or socket con- tacts. use the appropriate contacts in the plug housing as required by the mating component. 3 housing material has 125c temperature rating. 4 black in color. 5 tool removable 6 uv resistant housing material available. 7 european glow wire housing material available.
172 catalog 82181 dimensions are in inches and dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 4-08 millimeters unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 universal mate-n-lok connectors (continued) amp soft shell pin and socket connectors universal mate-n-lok connectors .250 [6.35] centerline standard density contacts solid pin diameter .084 [2.13] stock thickness .012 [.305] unless otherwise noted. these contacts can be used in either universal mate-n-lok plug or cap housings only. wire size ins. dia. l dim. contact part numbers hdm hand tool range range pin socket material & finish pin socket applicator part no. awg [mm 2 ] strip form loose piece strip form loose piece part no. 30-26 .032-.057 .790 .760 brass, pre-tin 350924-1 770672-1 350925-1 770673-1 466616-2 6 58439-1 [.05-.12] .813-1.45 20.06 19.30 phos. brz., gold 2 350924-6 770672-6 350925-6 466616-3 6 brass, pre-tin 350561-1 350690-1 350851-1 350689-1 1 350570-1 1 brass, gold 2 350561-2 350690-2 350851-2 640347-2 466320-1 6 24-18 .040-.100 .790 .760 350570-2 1 350689-2 1 466320-2 6 91510-1 [.2-.8] 1.02-2.54 20.06 19.30 brass, select gold 3 350561-7 350690-7 350851-7 350689-7 1 466320-4 6 350570-7 1 phos. brz., pre-tin 350561-3 350690-3 350570-3 1 350689-3 1 phos. brz., select gold 3 350570-6 1 brass, pre-tin 350218-1 350547-1 350536-1 350550-1 20-14 .060-.130 .790 .760 brass, gold 2 350218-2 350547-2 350536-2 350550-2 687763-1 6 [.5-2.0] 1.52-3.30 20.06 19.30 brass, select gold 3 350218-7 350547-7 350536-7 350550-7 687763-2 6 91500-1 phos. brz., pre-tin 350218-3 350547-3 350536-3 350550-3 687763-6 6 phos. brz., select gold 3 350218-6 350547-6 350536-6 350550-6 20-14 brass, pre-tin 350538-1 350552-1 350537-1 350551-1 [.5-2.0] .130-.200 .810 .780 brass, gold 2 350538-2 350552-2 350537-2 350551-2 687926-1 6 91508-1 7 or 3.30-5.08 20.57 19.81 brass, select gold 3 350538-7 350552-7 350537-7 350551-7 687926-2 6 91506-1 7 2@18 phos. brz., pre-tin 350538-3 350552-3 350537-3 350551-3 687926-6 6 [.8] phos. brz., select gold 3 350538-6 350552-6 350537-6 350551-6 18-14 4 .130-.200 .810 .780 brass, pre-tin 350873-1 350874-1 466588-1 6 91508-1 7 466588-2 6 [.8-2.0] 3.30-5.08 20.57 19.81 phos. brz., pre-tin 350873-3 350918-3 350874-3 350919-3 466588-3 6 91506-1 7 12-10 .200 max. 5 .810 .780 phos. brz., pre-tin 350922-3 640309-3 350923-3 640310-3 466597-1 6 [3.0-5.0] 5.08 20.57 19.81 phos. brz., select gold 3 350922-6 640309-6 350923-6 640310-6 466597-2 6 69710-1 7 466597-3 6 1 socket contact .010 [.254] stock thickness 2 gold finish plated with .000030 [.000762] min. gold in mating area and inside wire barrel over .000050 [.00127] min. nickel underplate on entire contact. 3 select gold finish plated with .000030 [.000762] min. gold in mating area over .000050 [.00127] min. nickel underplate on entire contact. 4 recommended for predominant use of 14 awg wire. 5 there is no insulation barrel on this contact. insulation maximum diameter is limited by the housing. 6 hdm applicator part number ending in -1 is used on ampomator cls machine with t or g terminators, -2 is used on amp-o-lectric model k machine, -3, -4 & -6 are used on amp-o-lectric model g machine. see pages 207-210 for further information. 7 hand tool no. 91508-1 is for wire size 20-18 awg. hand tool no. 91506-1 is for wire size 16-14 awg. hand tool no. 69710-1 use die set no. 58380-1 for 12 awg and no. 58380-2 for 10 awg. note: phosphor bronze material contacts should be used in high temperature/humidity cycling applications. note: all part numbers are rohs compliant. related product data product specification 108-1031 universal mate-n-lok connectors application specification 114-1010 universal mate-n-lok contacts performance characteristics pages 169-170 technical documents pages 169 and 205-206 application tooling pages 207-210 housings page 174 contact insertion tool (for inserting contacts applied to small diameter wire) part no. 91002-1 is 408-7347 solid pin socket contact extraction tool part no. 318851-1 is 408-4371 contact retention test tool part no. 1586701-1 is 408-10003
173 catalog 82181 dimensions are in inches and dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 4-08 millimeters unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 universal mate-n-lok connectors (continued) amp soft shell pin and socket connectors universal mate-n-lok connectors .250 [6.35] centerline standard density contacts split pin diameter .086 [2.18] stock thickness .012 [.305] these contacts can be used in either universal mate-n-lok plug or cap housings only. related product data product specification 108-1031 universal mate-n-lok connectors application specification 1 14-1010 universal mate-n-lok contacts performance characteristics pages 169-170 technical documents pages 169 and 205-206 application tooling pages 207-210 housings page 174 split pins wire size range ins. dia. l contact part number hdm hand tool awg [mm 2 ] range dim. material & finish applicator part no. strip form loose piece part no. 24-18 .040-.100 .790 brass, pre-tin 350699-1 350706-1 466320-1 3 [.2-.8] 1.02-2.54 20.06 brass, gold 1 350699-2 350706-2 466320-2 3 91510-1 brass, select gold 2 350699-7 350706-7 466320-4 3 20-14 .060-.130 .790 brass, pre-tin 350687-1 350705-1 687763-1 3 [.5-2.0] 1.52-3.30 20.06 brass, gold 1 350687-2 350705-2 687763-2 3 91500-1 brass, select gold 2 350687-7 350705-7 687763-6 3 .130-.200 .810 brass, pre-tin 350700-1 350707-1 687926-1 3 91508-1 4 3.30-5.08 20.57 brass, gold 1 350700-2 350707-2 687926-2 3 91506-1 4 brass, select gold 2 350700-7 350707-7 687926-6 3 1 gold finish plated with .000030 [.000762] min. gold in mating area and inside wire barrel over .000050 [.00127] min. nickel underplate on entire contact. 2 select gold finish plated with .000030 [.000762] min. gold in mating area over .000050 [.00127] min. nickel underplate on entire contact. 3 hdm applicator part number ending in -1, is used on ampomator cls machine with t or g terminators, -2 is used on amp-o-lectric model k machine, -4 & -6 are used on amp-o-lectric model g machine. see pages 207-210 for further information. 4 hand tool no. 91508-1 for wire size 20-18 awg. hand tool no. 91506-1 for wire size 16-14 awg. notes: 1. split pins recommended for use in housings having 6, 9, 12 and 15 circuits to reduce mating force. 2. phosphor bronze material contacts are available for use in high temperature/humidity cycling applications, consult tyco electronics. note: this contact will accept a 110 series faston receptacle part no. 350871-1 (strip form) allowing simple field wiring or wiring changes. grounding pins (.1 00 [2.54] longer than standard pin) (mate first, break last, not for interrupting current) wire size range ins. dia. l contact part number hdm hand tool awg [mm 2 ] range dim. material & finish applicator part no. strip form loose piece part no. 24-18 .060-.130 .890 brass, pre-tin 770210-1 567216-2 2 [.2-.8] 1.52-3.30 22.60 567216-3 2 20-14 .060-.130 .890 687763-1 2 brass, pre-tin 350654-1 350669-1 687763-2 2 91500-1 [.5-2.0] 1.52-3.30 22.60 687763-6 2 466597-1 2 12-10 .200 max. 1 .910 phos. brz., pre-tin 770234-3 466597-2 2 [3.0-5.0] 5.08 23.11 466597-3 2 1 there is no insulation barrel on this contact. insulation maximum diameter is limited by the housing. 2 hdm applicator part number ending in -1 is used on ampomator cls machine with t or g terminators, -2 is used on amp-o-lectric model k machine, -3 & -6 are used on amp-o-lectric model g machine. see pages 207-210 for further information. programmable connector contact (socket with 110 series special faston tab) material and finish brass, pre-tin .805 [20.45] .048 [1.22] dia. part number 350877-1 20-14 [.5-2.0] or 2@18 [.8] note: all part numbers are rohs compliant.
174 catalog 82181 dimensions are in inches and dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 4-08 millimeters unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 universal mate-n-lok connectors (continued) amp soft shell pin and socket connectors universal mate-n-lok connectors .250 [6.35] centerline standard density housings free-hanging or panel mount .250 [6.35] centerline spacing 2, 3, 4, 5, 6, 8 and 10 circuit, in-line 6 circuit, matrix 9, 12 and 15 circuit, matrix number of a housing part numbers ul94v-2 nylon, natural color 2 ul94v-0 nylon 3 circuits dim. plug cap plug cap 1 1-350867-0 770421-1 350865-1 350866-1 2 .550 1-480698-0 1 1-480699-0 1 350777-1 1 350778-1 1 13.97 3 .800 1-480700-0 1 1-480701-0 1 350766-1 1 350767-1 1 20.32 4 1.050 1-480702-0 1 1-480703-0 1 350779-1 1 350780-1 1 26.67 5 1.300 1-480763-0 1 1-480764-0 1 350809-1 1 350810-1 1 33.02 1.550 640585-1 1 926307-1 1 640581-1 1 926307-3 1 39.37 6 1-480704-0 1-480705-0 350715-1 350781-1 794096-1 4 8 2.050 640586-1 1 926308-1 1 640582-1 1 926308-3 1 52.07 9 .800 1-480706-0 1-480707-0 350720-1 350782-1 20.32 10 2.550 926302-1 1 926309-1 1 926302-3 1 926309-3 1 64.77 12 1.050 1-480708-0 1-480709-0 350735-1 350783-1 26.67 15 1.300 1-480710-0 1-480711-0 350736-1 350784-1 33.02 1 in-line style. 2 housing material has 125c temperature rating. 3 housing material has 120c temperature rating. 4 tool removable. related product data product specification 108-1031 universal mate-n-lok connectors performance characteristics pages 169-170 contacts pages 172-173 panel cutout recommendations page 175 keying plug page 175 strain reliefs pages 175-176 technical documents pages 169 and 205-206 mating headers pages 182-183 and 185 other mating connectors universal mate-n-lok ii housings pages 193-194 note: see charts on page 182 to order plug and cap housings in colors . .580 [14.73] .300 [7.62] 1.080 [27.43] .460 [11.68] 1.080 [27.43] .300 [7.62] .620 [15.75] 1.080 [27.43] 1.080 [27.43] .550 [13.97] .550 [13.97] .460 [11.68] 1.080 [27.43] .800 [20.32] 1.120 [28.45] .290 [7.37] .290 [7.37] 1.080 [27.43] .460 [11.68] 1.080 [27.43] .380 [9.65] .380 [9.65] .800 [20.32] 1.080 [27.43] 1.080 [27.43] .460 [11.68] 1.080 [27.43] .800 [20.32] 1.120 [28.45] plug cap plug plug plug cap cap cap 1 circuit, free-hanging note: all part numbers are rohs compliant.
175 catalog 82181 dimensions are in inches and dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 4-08 millimeters unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 universal mate-n-lok connectors (continued) amp soft shell pin and socket connectors universal mate-n-lok connectors .250 [6.35] centerline standard density keying plugs is 408-3320 plug housing strain reliefs is 408-3320 related product data plug housings page 174 technical documents pages 169 and 205-206 number of dimensions style circuits abcde 2 .565 .340 .095 .530 .250 14.35 8.64 2.41 13.46 6.35 3 .815 .340 .095 .530 .250 20.70 8.64 2.41 13.46 6.35 4 1.065 .340 .095 .530 .250 27.05 8.64 2.41 13.46 6.35 in-line 5 1.315 .340 .095 .530 .250 33.40 8.64 2.41 13.46 6.35 6 1.567 .154 .189 .531 .394 39.80 3.91 4.80 13.49 10.0 8 2.067 .154 .189 .531 .394 52.50 3.91 4.80 13.49 10.0 10 2.567 .154 .189 .530 .394 65.20 3.91 4.80 13.46 10.0 6 .565 .480 .275 1.030 .250 14.35 12.19 6.99 26.16 6.35 9 .815 .480 .275 1.030 .250 matrix 20.70 12.19 6.99 26.16 6.35 12 1.065 .480 .275 1.030 .350 27.05 12.19 6.99 26.16 8.89 15 1.315 .480 .275 1.030 .350 33.40 12.19 6.99 26.16 8.89 part numbers ul94v-2 nylon material, natural color 1-350589-0 ul94v-0 nylon material 350811-1 2, 3, 4, 5, 6 and 8 circuit, in-line 6, 9, 12 and 15 circuit, matrix part numbers ul94v-2 nylon material, natural color 1-350590-0 ul94v-0 nylon material 350812-1 part numbers ul94v-2 nylon material, natural color 1-640415-1 ul94v-0 nylon material 1-640415-0 note: keying plug snaps into plug or cap housing recommended cap housing panel cutouts view is from cap entry side refer to application specification 114-1010 notes: 1. recommended panel thickness .030-.090 [.762-2.286]. panel must be punched so that housing enters panel in same direction as the punch. 2. optional do not remove this material when keying cap housing to panel. 3. circuit #1 location when using panel keying with 6, 9, 12 and 15 circuit matrix housings. 4. circuit #1 location when using panel keying with 2, 3, 4, 5, 6, 8 and 10 circuit in-line housings. 5. .175 [4.45] dimension is .125 [3.18] for 6, 8 and 10 circuit in-line housings. 1.375 [34.93] .530 [13.46] .600 [15.24] 2 reqd/assy. see note wire bundle dia. .312 [7.92] (2) #6x5 M 8 lg type b pan head sheet metal screws (not supplied) (2) #6x5 M 8 lg type b pan head sheet metal screws (not supplied) .530 [13.46] .600 [15.24] 1.375 [34.93] 2 reqd/assy. see note wire bundle dia. .500 [12.7] max. max. note: strain relief part number represents one half of a strain relief. two strain reliefs required per housing. note: all part numbers are rohs compliant.
176 catalog 82181 dimensions are in inches and dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 4-08 millimeters unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 universal mate-n-lok connectors (continued) amp soft shell pin and socket connectors universal mate-n-lok connectors .250 [6.35] centerline standard density plug or cap housing strain reliefs is 408-3320 related product data housings page 174 technical documents pages 169 and 205-206 number of a insert single wire wire bundle part numbers style circuits dim. supplied dia. range dia. range ul94v-2 nylon, ul94v-0 nylon natural color yes .040-.190 1-640719-0 640713-1 .960 1.02-4.83 2 24.38 no .200-.350 1-640719-1 640713-2 5.08-8.89 yes .040-.190 1-640720-0 640714-1 1.140 1.02-4.83 3 28.96 no .200-.350 641763-1 641945-1 5.08-8.89 yes .040-.190 641775-1 641776-1 1.325 1.02-4.83 in-line 4 33.65 no .200-.350 641775-2 641776-2 5.08-8.89 yes .040-.190 643030-3 643030-1 1.530 1.02-4.83 5 38.86 no .200-.350 643030-2 643030-4 5.08-8.89 yes .040-.190 643585-1 643313-1 1.780 1.02-4.83 6 45.21 no .200-.350 643585-2 643313-2 note 5 5.08-8.89 yes .040-.190 643314-1 2.280 1.02-4.83 8 56.08 no .200-.350 643314-2 note 5 5.08-8.89 6 1.030 yes .120-.650 1-640721-0 640715-1 26.16 3.05-16.51 9 1.030 yes .120-.650 1-640722-0 640716-1 26.16 3.05-16.51 matrix 12 1.280 yes .150-.750 1-640723-0 640717-1 32.51 3.81-19.05 15 1.530 yes .200-.850 1-640724-0 640718-1 38.86 5.08-21.59 notes: 1. cable clamping insert comes attached to strain relief. it can be used to provide additional adjustment for small wire bundles or discarded. 2. insert to be positioned as shown by dotted lines. 3. strain relief part number represents one-half of a strain relief. two strain reliefs required per housing. 4. must use cap housing adapters when attaching strain reliefs to a cap housing. two adapters required per housing. 5. strain reliefs for 6 and 8 circuit in-line fits plug housings only. cap housing adapters these adapters are designed to anchor the cap housing strain reliefs to the housings and prevent the strain relief halves from drawing in when the screws are being torqued down to clamp the cable. is 408-3320 2, 3, 4, 5, 6, 8, 9, 12 and 15 circuit (enclosed) for all positions except 2, 6 and 8 circuit cap housings for 2 in-line and 6 matrix circuit cap housings only ul94v-2 nylon material, natural color 641777-1 ul94v-0 nylon materia l 641778-1 ul94v-2 nylon material, natural color 643182-1 ul94v-0 nylon materia l 643182-2 1.300 [33.02] 1.300 [33.02] .480 [12.19] .630 [16.0] in-line matrix (2) #6x3/8 lg type b pan head sheet metal screws (not supplied) 2 reqd/assy. note 3 2 reqd/assy. note 3 insert 2 reqd/assy. note 3 note 2 note 2 note 1 .550 [13.97] .630 [16.0] (2) #6 x5/ 8 lg type b pan head sheet metal screws (not supplied) cap connector enclosed strain relief adapter note 4 note: all part numbers are rohs compliant.
177 catalog 82181 dimensions are in inches and dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 4-08 millimeters unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 universal mate-n-lok flanged cap housings with twist and lock feature amp soft shell pin and socket connectors universal mate-n-lok flanged cap housings .250 [6.35] centerline standard density product facts available in a 6, 9, and 12 circuit design designed for household appliances where a bulkhead connector system is needed in conjunction with foam-in insulation mates with standard universal mate-n-lok plug housings (page 174) accepts universal mate-n-lok pin and socket contacts (page 167) designed to utilize the splash proof/sealed universal mate-n-lok seals for additional sealing protection (pages 174-175) material and finish housing nylon, ul 94v-0 or ul 94v-2 rated contacts phosphor bronze or brass plating pre-tin or gold related product data contacts pages 172-173 plug housings page 174 seals page 180 .115 [2.92] 1.365 [34.67] .185 [4.69] 1.145 [29.08] 2.000 [50.80] .290 [7.36] .010 [0.25] 1.080 [27.43] .800 [20.32] .550 [13.97] .675 [17.15] 2 plc. .510 [12.95] notes: 1. recommended panel thickness: 0.76-2.29 [.030-.090] 2. panel must be punched so that the housing enters the panel in the same direction as the punch. 3. asymmetrical panel cutout pro- vides polarization for pin 1 loca- tion. recommended panel cutout (for 6 and 9 pos. housings) dia. dia. dia. radius number of cap housing part numbers circuits ul 94v-0 ul 94v-2 6 794760-1 794714-1 9 794761-1 794715-1 12 794762-1 794716-1 note: all part numbers are rohs compliant.
178 catalog 82181 dimensions are in inches and dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 4-08 millimeters unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 universal mate-n-lok connectors (continued) amp soft shell pin and socket connectors universal mate-n-lok sealed bulkhead connectors .250 [6.35] centerline standard density universal mate-n-lok sealed bulkhead connectors product facts bulkhead mount universal mate-n-lok connector that facilitates sealed panel mounting and works with existing universal mate-n-lok seals to provide a fully-sealed interconnection system available in 4, 6, 9 and 12 positions sealed, flange mount design mates to standard universal mate-n-lok plug housings accepts standard universal mate-n-lok contacts works with standard universal mate-n-lok connector interface and wire seals anti-rotation feature aids installation rear mount flange design enables use in wire harnesses pins and sockets can be intermixed in the same housing ul recognized, file no. e28476 csa certified, file no. 1030930 applications vending machines industrial machinery lighting hvac equipment performance characteristics dielectric withstanding voltage 5.0 kvac or 5.0 kvdc between adjacent circuits insulation resistance 1000 megohms minimum initial between adjacent circuits voltage rating 600 v ac or dc durability 50 cycles, mating and unmating technical documents product specification 108-1031 universal mate-n-lok connectors application specification 114-1010 universal mate-n-lok contacts instruction sheet 408-10017 universal mate-n-lok bulkhead connectors r
179 catalog 82181 dimensions are in inches and dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 4-08 millimeters unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 universal mate-n-lok connectors (continued) amp soft shell pin and socket connectors universal mate-n-lok sealed bulkhead connectors .250 [6.35] centerline standard density universal mate-n-lok sealed bulkhead connectors (continued) connector housings material and finish housing nylon, ul 94v-0 rated contacts brass with pre-tin or gold plating o-ring seal neoprene locking nut steel, zinc plated 1.050 [26.67] .750 [19.05] .980 [24.89] .300 [7.62] 1.160 [29.46] 1.500 [38.10] 1.000 [25.40] ?.320 [33.53] 1.680 [42.67] recommended p anel cut-out for 4, 6 & 9 position product on ly 1.480 [37.59] ?.660 [42.16] recommended p anel cut-out for 12 position product on ly no. of pos. style housing part number 4 in line 1604256-1 6 matrix 1604210-1 9 matrix 1604254-1 12 matrix 1604941-1 note: all part numbers are rohs compliant. 4 position connector housing (shown)
180 catalog 82181 dimensions are in inches and dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 4-08 millimeters unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 universal mate-n-lok connectors (continued) amp soft shell pin and socket connectors universal mate-n-lok sealed connectors .250 [6.35] centerline standard density universal mate-n-lok sealed connectors splash proof seals product facts economical splash proof/ immersible sealed connec- tor system no design changes to exist- ing universal mate-n-lok product existing applications utiliz- ing universal mate-n-lok connectors can be upgraded to a splash proof system utilizes two wire seals and one interface seal wire range is 20-14 awg [.5-2.0] with insulation diameter range .060-.130 [1.52-3.30] .110-.130 [2.79-3.30] insulation diameter passed european ip sealing level 5/6 + 7 (swirling dust/ immersion to 1 meter for 30 minutes) .060-.110 [1.52-2.79] insulation diameter passed european ip sealing level 5/5 + 7 (swirling dust/ heavy seas) universal mate-n-lok ii keying plug can be used to seal unused circuits primary application is for wire-to-wire; wire-to-board application must use a closed bottom header a .030 [.762] .300 [7.62] a .300 [7.62] .400 [10.16] .030 [.762] .550 [13.97] .800 [20.32] a .800 [20.32] .400 [10.16] .550 [13.97] .400 [10.16] .800 [20.32] a .030 [.762] .800 [20.32] 2, 3, 4 circuit, in-line 6 circuit, matrix 9, 12, and 15 circuit, matrix wire wire interface interface wire interface plug housing mating end contact cavity wire seal pin contact sealing plug part number 770377-1 back side (wire end) silos interface seal cap housing wire seal number of a interface seal interface seal wire seal circuits dim part number low mating force* part number 2 .550 794269-1 794991-1 794270-1 3 .800 794271-1 794992-1 794272-1 4 1.050 794273-1 794274-1 6 794275-1 794993-1 794276-1 9 .800 794277-1 794994-1 794278-1 12 1.050 794279-1 794280-1 15 1.300 794281-1 794282-1 note: one interface seal and two wire seals required per mated assembly. *low mating force interface seals do not meet ip 5/6 ip 5/7 requirements. note: all part numbers are rohs compliant. material silicone rubber, blue color technical documents product specification 108-1031-1 splash proof seal, universal mate-n-lok connectors contacts page 175 housings page 174 instruction sheet 408-3392 universal mate-n-lok splash proof seals note: for proper use of this product, customer should make sure that instruction sheet 408-3392 is available for review.
181 catalog 82181 dimensions are in inches and dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 4-08 millimeters unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 universal mate-n-lok connectors (continued) amp soft shell pin and socket connectors universal mate-n-lok sealed connectors .250 [6.35] centerline standard density universal mate-n-lok sealed connectors (continued) contacts (used with splash proof seals) solid pin diameter .084 [2.13] split pin diameter .086 [2.18] stock thickness .012 [.305] unless otherwise noted. these contacts can be used in either universal mate-n-lok plug or cap housings only. related product data product specification 108-1031 universal mate-n-lok connectors application specification 114-1010 universal mate-n-lok contacts performance characteristics pages 169-170 technical documents pages 169 and 205-206 application tooling pages 207-210 housings page 174 solid pin split pin socket grounding pin (.100 [2.54] longer than standard pin) (mate first, break last, not for interrupting current) wire size ins. dia. l dim. contact part numbers hdm hand tool range range pin socket material & finish style pin socket applicator part no. awg [mm 2 ] strip form loose piece strip form loose piece part no. brass, pre-tin 350218-1 350547-1 350536-1 350550-1 brass, gold 1 350218-2 350547-2 350536-2 350550-2 brass, select gold 2 solid 350218-7 350547-7 350536-7 350550-7 .790 .760 phos. brz., pre-tin 350218-3 350547-3 350536-3 350550-3 687763-1 3 20-14 .060-.130 20.06 19.30 phos. brz., select gold 2 350218-6 350547-6 350536-6 350550-6 687763-2 3 91500-1 [.5-2.0] 1.52-3.30 brass, pre-tin 350687-1 350705-1 687763-6 3 brass, gold 1 split 350687-2 350705-2 brass, select gold 2 350687-7 350705-7 .890 brass, pre-tin grounding 350654-1 350669-1 22.60 1 gold finish plated with .000030 [.000762] min. gold in mating area and inside wire barrel over .000050 [.00127] min. nickel underplate on entire contact. 2 select gold finish plated with .000030 [.000762] min. gold in mating area over .000050 [.00127] min. nickel underplate on entire contact. 3 hdm applicator part number ending in -1, is used on ampomator cls machine with t or g terminators, -2 is used on amp-o-lectric model k machine, -4 & -6 are used on amp-o-lectric model g machine. see pages 207-210 for further information. notes: 1. split pins recommended for use in housings having 6, 9, 12 and 15 circuits to reduce mating force. 2. phosphor bronze material contacts are available for use in high temperature/humidity cycling applications, consult tyco electronics. 3. 18-24 awg contacts (page 166) can be used with splash proof seals if insulation diameter range is .060-.100 [1.52-2.54]. contact insertion tool (for inserting contacts applied to small diameter wire) part no. 91002-1 is 408-7347 universal mate-n-lok ii keying plug/splash proof sealing plug is 408-3392 related product data housings page 174 technical documents pages 169 and 205-206 .940 [23.88] .130 [3.30] part number ul94v-0 nylon material 770377-1 seal latch tool part no. 794381-1 is 408-3392 contact extraction tool part no. 318851-1 is 408-4371 note: all part numbers are rohs compliant.
182 catalog 82181 dimensions are in inches and dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 4-08 millimeters unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 universal mate-n-lok connectors (continued) amp soft shell pin and socket connectors universal mate-n-lok connectors .250 [6.35] centerline standard density universal mate-n-lok connectors pc board vertical pin headers .250 [6.35] centerline spacing material housing ul94v-2 nylon, natural color ul94v-0 nylon contacts phosphor bronze solder tail diameter .062 [1.57] related product data product specification 108-1053 universal mate-n-lok pc board headers performance characteristics pages 169-170 recommended pc board hole layout page 184 technical documents pages 169 and 205-206 mating connectors universal mate-n-lok plug housings page 174 universal mate-n-lok ii plug housings pages 193-194 mates with plug pin header part numbers housing part number number of a flammability pin standard standard tail (using socket contacts) circuits dim. rating finish tail 2 polarized 2 long tail 3 universal universal mate-n-lok mate-n-lok ii ul94v-2 pre-tin 350428-1 641963-1 350582-1 1-480698-0 duplex 1 350428-4 641963-3 350582-4 2 .550 pre-tin 350786-1 641964-1 350787-1 13.97 ul94v-0 1-641964-1 4 350777-1 770017-1 duplex 1 350786-3 641964-3 350787-3 ul94v-2 pre-tin 350429-1 641965-1 350583-1 1-480700-0 duplex 1 350429-4 350583-4 3 .800 pre-tin 350789-1 641966-1 350790-1 20.32 ul94v-0 1-641966-1 4 350766-1 770018-1 duplex 1 350789-3 350790-3 pre-tin 350430-1 641967-1 350584-1 ul94v-2 pre-tin 770351-1 5 1-480702-0 4 1.050 duplex 1 350430-4 350584-4 26.67 ul94v-0 pre-tin 350792-1 641968-1 350793-1 350779-1 770019-1 duplex 1 350792-3 350793-3 ul94v-2 pre-tin 640466-1 643405-1 1-480763-0 5 1.300 duplex 1 640466-3 33.02 ul94v-0 pre-tin 640900-1 643406-1 350809-1 770016-1 duplex 1 640900-3 6 1.550 ul94v-2 pre-tin 641832-1 643407-1 640585-1 39.37 ul94v-0 pre-tin 641831-1 643408-1 640581-1 2.050 ul94v-2 pre-tin 641825-1 770143-1 640586-1 8 ul94v-0 pre-tin 641828-1 643410-1 770272-1 640582-1 52.07 ul94v-0 duplex 1 643410-3 770272-3 mates with plug pin header part numbers housing part number number of a flammability pin standard standard tail (using socket contacts) circuits dim. rating finish tail 2 polarized 2 long tail 3 universal universal mate-n-lok mate-n-lok ii pre-tin 350431-1 641969-1 350585-1 ul94v-2 643749-1 5 1-480704-0 6 .550 duplex 1 350431-4 350585-4 13.97 pre-tin 350711-1 641970-1 350732-1 ul94v-0 1-641970-1 4 350715-1 770020-1 duplex 1 350711-4 641970-3 350732-4 ul94v-2 pre-tin 350432-1 641971-1 350586-1 1-480706-0 .800 duplex 1 350432-4 641971-3 350586-4 9 20.32 pre-tin 350712-1 641972-1 350742-1 ul94v-0 1-641972-1 4 350720-1 770021-1 duplex 1 350712-4 641972-3 350742-4 ul94v-2 pre-tin 350433-1 641973-1 350587-1 1-480708-0 duplex 1 350433-4 350587-4 12 1.050 pre-tin 350713-1 641974-1 350737-1 26.67 ul94v-0 1-641974-1 4 350735-1 770022-1 duplex 1 350713-4 641974-3 350737-4 ul94v-2 pre-tin 350434-1 641975-1 350588-1 1-480710-0 15 1.300 duplex 1 350434-4 350588-4 33.02 ul94v-0 pre-tin 350714-1 641976-1 350738-1 350736-1 770023-1 duplex 1 350714-4 641976-4 350738-4 1 duplex finish plated with .000030 [.000762] min. gold in mating area, matte tin on solder tail end over .000050 [.00127] min. nickel underplate on entire contact. 2 use standard tail for .062 [1.57] thick pc board. 3 use long tail for .125 [3.18] thick pc board. 4 black in color. 5 no drain holes, used w/ seals, page 180. note: all part numbers are rohs compliant. .175 standard tail [4.45] .235 long tail [5.97] .300 [7.62] .550 [13.97] .175 standard tail [4.45] .235 long tail [5.97] .800 [20.32] 2, 3, 4, 5, 6 and 8 circuit, in-line 6, 9, 12 and 15 circuit, matrix polarizing feature polarizing feature .550 [13.97] note: header housings on pages 182-185 are available in colors listed on page 188. call technical support for exact part numbers.
183 catalog 82181 dimensions are in inches and dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 4-08 millimeters unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 universal mate-n-lok connectors (continued) amp soft shell pin and socket connectors universal mate-n-lok connectors .250 [6.35] centerline standard density pc board vertical socket headers .250 [6.35] centerline spacing material housing ul94v-2 nylon, natural color ul94v-0 nylon contacts phosphor bronze solder tail diameter .062 [1.57] related product data product specification 108-1053 universal mate-n-lok pc board headers performance characteristics pages 169-170 recommended pc board hole layout page 184 technical documents pages 169 and 205-206 mating connectors universal mate-n-lok plug housings page 174 universal mate-n-lok ii plug housings pages 193-194 2, 3, 4, 5, and 6 circuit, in-line mates with plug socket header part numbers housing part number number of a flammability socket standard standard tail (using pin contacts) circuits dim. rating finish tail 2 polarized 2 long tail 3 universal universal mate-n-lok mate-n-lok ii ul94v-2 pre-tin 350759-4 643411-1 350986-4 1-480698-0 2 .550 duplex 1 350759-5 13.97 ul94v-0 pre-tin 350824-1 643412-1 350831-1 350777-1 770017-1 duplex 1 350824-4 643412-3 ul94v-2 pre-tin 350760-4 643413-1 350987-4 1-480700-0 3 .800 duplex 1 350760-5 20.32 ul94v-0 pre-tin 350825-1 643414-1 350832-1 350766-1 770018-1 duplex 1 350825-4 643414-3 350832-4 ul94v-2 pre-tin 350761-4 643415-1 350988-4 1-480702-0 4 1.050 duplex 1 350761-5 350988-5 26.67 ul94v-0 pre-tin 350826-1 643416-1 350833-1 350779-1 770019-1 duplex 1 350826-4 350833-4 ul94v-2 pre-tin 640467-1 1-480763-0 5 1.300 pre-tin 640467-3 33.02 ul94v-0 pre-tin 640901-1 350809-1 770016-1 duplex 1 640901-3 6 1.550 ul94v-0 duplex 1 770262-3 640581-1 39. 37 mates with plug socket header part numbers housing part number number of a flammability socket standard standard tail (using pin contacts) circuits dim. rating finish tail 2 polarized 2 long tail 3 universal universal mate-n-lok mate-n-lok ii ul94v-2 pre-tin 350762-4 643423-1 350989-4 1-480704-0 6 .550 duplex 1 350762-5 350989-5 13.97 ul94v-0 pre-tin 350827-1 643424-1 350834-1 350715-1 770020-1 duplex 1 350827-4 643424-3 350834-4 ul94v-2 pre-tin 350763-4 643425-1 350990-4 1-480706-0 9 .800 duplex 1 350763-5 350990-5 20.32 ul94v-0 pre-tin 350828-1 643426-1 350835-1 350720-1 770021-1 duplex 1 350828-4 643426-3 350835-4 ul94v-2 pre-tin 350764-4 350991-4 1-480708-0 12 1.050 duplex 1 350764-5 350991-5 26.67 ul94v-0 pre-tin 350829-1 643428-1 350836-1 350735-1 770022-1 duplex 1 350829-4 350836-4 ul94v-2 pre-tin 350765-4 643429-1 350992-4 1-480710-0 15 1.300 duplex 1 350765-5 33.02 ul94v-0 pre-tin 350830-1 643430-1 350837-1 350736-1 770023-1 duplex 1 350830-4 350837-4 1 duplex finish plated with .000030 [.000762] min. gold in mating area, matte tin on solder tail end over .000050 [.00127] min. nickel underplate on entire contact. 2 use standard tail for .062 [1.57] thick pc board. 3 use long tail for .125 [3.18] thick pc board. .175 standard tail [4.45] .235 long tail [5.97] .300 [7.62] polarizing feature .550 [13.97] 6, 9, 12 and 15 circuit, matrix .550 [13.97] .175 standard tail [4.45] .235 long tail [5.97] .800 [20.32] polarizing feature note: all part numbers are rohs compliant. note: header housings on pages 182-185 are available in colors listed on page 188. call technical support for exact part numbers.
184 catalog 82181 dimensions are in inches and dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 4-08 millimeters unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 universal mate-n-lok connectors (continued) amp soft shell pin and socket connectors universal mate-n-lok connectors .250 [6.35] centerline standard density recommended pc board hole layouts for pin and socket vertical headers related product data vertical headers pages 182-183 8 circuit 6 circuit 5 circuit 4 circuit 3 circuit 2 circuit olarizing hole see note no. 1 position .250 [6.35] typ. dia. typ. .070 [1.78] .175 [4.45] 2, 3, 4, 5, 6 and 8 circuit, in-line 6, 9, 12 and 15 circuit, matrix polarizing hole see note .250 [6.35] typ. .250 [6.35] typ. no. 1 circuit no. 2 circuit polarizing hole see note .070 [1.78] dia. typ. .175 [4.45] .250 [6.35] typ. .250 [6.35] typ. no. 1 circuit no. 2 circuit 250 .35] typ. no. 1 circuit no. 2 circuit polarizing hole see note .250 [6.35] typ. no. 1 circuit no. 2 circuit polarizing hole see note .250 [6.35] typ. .250 [6.35] typ. .175 [4.45] .070 [1.78] dia. typ. .070 [1.78] dia. typ. .175 [4.45] .175 [4.45] .070 [1.78] dia. typ. note: polarizing hole .070 [1.78] dia. required for polarized headers only. pc board vertical pin headers with action pin contacts material and finish housing pbt, black flammability rating ul94v-0 contacts copper alloy, plated with tin over nickel on entire contact related product data performance characteristics pages 169-170 technical documents pages 169 and 205-206 product specification 108-5222 action pin universal mate-n-lok header assembly mating connectors universal mate-n-lok plug housings page 174 universal mate-n-lok ii plug housings pages 193-194 .299 [7.59] typ. a .250 [6.35] .200 [5.08 ] .004 0.10 .630 [16.00] max. recommended pc board hole layout 2 circuit 3 circuit 4 circuit .062 [1.57] ref. pc board hole dimensions .100 [2.54 ] .004 0.10 .200 [5.08 ] .004 0.10 dia. after reflow .032 [0.81 ] .002 0.05 .038 [0.97 ] .001 0.03 .0003 -.0012 [0.01 -0.03 ] .001 -.003 [0.03 -0.08 ] mates with plug housing number of part number (using socket contacts) circuits a dim. part number universal universal mate-n-lok mate-n-lok ii 2 .750 173924-1 1-480698-0 770017-1 19.05 350777-1 3 1.000 173925-1 1-480700-0 770018-1 25.40 350766-1 4 1.250 173926-1 1-480702-0 770019-1 31.75 350779-1 note: install in pc board with arbor tool. note: all part numbers are rohs compliant. note: header housings on pages 182-185 are available in colors listed on page 188. call technical support for exact part numbers.
185 catalog 82181 dimensions are in inches and dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 4-08 millimeters unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 universal mate-n-lok connectors (continued) amp soft shell pin and socket connectors universal mate-n-lok connectors .250 [6.35] centerline standard density pc board right-angle pin and socket headers .250 [6.35] centerline spacing material housing nylon contacts phosphor bronze solder tail width .052 [1.32] related product data product specification 108-1053 universal mate-n-lok pc board headers performance characteristics pages 169-170 technical documents pages 169 and 205-206 mating connectors universal mate-n-lok plug housings page 174 universal mate-n-lok ii plug housings pages 193-194 test connectors (with spring loaded contacts) material housing nylon flammability rating ul94v-0 related product data mating connectors housings and headers having the same number of circuits. the housings can have pin or socket contacts, or a combination of both. mating housings page 174 mating headers pages 182-185 other mating connectors universal mate-n-lok ii housings pages 193-194 notes: 1. test probes have 5 amp maxi- mum current rating. 1,000,000 cycles. 2. test connector housings are of the same configuration as stan- dard housings. refer to page 23 for dimensional specifications. number of part numbers circuits plug cap 2 350848-2 350849-2 3 350848-3 350849-3 4 350848-4 350849-4 5 350848-5 350849-5 6 350848-6 350849-6 9 350848-9 350849-9 12 1-350848-2 1-350849-2 15 1-350848-5 1-350849-5 2, 3, 4 and 5 circuit, in-line 6, 9, 12 and 15 circuit, matrix .680 [17.27] .360 [9.14] .250 [6.35] .160 [4.06] plug plug cap cap .084 [2.13] dia. pin mates with universal mate-n-lok sockets recommended pc board hole layout .062 [1.57] board thickness .060 [1.52] .150 [3.81] 2 places .505 [12.83] .290 [7.37] .250 [6.35] typ. .100 [2.54] no. 1 circuit dia. dia. typ. typ. 2, 3, 4, 5, 6 and 8 circuit, in-line use 6-32 unc pan head screw 3/8 [9.53] long for mounting (not supplied) right-angle header part numbers no. of dimensions contact ul94v-2 ul94v-0 circuits ab c finish mates with pin socket mates pin socket universal universal with mate-n-lok mate-n-lok ii .550 1.245 .830 pre-tin 1-350942-0 643226-1 2 770994-1 2 350777-1 770017-1 13.97 31.62 21.08 duplex 1 3-350942-0 3 .800 1.495 1.080 pre-tin 1-350943-0 643228-1 350766-1 770018-1 20.32 37.97 27.43 duplex 1 3-350943-0 3-643228-0 4 1.050 1.745 1.330 pre-tin 1-350948-0 1-480702-0 1-350944-0 643230-1 350779-1 770019-1 26.67 44.32 33.78 duplex 1 3-350944-0 3-643230-0 5 1.300 1.995 1.580 pre-tin 1-350949-0 1-480763-0 1-350945-0 643232-1 350809-1 770016-1 33.02 50.67 40.13 duplex 1 3-350945-0 3-643232-0 6 1.550 2.245 1.830 pre-tin 640587-1 643235-1 640585-1 640583-1 643234-1 640581-1 39.37 57.02 46.48 duplex 1 640583-3 3-643234-0 8 2.050 2.745 2.330 pre-tin 643237-1 640586-1 640584-1 643236-1 640582-1 52.07 69.72 59.18 duplex 1 640584-3 3-643236-0 1 duplex finish plated with .000030 [.000762] min. gold in mating area, matte tin on solder tail end over .000050 [.00127] min. nickel underplate on entire contact. 2 black in color. note: all part numbers are rohs compliant. note: header housings on pages 182-185 are available in colors listed on page 188. call technical support for exact part numbers.
186 catalog 82181 dimensions are in inches and dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 4-08 millimeters unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 universal mate-n-lok connectors (continued) amp soft shell pin and socket connectors universal mate-n-lok circular connectors .250 [6.35] centerline standard density universal mate-n-lok circular connectors applications primary applications are in the lighting, vending, and appliance industries applications where use of a completed harness that will pass through a 7/8 inch knock-out is required provides the capability to quickly disconnect individual fixtures from sensitive environmental areas and perform maintenance at other sites not for interrupting current product facts unique product designed to accommodate the specific needs of the lighting industry circular design allows the connector to pass through 7/8 inch knock-out holes in electrical fixtures and boxes 6-position accommodates most major electrical industry requirements universal mate-n-lok connector centerline spacing maintains ul and csa approvals uses standard universal mate-n-lok contacts and application tooling positive polarized housing helps prevent incorrect mating ul recognized, file no. e28476 csa certified, file no. lr7189 performance characteristics voltage 600 v ac or dc current 20 amps maximum per ul-1977 (6 position, fully ener- gized) dielectric withstanding voltage 5 kvac or kvdc insulation resistance 1000 m? max. between adjacent circuits durability 50 cycles mating and unmating contact retention 15 lb. minimum per contact r technical documents product specification 108-2069 universal mate-n-lok circular connector application specification 114-1010 universal mate-n-lok connectors
187 catalog 82181 dimensions are in inches and dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 4-08 millimeters unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 universal mate-n-lok connectors (continued) amp soft shell pin and socket connectors universal mate-n-lok circular connectors .250 [6.35] centerline standard density universal mate-n-lok circular connectors (continued) material and finish housings nylon, ul 94v-2 rated related product data contacts pages 172-173 .810 [20.57] ref. 1.080 [27.43] .460 [11.68] .820 [20.83] ref. 45? 2 plc. plug part no. 794911-1 .810 [20.57] 1.080 [27.43] .820 [20.83] 45? 2 plc. cap part no. 794912-1 note: all part numbers are rohs compliant.
188 catalog 82181 dimensions are in inches and dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 4-08 millimeters unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 universal mate-n-lok connectors (continued) amp soft shell pin and socket connectors standard density universal mate-n-lok connectors available in colors universal mate-n-lok connectors available in colors .250 [6.35] centerline base part number no. of circuits housing material 480698 2 plug v-2 480699 2 cap v-2 480700 3 plug v-2 480701 3 cap v-2 480702 4 plug v-2 480703 4 cap v-2 480763* 5 plug* v-2 480764* 5 cap* v-2 480704 6 plug v-2 480705 6 cap v-2 480706 9 plug v-2 480707 9 cap v-2 480708 12 plug v-2 480709 12 cap v-2 480710 15 plug v-2 480711 15 cap v-2 350777 2 plug v-0 350778 2 cap v-0 350766 3 plug v-0 350767 3 cap v-0 350799 4 plug v-0 350780 4 cap v-0 350809 5 plug v-0 350810 5 cap v-0 350715 6 plug v-0 350781 6 cap v-0 350720 9 plug v-0 350782 9 cap v-0 350735 12 plug v-0 350783 12 cap v-0 350736 15 plug v-0 350784 15 cap v-0 dash number color 1-xxxxxx-0 natural 1-xxxxxx-1 brown 1-xxxxxx-2 red 1-xxxxxx-3 orange 1-xxxxxx-4 yellow 1-xxxxxx-5 green 1-xxxxxx-6 blue 1-xxxxxx-8 gray 1-xxxxxx-9 black * special for base part numbers 480763 and 480764 dash number color xxxxxx-1 natural 1-xxxxxx-1 brown 1-xxxxxx-2 red 1-xxxxxx-3 orange 1-xxxxxx-4 yellow 1-xxxxxx-5 green 1-xxxxxx-6 blue 1-xxxxxx-8 gray 1-xxxxxx-9 black note: see corresponding universal mate-n-lok plug and cap housing base part numbers on page 175. header housings on pages 182-185 are also available in colors . call technical support for exact part numbers.
189 catalog 82181 dimensions are in inches and dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 4-08 millimeters unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 universal mate-n-lok ii connectors amp soft shell pin and socket connectors standard density universal mate-n-lok ii connectors .250 [6.35] centerline performance characteristics the universal mate-n-lok ii connector performance characteristics found on pages 189-190 are based on free-hanging and panel mount connec- tors, loaded with contacts crimped on stranded wire. dielectric withstanding voltage 5.0 kv ac or dc between adjacent circuits initially insulation resistance 1000 megohms minimum between adjacent circuits voltage rating 600 v ac or dc connector mating split pin 1.5 lb. max. per circuit connector unmating split pin .5 lb. min. per circuit contact insertion force 3.0 lb. max. per contact unassembled contact retention 35 lb. min. per contact durability 50 cycles, mating and unmating product facts high reliability for use where repair or re- placement would be difficult pins and sockets can be intermixed in the same housing available in 2 through 15 circuit sizes for free- hanging or panel mount wire-to-wire connection mate with standard universal mate-n-lok housings and pc board headers uses standard universal mate-n-lok panel cutouts and strain reliefs polarized housings available in ul94v-0 flammability rated material enclosed contacts for shock protection f-crimp terminals accept 30-10 awg [.05 -5.0 mm 2 ] wire sizes contacts available in strip and loose form lanceless contacts for tangle-free handling insulation capability to .200 [5.08] diameter connector design provides for complete contact insertion three-point stabilization pre- cisely controls contact align- ment, minimizing stubbing tin or duplex gold plated contacts contacts are on .250 [6.35] centerline spacing not for interrupting current recognized under the component program of underwriters laboratories inc., file no. e28476 certified by canadian standards association, file no. lr 7189 passed test by vde under their registration number 3980/continuous surveillance r r technical documents product specification 108-1090 universal mate-n-lok ii connectors application specification 114-1043 universal mate-n-lok ii connectors instruction sheet 408-3200 housing, contacts and accessories
190 catalog 82181 dimensions are in inches and dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 4-08 millimeters unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 universal mate-n-lok ii connectors (continued) amp soft shell pin and socket connectors universal mate-n-lok ii connectors .250 [6.35] centerline standard density performance characteristics (continued) maximum current maximum cur- rent rating of universal mate-n-lok ii connectors is limited by the maximum operating temperature of the housings which is 120c including the tempera- ture rise of the contacts which is a maxi- mum of 30c. there are several variables which have a direct effect on this maximum current-carrying capabil- ity for a given connector and must be considered for each application. these variables are: wire size larger diameter wire will carry more current since it has less internal resistance to current flow and thus generates less heat. longer wire lengths also enhance current carrying capabilities since the wire conducts heat away from the connector. connector size in general, the more circuits in a connector, the less current can be carried. ambient temperature the higher the ambient temperature, the less current can be carried in any given connector. universal mate-n-lok ii connectors also will withstand the following tests: vibration 10-55-10 cycles per minute at .06 inch total excursion physical shock 18 drops, 50 g sawtooth at 10 milliseconds housing panel retention 75 lb. min. housing lock strength 35 lb. min. thermal shock -55c to +85c temperature-humidity cycling 25c to 65c at 95 rh corrosion 48 hr. at 5% salt concentration related product data product specification 108-1090 universal mate-n-lok ii connectors termination contact resistance crimp wire size test resistance tensile force awg mm 2 current milliohms force (min.) (amps) (max. init.) lbs. n 30 .05 1.5 7 28 .08 3 13 26 .12 5 22 24 .2 1.5 3.50 7 31 22 .3 3 3.50 12 53 20 .5 4.5 3.00 17 66 18 .8 6 3.00 30 133 16 1.2 8 2.75 45 200 14 2.0 10 2.75 50 222 12 3.0 60 267 10 5.0 70 311 note: this is the total resistance between wire crimps of a mated pin and socket. current rating verification for 30c maximum temperature rise 100% energized wire-to-wire minimum wire lengths for t-rise vs. current testing awg min. length (in.) awg min. length (in.) 30 2.6 18 9.4 28 3.2 16 11.3 26 4.1 14 13.7 24 5.1 12 16.4 20 7.8 10 19.3 note: if wire lengths used are less than those listed above, the current carry- ing ability of the system will be reduced due to less heat being conducted away from the connector. the customer should fully test all applications. calculated current table number of wire gauge circuits 10 12 14 16 18 20 22 24 26 30 2 19.00 18.00 17.00 14.50 13.00 10.00 8.00 6.50 5.50 3.50 3 17.50 16.50 15.50 13.00 12.00 9.00 7.50 6.00 5.00 3.00 4 16.50 15.50 15.00 12.50 11.00 8.50 7.00 5.50 4.50 3.00 5 16.00 15.00 14.00 12.00 10.50 8.00 6.50 5.50 4.50 3.00 6 matrix 15.00 14.00 13.00 11.00 9.50 7.50 6.00 5.00 4.00 2.50 8 14.50 14.00 13.00 10.50 9.50 7.50 6.00 5.00 4.00 2.50 9 13.50 12.50 11.50 9.50 8.50 6.50 5.50 4.50 3.50 2.00 10 14.00 13.00 12.50 10.00 9.00 7.00 5.50 4.50 3.50 2.50 12 12.50 12.00 11.00 9.00 8.00 6.00 5.00 4.00 3.00 2.00 15 12.00 11.50 10.00 8.50 7.50 6.00 4.50 4.00 3.00 2.00 values are based on initial temperature rise versus current testing and are intended to be a guide in the selection of a connector family. all applications should be tested by the end user. the values listed are per circuit for fully loaded housings being 100% energized. note: all combinations were not tested, and this chart contains interpolated and extrapolated values. wire-to-board due to the vast differences in trace geometry and printed circuit board configurations, we are unable to provide a separate current carrying chart for our printed circuit board header products. however, the above wire-to-wire charts may be used as a guideline for headers if the trace width and thickness is equal to the listed wire gauge. for vertical headers, only 95% of the wire-to-wire value should be used. for right-angle headers, only 75% of the wire-to-wire value should be used. the chart values are only a tool for connector selection and will require the customer to fully test their application. termination resistance/contact crimp tensile force
191 catalog 82181 dimensions are in inches and dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 4-08 millimeters unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 universal mate-n-lok ii connectors (continued) amp soft shell pin and socket connectors standard density universal mate-n-lok ii connectors .250 [6.35] centerline universal mate-n-lok ii connector mating combinations connector part number mating connector part number pc board headers number flammability plug kit cap kit vertical pin 2 vertical socket 2 right-angle 2 of style part part plating standard standard long standard standard long pin socket circuits rating number 2 number 2 tail tail tail polarized tail tail polarized tail 2 ul94v-0 in-line 770017-1 770024-1 pre-tin 350786-1 641964-1 350787-1 350824-1 643412-1 350831-1 1-350942-0 643226-1 duplex 1 350786-3 641964-3 350787-3 350824-4 643412-3 3-350942-0 3 ul94v-0 in-line 770018-1 770025-1 pre-tin 350789-1 641966-1 350790-1 350825-1 643414-1 350832-1 1-350943-0 643228-1 duplex 1 350789-3 350790-3 350825-4 643414-3 350832-4 3-350943-0 3-643228-0 4 ul94v-0 in-line 770019-1 770026-1 pre-tin 350792-1 641968-1 350793-1 350826-1 643416-1 350833-1 1-350944-0 643230-1 duplex 1 350792-3 350793-3 350826-4 350833-4 3-350944-0 3-643230-0 5 ul94v-0 in-line 770016-1 pre-tin 640900-1 643406-1 640901-1 1-350945-0 643232-1 duplex 1 640900-3 640901-3 3-350945-0 3-643232-0 6 ul94v-0 matrix 770020-1 770027-1 pre-tin 350711-1 641970-1 350732-1 350827-1 643424-1 350834-1 duplex 1 350711-4 641970-3 350732-4 350827-4 643424-3 350834-4 9 ul94v-0 matrix 770021-1 770028-1 pre-tin 350712-1 641972-1 350742-1 350828-1 643426-1 350835-1 duplex 1 350712-4 641972-3 350742-4 350828-4 643426-3 350835-4 12 ul94v-0 matrix 770022-1 770029-1 pre-tin 350713-1 641974-1 350737-1 350829-1 643428-1 350836-1 duplex 1 350713-4 641974-3 350737-4 350829-4 350836-4 15 ul94v-0 matrix 770023-1 770030-1 pre-tin 350714-1 641976-1 350738-1 350830-1 643430-1 350837-1 duplex 1 350714-4 641976-4 350738-4 350830-4 350837-4 1 duplex finish plated with .000030 [.000762] min. gold in mating area, matte tin on solder tail end over .000050 [.00127] min. nickel underplate on entire contact. 2 universal mate-n-lok ii plug and cap housings accept pin or socket contacts. use the appropriate contacts in the plug housing as required by the mating component. note: all part numbers are rohs compliant.
192 catalog 82181 dimensions are in inches and dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 4-08 millimeters unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 universal mate-n-lok ii connectors (continued) amp soft shell pin and socket connectors universal mate-n-lok ii connectors .250 [6.35] centerline standard density contacts split pin diameter .086 [2.18] stock thickness .012 [.305] these contacts can be used in either universal mate-n-lok ii plug or cap housings. related product data product specification 108-1090 universal mate-n-lok ii connectors application specification 114-1043 universal mate-n-lok ii contacts performance characteristics pages 189-190 housings pages 193-194 technical documents pages 189 and 205-206 application tooling pages 207-210 contact extraction tool (for extracting contacts crimped on 24 awg or smaller wire) part no. 318851-1 is 408-4371 latch disengaging tool part no. 58382-1 is 408-9436 contact insertion tool (for inserting contacts applied to small diameter wire) part no. 91002-1 is 408-7347 pin socket grounding pin (mate first, break last, not for interrupting current) solid pin diameter .084 [2.13] .100 [2.54] longer than standard pin stock thickness .012 [.304] these contacts can be used in either universal mate-n-lok ii plug or cap housings only. l l l contact part numbers wire size ins. dia. l dim. pin socket hdm hand tool range range pin socket material & finish strip loose strip loose applicator part no. awg [mm 2 ] form piece form piece part no. 30 -26 .032 -.057 1.005 .980 phos. brz. gold 1 770011-6 770512-6 770012-6 770416-6 567252-1 6 58439-1 [.05 -.12] .813 -1.45 25.53 24.90 567252-4 6 brass. pre-tin 770009-1 770252-1 24 -18 .040 -100 1.005 .980 brass. duplex 2 1-770009-0 1-770252-0 567214-1 6 91510-1 [.2 -.8] 1.02 -2.54 25.53 24.90 phos. brz. pre-tin 770010-3 770253-3 567214-2 6 phos. brz. duplex 2 1-770010-0 1-770253-0 567214-4 6 brass. pre-tin 770007-1 770250-1 .060 -.130 1.005 .980 brass. duplex 2 1-770007-0 1-770250-0 567213-1 6 91500-1 1.52 -3.30 25.53 24.90 phos. brz. pre-tin 770008-3 770251-3 567213-2 6 20 -14 phos. brz. duplex 2 1-770008-0 1-770251-0 567213-4 6 [.5 -2.0] brass. pre-tin 770005-1 770248-1 .130 -.200 .995 .970 brass. duplex 2 1-770005-0 1-770248-0 567212-1 6 91508-1 4 3.30 -5.08 25.27 24.63 phos. brz. pre-tin 770005-3 770006-3 770249-3 567212-2 6 91506-1 4 phos. brz. duplex 2 1-770005-1 1-770006-0 1-770249-0 567212-4 6 12 -10 .200 max. 3 1.005 .980 phos. brz. pre-tin 770003-3 770246-3 770004-3 770247-3 567211-1 6 567211-2 6 69710-1 5 [3.0 -5.0] 5.08 25.53 24.90 phos. brz. duplex 2 1-770003-0 1-770246-0 1-770004-0 1-770247-0 567211-4 6 1 gold finish plated with .000030 [.000762] min. gold in mating area and inside wire barrel over .000050 [.00127] min. nickel underplate on entire contact. 2 duplex finish plated with .000030 [.000762] min. gold in mating area and .000050 [.00127] min. tin in crimp area over .000050 [.00127] min. nickel underplate on entire contact. 3 there is no insulation barrel on this contact. insulation maximum diameter is limited by the housing. use of strain relief is recommended with these contacts. 4 use hand tool no. 91508-1 for 20 C 18 awg and no. 91506-1 for 1 6C 14 awg. 5 hand tool no. 69710-1 uses die set no. 58380-1 for 12 awg and no. 58380-2 for 10 awg. 6 hdm applicator part number ending in -1 is used on ampomator cls machine with t or g terminators, -2 is used on amp-o-lectric model k machine, -4 is used on amp-o-lectric model g machine. see pages 207-210 for further information. wire size ins. dia. l contact part numbers hdm hand tool range material & finish applicator awg [mm 2 ] range dim. strip form loose piece part no. part no. .060 -.130 1.105 brass. pre-tin 770193-1 770254-1 567213-1 3 567213-2 3 91500-1 20 -14 1.52-3.30 25.53 brass. duplex 1 1-770193-0 1-770254-0 567213-4 3 [.5 -2.0] .130-.200 1.085 brass. pre-tin 770194-1 770255-1 567212-1 3 91508-1 2 567212-2 3 91506-1 2 3.30-5.08 27.56 brass. duplex 1 1-770194-0 1-770255-0 567212-4 3 1 duplex finish plated with .000030 [.000762] min. gold in mating area and .000050 [.00127] min. tin in crimp area over .000050 [.00127] min. nickel underplate on entire contact. 2 use hand tool no. 91508-1 for 20 C18 awg and no. 91506-1 for 16 C14 awg. 3 hdm applicator part number ending in -1 is used on ampomator cls machine with t or g terminators, -2 is used on amp-o-lectric model k machine, -4 is used on amp-o-lectric model g machine. see pages 207-210 for further information. note: all part numbers are rohs compliant.
193 catalog 82181 dimensions are in inches and dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 4-08 millimeters unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 universal mate-n-lok ii connectors (continued) amp soft shell pin and socket connectors standard density universal mate-n-lok ii connectors .250 [6.35] centerline housing kits free-hanging or panel mount .250 [6.35] centerline spacing material nylon flammability rating ul 94v-0 related product data product specification 108-1090 universal mate-n-lok ii connectors performance characteristics pages 189-190 contacts page 192 panel cutout recommendations page 195 keying plug page 196 strain reliefs page 196 kit components page 195 technical documents pages 189 and 205-206 other mating connectors universal mate-n-lok housings page 175 universal mate-n-lok header s pages 182-183 and 185 universal mate-n-lok test connectors page 185 3, 4 and 5 circuit, in-line plug rear cap front cap front plug rear plug front cap rear cap rear plug front 2 circuit, in-line .550 [13.97] .580 [14.73] .845 [21.46] max. .300 [7.62] .550 [13.97] .550 [13.97] .905 [22.98] .580 [14.73] .845 [21.46] max. .550 [13.97] .905 [22.98] .300 [7.62] a .580 [14.73] .300 [7.62] a .845 [21.46] max. .905 [22.98] .845 [21.46] max. .580 [14.73] a a .300 [7.62] .905 [22.98] number kit part numbers of a (includes front and rear) circuits dim. plug cap 2 770017-1 770024-1 3 .800 770018-1 770025-1 20.32 4 1.050 770019-1 770026-1 26.67 5 1.300 770016-1 4 33.02 notes: 1. kits consist of a front and rear component. 2. kit components can be purchased separately. page 195. 3. packaging: bulk 250 each component per poly bag/box. 4. mates with standard universal mate-n-lok cap housing p/n 350810-1 and 640900-x or 640901-x vertical headers. note: all part numbers are rohs compliant.
194 catalog 82181 dimensions are in inches and dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 4-08 millimeters unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 universal mate-n-lok ii connectors (continued) amp soft shell pin and socket connectors universal mate-n-lok ii connectors .250 [6.35] centerline standard density housing kits free-hanging or panel mount .250 [6.35] centerline spacing material nylon flammability rating ul 94v-0 related product data product specification 108-1090 universal mate-n-lok ii connectors performance characteristics pages 189-190 contacts page 192 panel cutout recommendations page 195 keying plug page 196 strain reliefs page 196 kit components page 195 technical documents pages 189 and 205-206 other mating connectors universal mate-n-lok housings page 176 universal mate-n-lok header s pages 182-183 and 185 universal mate-n-lok test connectors page 185 9, 12 and 15 circuit, matrix plug rear cap front cap front plug rear plug front cap rear cap rear plug front 6 circuit, matrix 1.080 [27.43] .845 [21.46] max. .550 [13.97] .550 [13.97] .800 [20.32] .905 [22.99] 1.020 [25.91] .905 [22.99] .800 [20.32] .550 [13.97] .845 [21.46] max. .550 [13.97] 1.080 [27.43] 1.080 [27.43] 1.020 [25.91] a .905 [22.99] .845 [21.46] max. .800 [20.32] a a .905 [22.99] .800 [20.32] .845 [21.46] max. a 1.080 [27.43] number kit part numbers of a (includes front and rear) circuits dim. plug cap 6 770020-1 770027-1 9 .800 770021-1 770028-1 20.32 12 1.050 770022-1 770029-1 26.67 15 1.300 770023-1 770030-1 33.02 notes: 1. kits consist of a front and rear component. 2. kit components can be purchased separately. page 195. 3. packaging: bulk 250 each component per poly bag/box. note: all part numbers are rohs compliant.
195 catalog 82181 dimensions are in inches and dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 4-08 millimeters unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 universal mate-n-lok ii connectors (continued) amp soft shell pin and socket connectors standard density universal mate-n-lok ii connectors .250 [6.35] centerline number kit component part numbers of plug cap circuits kit front rear kit front rear 2 770017-1 770031-1 770032-1 770024-1 770045-1 770046-1 3 770018-1 770033-1 770034-1 770025-1 770047-1 770048-1 4 770019-1 770035-1 770036-1 770026-1 770049-1 770050-1 5 770016-1 770319-1 770320-1 6 770020-1 770037-1 770038-1 770027-1 770051-1 770052-1 9 770021-1 770039-1 770040-1 770028-1 770053-1 770054-1 12 770022-1 770041-1 770042-1 770029-1 770055-1 770056-1 15 770023-1 770043-1 770044-1 770030-1 770057-1 770058-1 notes: 1. kits consist of a front and rear component. 2. kit components can be purchased separately. note: all part numbers are rohs compliant. recommended cap housing panel cutouts view is from cap entry side refer to application specification 114-1043 notes: 1. recommended panel thickness .030-.090 [.762-2.286]. panel must be punched so that housing enters panel in same direction as the punch. 2. optional do not remove this material when keying cap housing to panel. 3. circuit #1 location when using panel keying with 6, 9, 12 and 15 circuit housings. 4. circuit #1 location when using panel keying with 2, 3, and 4 circuit housings. .100 [2.54] d b e c a .175 [4.45] .110 [2.79] .175 [4.45] note 3 note 4 note 2 number of dimensions circuits abcde 2 .565 .340 .095 .530 .250 14.35 8.63 2.41 13.46 6.35 3 .815 .340 .095 .530 .250 20.70 8.63 2.41 13.46 6.35 4 1.065 .340 .095 .530 .250 27.05 8.63 2.41 13.46 6.35 6 .565 .480 .275 1.030 .250 14.35 12.19 6.99 26.16 6.35 9 .815 .480 .275 1.030 .250 20.70 12.19 6.99 26.16 6.35 12 1.065 .480 .275 1.030 .350 27.05 12.19 6.99 26.16 8.89 15 1.315 .480 .275 1.030 .350 33.40 12.19 6.99 26.16 8.89 housing components free-hanging or panel mount .250 [6.35] centerline spacing material nylon flammability rating ul 94v-0 related product data product specification 108-1090 universal mate-n-lok ii connectors performance characteristics pages 189-190 contacts page 192 illustrations and dimensions pages 193-194 panel cutout recommendations page 195 keying plug page 196 strain reliefs page 196 technical documents pages 189 and 205-206 other mating connectors universal mate-n-lok connectors page 176 universal mate-n-lok header s pages 182-183 and 185 universal mate-n-lok test connectors page 185 front housing section rear housing section rear housing section front housing section cap housing plug housing
196 catalog 82181 dimensions are in inches and dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 4-08 millimeters unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 universal mate-n-lok ii connectors (continued) amp soft shell pin and socket connectors universal mate-n-lok ii connectors .250 [6.35] centerline standard density plug or cap housing strain reliefs is 408-3320 material nylon flammability rating ul 94v-0 keying plug is 408-3200 related product data housings pages 193-194 technical documents pages 189 and 205-206 (2) #6x3/8 lg. type b pan head sheet metal screws (not supplied) insert note 2 2 req/assy. note 3 1.300 [33.02] a (2) #6x3/8 lg. type b pan head sheet metal screws (not supplied) insert note 2 2 req/assy. note 3 1.300 [33.02] a 2, 3, 4, 5, 6, 9, 12 and 15 circuit (enclosed) .940 [23.88] .130 [3.30] style number of a insert single wire wire bundle strain relief circuits dim. supplied dia. range dia. range part numbers yes .040 C .190 640713-1 2 .960 1.02 C 4.83 24.38 no .200 C .350 640713-2 5.08 C 8.89 yes .040 C .190 640714-1 3 1.140 1.02 C 4.83 28.96 no .200 C .350 641945-1 in-line 5.08 C 8.89 yes .040 C .190 641776-1 4 1.340 1.02 C 4.83 34.04 no .200 C .350 641776-2 5.08 C 8.89 yes .040 C .190 643030-1 5 1.530 1.02 C 4.83 38.86 no .200 C .350 643030-4 5.08 C 8.89 6 1.030 yes .120 C .650 640715-1 26.16 3.05 C 16.51 9 1.030 yes .120 C .650 640716-1 matrix 26.16 3.05 C 16.51 12 1.280 yes .150 C .750 640717-1 32.51 3.81 C 19.05 15 1.530 yes .200 C .850 640718-1 38.86 5.08 C 21.59 notes: 1. insert comes attached to strain relief. it can be used to provide additional adjustment for small wire bundles or discarded. 2. insert to be positioned as shown by dotted lines. 3. strain relief part number represents one-half of a strain relief. two of a part number are required for one connector. part number ul94v-0 nylon material 770377-1 in-line matrix note: all part numbers are rohs compliant.
197 catalog 82181 dimensions are in inches and dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 4-08 millimeters unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 universal mate-n-lok headers for umnl ii connectors amp soft shell pin and socket connectors standard density universal mate-n-lok headers .250 [6.35] centerline pc board vertical pin headers .250 [6.35] centerline spacing material housing nylon flammability rating ul94v-0 contacts phosphor bronze solder tail diameter .062 [1.57] related product data product specification 108-1053 universal mate-n-lok pc board headers performance characteristics pages 189-190 recommended pc board hole layout page 199 technical documents pages 189 and 205-206 mating connectors universal mate-n-lok ii plug housings pages 193-194 universal mate-n-lok plug housings page 175 mates with plug number of a pin pin header part numbers housing part number circuits dim. finish standard standard tail long tail 3 (using socket contacts) tail 2 polarized 2 universal universal mate-n-lok ii mate-n-lok .550 pre-tin 350786-1 641964-1 350787-1 2 13.97 1-641964-1 4 770017-1 350777-1 duplex 1 350786-3 641964-3 350787-3 .800 pre-tin 350789-1 641966-1 350790-1 3 20.32 1-641966-1 4 770018-1 350766-1 duplex 1 350789-3 350790-3 4 1.050 pre-tin 350792-1 641968-1 350793-1 770019-1 350779-1 26.67 duplex 1 350792-3 350793-3 5 1.300 pre-tin 640900-1 643406-1 770016-1 350809-1 33.02 duplex 1 640900-3 1 duplex finish plated with .000030 [.000762] min. gold in mating area, matte tin on solder tail end over .000050 [.00127] min. nickel underplate on entire contact. 2 use standard tail for .062 [1.57] thick pc board. 3 use long tail for .125 [3.18] thick pc board. 4 black in color. .175 standard tail [4.45] .235 long tail [5.97] .300 [7.62] .550 [13.97] .175 standard tail [4.45] .235 long tail [5.97] .800 [20.32] 2, 3, 4 and 5 circuit, in-line 6, 9, 12 and 15 circuit, matrix polarizing feature polarizing feature .550 [13.97] mates with plug number of a pin pin header part numbers housing part number circuits dim. finish standard standard tail long tail 3 (using socket contacts) tail 2 polarized 2 universal universal mate-n-lok ii mate-n-lok 6 .550 pre-tin 350711-1 641970-1 350732-1 770020-1 350715-1 13.97 duplex 1 350711-4 641970-3 350732-4 .800 pre-tin 350712-1 641972-1 350742-1 9 20.32 1-641972-1 4 770021-1 350720-1 duplex 1 350712-4 641972-3 350742-4 1.050 pre-tin 350713-1 641974-1 350737-1 12 26.67 1-641974-1 4 770022-1 350735-1 duplex 1 350713-4 641974-3 350737-4 15 1.300 pre-tin 350714-1 641976-1 350738-1 770023-1 350736-1 33.02 duplex 1 350714-4 641976-4 350738-4 1 duplex finish plated with .000030 [.000762] min. gold in mating area, matte tin on solder tail end over .000050 [.00127] min. nickel underplate on entire contact. 2 use standard tail for .062 [1.57] thick pc board. 3 use long tail for .125 [3.18] thick pc board. 4 black in color. note: all part numbers are rohs compliant.
198 catalog 82181 dimensions are in inches and dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 4-08 millimeters unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 universal mate-n-lok headers for umnl ii connectors (continued) amp soft shell pin and socket connectors universal mate-n-lok headers .250 [6.35] centerline standard density pc board vertical socket headers .250 [6.35] centerline spacing material housing nylon flammability rating ul94v-0 contacts phosphor bronze solder tail diameter .062 [1.57] related product data product specification 108-1053 universal mate-n-lok pc board headers performance characteristics pages 189-190 recommended pc board hole layout page 199 technical documents pages 189 and 205-206 mating connectors universal mate-n-lok ii plug housings pages 193-194 universal mate-n-lok plug housings page 175 2, 3, 4 and 5 circuit, in-line 6, 9, 12 and 15 circuit, matrix .175 standard tail [4.45] .235 long tail [5.97] .300 [7.62] .550 [13.97] .175 standard tail [4.45] .235 long tail [5.97] .800 [20.32] polarizing feature polarizing feature .550 [13.97] mates with plug number of a socket socket header part numbers housing part number circuits dim. finish standard standard tail long tail 3 (using pin contacts) tail 2 polarized 2 universal universal mate-n-lok ii mate-n-lok 2 .550 pre-tin 350824-1 643412-1 350831-1 770017-1 350777-1 13.97 duplex 1 350824-4 643412-3 3 .800 pre-tin 350825-1 643414-1 350832-1 770018-1 350766-1 20.32 duplex 1 350825-4 643414-3 350832-4 4 1.050 pre-tin 350826-1 643416-1 350833-1 770019-1 350779-1 26.67 duplex 1 350826-4 350833-4 5 1.300 pre-tin 640901-1 770016-1 350809-1 33.02 duplex 1 640901-3 1 duplex finish plated with .000030 [.000762] min. gold in mating area, matte tin on solder tail end over .000050 [.00127] min. nickel underplate on entire contact. 2 use standard tail for .062 [1.57] thick pc board. 3 use long tail for .125 [3.18] thick pc board. mates with plug number of a socket socket header part numbers housing part number circuits dim. finish standard standard tail long tail 3 (using pin contacts) tail 2 polarized 2 universal universal mate-n-lok ii mate-n-lok 6 .550 pre-tin 350827-1 643424-1 350834-1 770020-1 350715-1 13.97 duplex 1 350827-4 643424-3 350834-4 9 .800 pre-tin 350828-1 643426-1 350835-1 770021-1 350720-1 20.32 duplex 1 350828-4 643426-3 350835-4 12 1.050 pre-tin 350829-1 643428-1 350836-1 770022-1 350735-1 26.67 duplex 1 350829-4 350836-4 15 1.300 pre-tin 350830-1 643430-1 350837-1 770023-1 350736-1 33.02 duplex 1 350830-4 350837-4 1 duplex finish plated with .000030 [.000762] min. gold in mating area, matte tin on solder tail end over .000050 [.00127] min. nickel underplate on entire contact. 2 use standard tail for .062 [1.57] thick pc board. 3 use long tail for .125 [3.18] thick pc board. note: all part numbers are rohs compliant.
199 catalog 82181 dimensions are in inches and dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 4-08 millimeters unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 universal mate-n-lok headers for umnl ii connectors (continued) amp soft shell pin and socket connectors standard density universal mate-n-lok headers .250 [6.35] centerline recommended pc board hole layouts for pin and socket vertical headers related product data vertical headers pages 197-198 5 circuit 4 circuit 3 circuit 2 circuit polarizing hole see note no. 1 position .250 [6.35] typ. dia. typ. .070 [1.78] .175 [4.45] 2, 3, 4 and 5 circuit, in-line 6, 9, 12 and 15 circuit, matrix polarizing hole see note .250 [6.35] typ. .250 [6.35] typ. no. 1 circuit no. 2 circuit polarizing hole see note .070 [1.78] dia. typ. .175 [4.45] .250 [6.35] typ. .250 [6.35] typ. no. 1 circuit no. 2 circuit 250 .35] typ. no. 1 circuit no. 2 circuit polarizing hole see note .250 [6.35] typ. no. 1 circuit no. 2 circuit polarizing hole see note .250 [6.35] typ. .250 [6.35] typ. .175 [4.45] .070 [1.78] dia. typ. .070 [1.78] dia. typ. .175 [4.45] .175 [4.45] .070 [1.78] dia. typ. note: polarizing hole .070 [1.78] dia. required for polarized headers only. pc board vertical pin headers with action pin contacts material and finish housing pbt, black flammability rating ul94v-0 contacts copper alloy, plated with tin over nickel on entire contact related product data performance characteristics pages 189-190 technical documents pages 189 and 205-206 product specification 108-5222 action pin universal mate-n-lok header assembly mating connectors universal mate-n-lok ii plug housings pages 193-194 universal mate-n-lok plug housings page 175 .299 [7.59] typ. a .250 [6.35] .200 [5.08 ] .004 0.10 .630 [16.00] max. recommended pc board hole layout 2 circuit 3 circuit 4 circuit .062 [1.57] ref. pc board hole dimensions .100 [2.54 ] .004 0.10 .200 [5.08 ] .004 0.10 dia. after reflow .032 [0.81 ] .002 0.05 .038 [0.97 ] .001 0.03 .0003 -.0012 [0.01 -0.03 ] .001 -.003 [0.03 -0.08 ] mates with plug housing number of part number (using socket contacts) circuits a dim. part number universal universal mate-n-lok ii mate-n-lok 2 .750 173924-1* 770017-1 350777-1 19.05 3 1.000 173925-1* 770018-1 350766-1 25.40 4 1.250 173926-1* 770019-1 350779-1 31.75 *install in pc board with arbor tool. note: all part numbers are rohs compliant.
200 catalog 82181 dimensions are in inches and dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 4-08 millimeters unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 universal mate-n-lok headers for umnl ii connectors (continued) amp soft shell pin and socket connectors universal mate-n-lok headers .250 [6.35] centerline standard density pc board right-angle pin and socket headers .250 [6.35] centerline spacing material housing nylon flammability rating ul 94v-0 contacts phosphor bronze solder tail width .052 [1.32] related product data product specification 108-1053 universal mate-n-lok pc board headers performance characteristics pages 189-190 technical documents pages 189 and 205-206 mating connectors universal mate-n-lok ii plug housings pages 193-194 universal mate-n-lok plug housings page 175 part numbers number of dimensions contact right-angle header mates with plug housing circuits a bc finish pin socket universal universal mate-n-lok ii mate-n-lok 2 .550 1.245 .830 pre-tin 1-350942-0 643226-1 770017-1 350777-1 13.97 31.62 21.08 duplex 1 3-350942-0 3 .800 1.495 1.080 pre-tin 1-350943-0 643228-1 770018-1 350766-1 20.32 37.97 27.43 duplex 1 3-350943-0 3-643228-0 4 1.050 1.745 1.330 pre-tin 1-350944-0 643230-1 770019-1 350779-1 26.67 44.32 33.78 duplex 1 3-350944-0 3-643230-0 5 1.300 1.995 1.580 pre-tin 1-350945-0 643232-1 770016-1 350809-1 33.02 50.67 40.13 duplex 1 3-350945-0 3-643232-0 1 duplex finish plated with .000030 [.000762] min. gold in mating area, matte tin on solder tail end over .000050 [.00127] min. nickel underplate on entire contact. note: all part numbers are rohs compliant. .680 [17.27] .360 [9.14] .250 [6.35] .160 [4.06] recommended pc board hole layout .062 [1.57] board thickness .060 [1.52] .150 [3.81] 2 places .505 [12.83] .290 [7.37] .250 [6.35] typ. .100 [2.54] no. 1 circuit dia. dia. typ. typ. 2, 3, 4 and 5 circuit, in-line use 6-32 unc pan head screw 3/8 [9.53] long for mounting (not supplied)
201 catalog 82181 dimensions are in inches and dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 4-08 millimeters unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 universal mate-n-lok headers for umnl ii connectors (continued) amp soft shell pin and socket connectors standard density universal mate-n-lok headers .250 [6.35] centerline high current contacts the louvertac bands have the versatility of being designed into contact dimen- sions used in existing amp connectors. universal mate-n-lok ii high current contacts have been designed to fit into an existing universal mate-n-lok ii housing. an initial t-rise test of a fully energized 4 circuit connector with 10 gage wires has shown a 31 amp capability per line with a 30 t-rise. cable-to-cable material body copper alloy louvertac band beryllium copper finish silver contact extraction tool no. 318851-1 latch disengaging tool no. 58382-1 recognized under the component program of underwriters laboratories inc., file no. e28476 certified by canadian standards association, file no. lr7189 passed test by vde under their registration number 3980/continuous surveillance design objective 108-1583 application specification 114-16021 r r connector housings no. of kit part numbers circuits plug cap 2 770017-1 770024-1 3 770018-1 770025-1 4 770019-1 770026-1 5 770016-1 6 770020-1 770027-1 9 770021-1 770028-1 12 770022-1 770029-1 15 770023-1 770030-1 cable-to-right-angle board material housing ul 94v-0 nylon contact body copper alloy louvertac band beryllium copper finish silver recognized under the component program of underwriters laboratories inc., file no. e28476 certified by canadian standards association, file no. lr7189 passed test by vde under their registration number 3980/continuous surveillance design objective 108-1594 r r connector housings no. of part numbers circuits socket header mates with plug housing 2 193839-1 770017-1 3 193839-2 770018-1 4 193839-3 770019-1 5 193839-4 770016-1 notes: 1. high current contacts with louvertac bands are not intermateable with any other contact. 2. additional information on connectors is available in amp high current products catalog 65141. 3. additional information on contacts is available in amp precision pin and socket contacts catalog 65910. standard mate-n-lok ii pin standard mate-n-lok ii socket high current socket part no. 193797-1 high current pin part no. 193796-1 plug part no. 770020-1 cap part no. 770027-1 plug part no. 770019-1 right-angle receptacle part no. 193839-3 contacts wire size contact part numbers crimp tools awg pin socket 10 193796-1 193797-1 daniels hand tool #m310 or amp p/n 356114-1 12-14 193841-1 193842-1 positioner #tp1013 or amp p/n 356337-1 note: high current contacts are not intermateable with any other universal mate-n-lok contact. note: all part numbers are rohs compliant.
202 catalog 82181 dimensions are in inches and dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 4-08 millimeters unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 universal mate-n-lok headers for umnl ii connectors (continued) amp soft shell pin and socket connectors universal mate-n-lok headers .250 [6.35] centerline standard density 15 circuit part no. 194013-1 .80 [20.32] 1.30 [33.02] .25 [6.35] typ. .55 [13.97] .17 [4.32] .03 [.76] high current vertical pin headers high current universal mate-n-lok ii vertical pin headers are designed to accept universal mate-n-lok ii plugs with high current socket contacts. all housings are polarized in order to allow proper circuit board placement. eight versions are available from 2 circuit to 15 circuits. material housing ul 94v-0 nylon contacts copper alloy finish silver recognized under the component program of underwriters laboratories inc., file no. e28476 certified by canadian standards association, file no. lr7189 passed test by vde under their registration number 3980/continuous surveillance design objective 108-1594 r r notes: 1. high current contacts with louvertac bands are not intermateable with any other contact. 2. additional information on connectors is available in amp high current products catalog 65141. 2 circuit part no. 194009-1 6 circuit part no. 194002-1 3 circuit part no. 194017-1 9 circuit part no. 194012-1 4 circuit part no. 194010-1 12 circuit part no. 194014-1 5 circuit part no. 194018-1 .35 [8.89] .55 [13.97] .17 [4.32] .03 [.76] .55 [13.97] .250 [6.35] typ. .80 [20.32] .55 [13.97] .250 [6.35] typ. .55 [13.97] .17 [4.32] .03 [.76] .30 [7.62] .80 [20.32] .25 [6.35] typ. .55 [13.97] .17 [4.32] .03 [.76] .80 [20.32] .80 [20.32] .25 [6.35] typ. .55 [13.97] .17 [4.32] .03 [.76] .30 [7.62] 1.05 [26.67] .25 [6.35] typ. .55 [13.97] .17 [4.32] .03 [.76] .80 [20.32] 1.05 [26.67] .25 [6.35] typ. .55 [13.97] .17 [4.32] .03 [.76] .30 [7.62] 1.30 [33.02] .25 [6.35] typ. .55 [13.97] .17 [4.32] .03 [.76]
203 catalog 82181 dimensions are in inches and dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 4-08 millimeters unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 .156 mate-n-lok connectors amp soft shell pin and socket connectors .156 mate-n-lok connectors .390 [9.91] centerline standard density product facts positive polarized nylon housings panel mount or free-hanging numbered cavities for easy circuit identification removable, crimp snap-in contacts contacts accept 20-10 awg wire sizes pin contacts are used in cap housings, socket contacts are used in plug housings not for interrupting current recognized under the component program of underwriters laboratories inc., file no. e28476 certified by canadian standards association file no. lr7189 r wire size ins. dia. contact part number hdm 1 hand tool range pin socket applicator awg [mm 2 ] range strip form loose piece strip form loose piece part no. part no. 20-14 466462-1 [.5-2.0] .125 max. 61086-1 61251-1 61085-1 61250-1 466462-2 58631-1 466462-3 12-10 .185 max. 61234-1 61253-1 61233-1 61252-1 687765-2 58632-1 [3.0-6.0] 687765-3 1 to be used with appropriate application machine. see pages 201-204 for further information. note: all part numbers are rohs compliant. .925 [2.35] pin used in caps socket used in plugs .760 [1.93] insertion tool part no. 91002-1 (is 408-7347) extraction tool part no. 691458-1 (pins) part no. 691458-2 (sockets) (is 408-4322) contacts pin diameter .156 [3.96] material and finish contacts brass, pre-tin plated stock thickness .018 [.457]
204 catalog 82181 dimensions are in inches and dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 4-08 millimeters unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 .156 mate-n-lok connectors (continued) amp soft shell pin and socket connectors .156 mate-n-lok connectors .390 [9.91] centerline standard density .430 [10.92] a 1.220 [30.99] .390 [9.91] 1.220 [30.99] a .430 [10.92] .390 [9.91] .210 [5.33] .370 [9.40] .480 [12.19] .180 [4.57] 1.17 [29.72] .450 [11.43] ref. 1.91 [48.51] ref. r .225 [5.72] 4 plc. 1.020 [25.91] .460 [11.68] a .430 [10.92] .390 [9.91] pin housing (cap) free-hanging part number 794117-1 pin housing (cap) panel mount part number 794118-1 socket housing (plug) part number 794116-1 panel mount cutout housings free-hanging or panel mount related product data contacts page 203 product specification 108-8002 application specification 114-1109 material housings nylon, natural color flammability ratingul94v-2 number of a cap circuits dim. plug free-hanging panel mount 3 .048 794412-1 794413-1 1.210 4 .063 794116-1 794117-1 794118-1 1.590 note: all part numbers are rohs compliant. note: panel must be punched in the same direction as the housing will be inserted.
205 catalog 82181 dimensions are in inches and dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 4-08 millimeters unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 technical documents amp soft shell pin and socket connectors technical documents related product data connectors 2.5 mm signal double lock (sdl) pages 9-16 micro mate-n-lok 3 mm pages 17-47 grace inertia connectors (gic) 3.5 pages 49-52 .062 commercial pin and socket pages 53-57 power double lock (pdl) pages 59-81 mini universal mate-n-lok pages 83-94 mini universal mate-n-lok 2 pages 99-107 (mr) miniature rectangular pages 109-118 val-u-lok connector system pages 119-124 amp-duac pages 125-133 5.0 mm power key connectors (pkc) pages 135-141 .093 commercial pin and socket pages 143-149 commercial mate-n-lok pages 151-162 .140 mate-n-lok pages 165-167 universal mate-n-lok pages 169-188 universal mate-n-lok ii pages 189-195 .156 mate-n-lok pages 203-204 various technical documents are available for your use: product specifications describe technical performance characteristics and verification tests. they are intended for the design, component and quality engineer. 108-1000 commercial mate-n-lok connectors 108-1022 (mr) miniature rectangular connectors 108-1031 universal mate-n-lok connectors 108-1031-1 splash proof seal, universal mate-n-lok connectors 108-1032 .140 diameter mate-n-lok pin and socket connectors 108-1037 .062 commercial pin and socket connectors 108-1037-1 .062 commercial pin and socket contacts 108-1038 .093 commercial pin and socket connector 108-1053 universal mate-n-lok printed circuit board headers 108-1077 commercial mate-n-lok printed circuit board headers 108-1078 (mr) miniature rectangular printed circuit board headers 108-1090 universal mate-n-lok ii connectors 108-1542 mini-universal mate-n-lok connectors 108-1542-2 splash proof seals for mini-universal mate-n-lok connectors 108-1543 mini-universal mate-n-lok headers 108-1594 universal mate-n-lok headers with high current contacts 108-1693 mini-universal mate-n-lok ii connectors 108-1694 mini-universal mate-n-lok ii headers 108-1699 amp-duac headers 108-1836 micro mate-n-lok 3 mm connectors 108-2069 universal mate-n-lok circular connector 108-5138 mini-universal mate-n-lok connectors (ul 94v-0) 108-5151 mini-universal mate-n-lok connectors (ul 94v-2) 108-5155 commercial mate-n-lok pin header assembly 108-5222 universal mate-n-lok headers with action pin contacts 108-5410 power double lock (pdl) connectors 108-5439 power double lock (pdl) connectors (smt) 108-5459 2.5 mm signal double lock (sdl) connectors 108-5699 5.0 mm power key connectors (pkc) 108-5810 grace inertia connectors (gic) 3.5 108-8002 .156 diameter mate-n-lok connectors 108-19099 amp-duac receptacles 108-49000 commercial mate-n-lok idc insulation displacement connectors application specifications describe requirements for using the product in its intended appli- cation and/or crimping information. they are intended for the packaging and design engineer and the machine setup person. 114-1007 .140 diameter mate-n-lok contacts 114-1010 universal mate-n-lok connectors 114-1012 commercial mate-n-lok contacts 114-1013 .062 commercial pin and socket connectors 114-1014 (mr) miniature rectangular contacts 114-1043 universal mate-n-lok ii connectors (housings, contacts and strain reliefs) 114-1109 .156 diameter mate-n-lok connectors 114-1111 mini-universal mate-n-lok 2 connectors 114-5175 power double lock (pdl) connectors 114-5203 2.5 mm signal double lock (sdl) connectors 114-5292 5.0 mm power key connectors (pkc) 114-5306 grace inertia connectors (gic) 3.5 114-6067 amp-duac crimping contacts 114-13000 micro mate-n-lok 3 mm connecto rs
206 catalog 82181 dimensions are in inches and dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 4-08 millimeters unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 technical documents (continued) amp soft shell pin and socket connectors technical documents 114-13089 mini-universal mate-n-lok sealed connectors 114-16017 mini-universal mate-n-lok connectors 114-19048 amp-duac receptacles (use of) 114-49000 .093 commercial pin and socket connectors 114-49001 commercial mate-n-lok idc insulation displacement connectors instruction sheets provide instructions for assembling or applying the product. they are in- tended for the manufacturing assembler or operator. 408-3186 terminating head (pn 231894-1) (commercial mate-n-lok idc connector) 408-3200 universal mate-n-lok ii connectors (housings, contacts and accessories) 408-3231 (mr) miniature rectangular connectors (pin housing, socket housing, contacts, and accessories) 408-3234 mini-universal mate-n-lok connectors 408-3320 universal mate-n-lok strain relief assembly and keying plug 408-3392 universal mate-n-lok splash proof seals 408-3393 mini-universal mate-n-lok 2 connectors 408-4118 contact extraction tool (pn 189727-1) 408-4322 contact extraction tools [pn 691458-1 (pins) and 691458-2 (sockets)] 408-4370 contact extraction tool (pn 318831-1) 408-4371 contact extraction tool (pn 318851-1) 408-4375 contact extraction tool (pn 318837-1) 408-4378 extraction tool (pn 318845-1) 408-6790 hand tool handle (pn 58074-1) 408-7158 contact extraction tools [pn 1-305183-1 (pins) and 1-305183-2 (sockets)] 408-7166 commercial mate-n-lok panel mount connector 408-7200 commercial mate-n-lok free-hanging connector 408-7201 commercial mate-n-lok detent engagement connectors, 2 and 3 circuit 408-7209 commercial mate-n-lok commoning tabs 408-7211 pin and socket extraction tool (pn 465644-1) 408-7215 commercial mate-n-lok single circuit connector 408-7300 mate-n-lok contact and housing selection charts 408-7347 contact insertion tool (pn 91002-1) 408-7582 commercial mate-n-lok keying plug 408-7714 universal mate-n-lok connectors 408-7763 power unit (pn 91112-2) 408-7984 contact insertion tool (pn 455830-1) 408-9330 head (pn 231920-2) (used with arbor tool pn 91085-2) 408-9436 latch disengaging tool (pn 58382-1) 408-9570 contact extraction tool (pn 455822-2) 408-10003 contact retention test tool (pn 1586700-1) 408-10017 universal mate-n-lok sealed bulkhead connectors 411-5105 mini-universal mate-n-lok connectors 411-5638 power double lock (pdl) connectors application specifications (continued)
207 catalog 82181 dimensions are in inches and dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 4-08 millimeters unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 application tooling amp soft shell pin and socket connectors application tooling semiautomatic bench crimping machines that also strip the wire, and are therefore used for terminating jacketed cable. feature manual precision adjustment of crimp height, keyed strip blades for faster, more accurate setups, and an efficient scrap removal system. all adjustments can be made from the front of the machines without special tools. available with crimp quality monitoring. specifications width 14 [355] depth 18 [457] height 33 [838] without reel weight 150 lb [68 kg] electrical 120 vac, 50 or 60 hz, .5 a air 80-100 psi [5.52-6.90 bar], 3.5 scfm [0.00165 m 3 /s] wire range 32-14 awg [0.03-2 mm 2 ] for more information, request catalog 65004. amp-o-lectric model g terminating machines, 354500-1, -9, -11 amp-o-matic stripper-crimper machine, 854040-3, -4 semiautomatic machines semiautomatic bench machines for crimping reeled terminals and contacts, featuring a quiet and reliable direct motor drive, microprocessor controls for ease of setup and operation, and guarding and lighting designed for operator conven- ience and safety. all models are equipped with either manual or automatic precision adjustment of crimp height. machine-mounted sensors are available for crimp quality monitoring using conventional miniature-style applicators. specifications width 18.7-25.3 [475-643] depend- ing on applicator type depth 21.5-28.1 [546-713] depend- ing on applicator type height 20 [508] weight 240 lb [110 kg] electrical 120 or 220 vac, 50 or 60 hz air 90-110 psi [6.21-7.59 bar], 6 scfm [0.00282 m 3 /s] when required with air-feed applicators wire range 26-10 awg [0.12-6 mm 2 ] solid or stranded, depending on product applied for more information, request catalog 65828 , catalog 82275 [crimp quality monitor (cqm)]. crimp quality monitor this system measures the crimp height of each termination as it is made. it also evaluates the quality of each crimp. if a crimp is questionable, the monitor alerts the operator with both visual and audible alarms. it also features ports for printing and networking. for use with amp-o-lectric model g and amp-o-matic stripper- crimper machines, the monitor is mounted to the machine. for use with ampomator cls iv+ machines, it is integrated into the machines operating system, with the displays appearing on the machines touch screen. for more information, request catalog 82275. note: this listing is for reference purposes only. to obtain part numbers for specific applications call technical support. as value oriented terminators, the amp 3k/40 and amp 5k/40 are designed for customers that require the increased output and quality of a semi- automatic machine at a com- petitive price. by incorporating the most commonly requested features as standard and offering a long list of optional equipment, these terminators offer flexibility to meet the specific needs of various applications at the lowest possible cost. amp 3k/40 and amp 5k/40 terminators the combination of the stripping module with the amp-o-lectric model g terminator or the amp 3k/40, 5k/40 provides an economical, proficient method of stripping wire and crimping terminals on the same machine. wires are stripped moments before crimping, meaning there is virtually no chance of damag- ing wire conductors during handling or storage. once the wire is fed into the start sensor the stripping module does the rest, improving placement accuracy. for more information, request catalog 1309085. optional stripping module for the amp 3k/40, amp 5k/40 and amp-o-lectric model g terminators
208 catalog 82181 dimensions are in inches and dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 4-08 millimeters unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 application tooling (continued) amp soft shell pin and socket connectors application tooling automatic machines edge electronic applicator counter fully-automatic machines that measure, cut, strip and terminate single leads. microprocessor-controlled, and programmed and operated using an easy-to-follow, menu- driven touchscreen. features include direct-drive terminating units with precision crimp height adjustment, fully programmable setups, wire runout and splice detection, and motorized pre-feed with wire straightener. crimp quality monitoring is also available. specifications width 159 [4 039] depth 68 [1 730] height 90 [2 285] min., with 24 [610] dia. reel weight 2 000 lb [907 kg] electrical 220 vac, 50 or 60 hz, 1 ? , 20 a with neutral and ground air 90 psi [6.21 bar], 15 scfm [0.00708 m 3 /s] sustained wire range 26-10 awg [0.12-6 mm 2 ] stranded, 26-16 awg [0.12-1.4 mm 2 ] solid lead lengths 3-90 [76.2-2 286], 90-1 000 [2 286-25 400] with long lead conveyors for more information, request catalog 124324. ampomator cls iv+ lead-making machines, 356500-1, -2 the ampomator system iii leadmaker is designed for the demands of low-volume/ high-mix manufacturing and precision quality. this lead- maker combines the best wire processing capabilities with new technologies in terminal feeding and machine set-up found in the system iii applicator to offer significant advantages for higher through- put and efficiencies. request catalog 1654956-5. ampomator system iii leadmaker the new, versatile edge appli- cator counter tracks wearable tool usage for the most effec- tive maintenance planning. the completely electronic counter, with clear lcd display, indi- cates cycles since installation. by performing maintenance at measured intervals with pre-set limits, operators avoid break- downs and rejects caused by tool wear or mis-adjustment. for more information, request catalog 1773385. the system iii applicator introduces several new technologies into the applicator including a precision servo- electric motorized feeding system, a built-in data module for storing terminal crimp and set-up information, a precision fit round ram, and a newly designed terminal depressor. it still utilizes the proven quality of the hd-m crimper and anvil tooling. system iii applicator
209 catalog 82181 dimensions are in inches and dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 4-08 millimeters unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 application tooling (continued) amp soft shell pin and socket connectors application tooling applicator styles applicator and hand tool selection guide related product data contacts 2.5 mm signal double lock (sdl) page 12 micro mate-n-lok 3 mm page 22 grace inertia connectors (gic) 3.5 page 50 .062 commercial pin and socket page 55 power double lock (pdl) page 61 mini universal mate-n-lok page 84 mini universal mate-n-lok 2 pages 100-101 (mr) miniature rectangular page 112 val-u-lok connector system page 120 amp-duac pages 126-127 5.0 mm power key connectors (pkc) page 137 .093 commercial pin and socket page 145 commercial mate-n-lok pages 155-156 .140 mate-n-lok page 166 universal mate-n-lok pages 172-173 universal mate-n-lok ii page 192 .156 mate-n-lok page 203 stripper-crimper (sca) applicators end- and side-feed heavy- duty miniature (hdm) applicators crimp quality monitor (cqm) applicators for use with amp-o-matic stripper-crimper machines terminate a wide variety of open-barrel products quickly interchangeable to run different products easily repaired simple dial-in settings to handle similar products and various wire sizes cqm applicators are available handle a wide variety of products used with both semi- and fully-automatic machines quickly interchangeable to run different products easily repaired simple dial-in settings to handle similar products and various wire sizes same basic features as regular hdm and sca applicators recommended for use with machines featuring manual or automatic precision-adjust use two built-in sensors to provide the crimp quality monitor with data to measure crimp height, and evaluate the quality of each crimp note: this listing is for reference purposes only. to obtain part numbers for specific applications call technical support. mechanical hand tools certi-crimp ii straight action hand tools (saht) 91501-1, 91502-1 premium grade hand tools. feature ratchet control to provide complete crimp cycle. die sets close in a straight line. include a con- tact locator and wire stop, plus an insulation crimp adjustment lever, when applicable. approximate weight 1.3 lb [0.59 kg] for more information, request catalog 65780. applicators hand tools density product line abc de 2.5 mm signal double lock (sdl) *** x- micro mate-n-lok 3 mm xxx x- grace inertia connectors (gic) 3.5 *** x- .062 commercial pin and socket xxx -x high power double lock (pdl) *** x- mini-universal mate-n-lok xxx xx sealed mini-universal mate-n-lok xxx x- mini-universal mate-n-lok 2 xxx xx (mr) miniature rectangular xxx x- val-u-lok connector system x-- -x amp-duac xx- x- 5.0 mm power key connectors (pkc) *** x- .093 commercial pin and socket xxx -x standard commercial mate-n-lok xxx xx .140 mate-n-lok xxx x- universal mate-n-lok xxx xx universal mate-n-lok ii xxx xx .156 mate-n-lok x-- x- a heavy duty miniature (hdm) applicators b stripper-crimper applicators (sca) c crimp quality monitor (cqm) applicators d certi-crimp hand tool e pro-crimper iii commercial hand tool * contact the tooling assistance center (tac) at 1-800-722-1111 for applicator part numbers.
210 catalog 82181 dimensions are in inches and dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 4-08 millimeters unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 application tooling (continued) amp soft shell pin and socket connectors application tooling hand tools related product data contacts 2.5 mm signal double lock (sdl) page 12 micro mate-n-lok 3 mm page 22 grace inertia connectors (gic) 3.5 page 50 .062 commercial pin and socket page 55 power double lock (pdl) page 61 mini universal mate-n-lok page 86 mini universal mate-n-lok 2 pages 100-101 (mr) miniature rectangular page 112 val-u-lok connector system page 120 amp-duac pages 126-127 5.0 mm power key connectors (pkc) page 137 .093 commercial pin and socket page 145 commercial mate-n-lok pages 155-156 .140 mate-n-lok page 166 universal mate-n-lok pages 172-173 universal mate-n-lok ii page 192 .156 mate-n-lok page 203 features certi-crimp hand tool pro-crimper iii hand tool field repair/prototyping x x oem applications/low volume production x ratchet control xx brush/bellmouth control xx precision crimp height control xx little/no operator training x insulation adjustment x repairable x certi-crimp ii hand tool pro-crimper iii hand tool catalog 65780 catalog 82276 certi-crimp hand tool pro-crimper iii hand tool density product line part number instruction sheet part number instruction sheet 2.5 mm signal double lock (sdl) 234603-1 411-5735 234604-1 411-5736 micro mate-n-lok 3 mm 91501-1 408-8547 91502-1 408-8547 grace inertia connectors (gic) 3.5 1596277-1 411-78101 .062 commercial pin & socket 90870-1 408-9965 90869-1 408-9964 power double lock (pdl) 91567-1 408-8547 91569-1 408-8547 mini-universal mate-n-lok 91529-1 408-8547 90758-1 408-9938 high and 91522-1 408-8547 90759-1 408-9962 sealed mini-universal mate-n-lok 91594-1 408-8547 90760-1 408-9963 90717-2 408-4443 91529-1 408-8547 mini-universal mate-n-lok 2 91522-1 408-8547 91594-1 408-8547 90717-2 408-4443 (mr) miniature rectangular 91534-1 408-8547 58514-1 408-9973 91526-1 408-8547 58514-1 408-9973 val-u-lok connector system 91387-1 408-8917 91388-1 408-8918 amp-duac 90714-1 408-4385 734202-2 5.0 mm power key connectors (pkc) .093 commercial pin & socket 90872-1 408-9967 90871-1 408-9966 91515-1 408-8547 commercial mate-n-lok 91512-1 408-8547 90574-1 408-9886 91504-1 408-8547 90575-1 408-9887 91552-1 408-8547 .140 mate-n-lok 69710-1 1 408-2095 58373-1 2 408-9442 standard 58374-1 2 408-9442 58439-1 408-9591 91510-1 408-8547 90548-1 408-9885 universal mate-n-lok 91500-1 408-8547 90546-1 408-9883 and 91508-1 408-8547 90547-1 408-9884 universal mate-n-lok ii 91506-1 408-8547 90547-1 408-9884 69710-1 1 408-2095 58380-1 2 408-9433 58380-2 2 408-9433 .156 mate-n-lok 58631-1 408-4341 58632-1 408-4340 1 hand tool requires die set. 2 die set. note: this listing is for reference purposes only. to obtain part numbers for specific applications call technical support.
211 catalog 82181 dimensions are in inches and dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 4-08 millimeters unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 applicator options amp soft shell pin and socket connectors applicator options strip form contact heavy-duty miniature applicator part numbers part number used on bench top terminators used on automatic leadmaking used on pin socket amp-o-lectric amp-o-lectric equipment ( ampomator cls amp-o-matic model k machine model g machine machine with t or g terminators) stripper-crimper machine 917764-1 917683-1 ** * * 917765-1 917684-1 ** * * 1-794608-0 1-794608-1 1385194-2 1385194-3 1385194-1 1-794608-2 1-794609-0 1-794609-1 1385377-2 1385377-3 1385377-1 1-794609-2 794606-1 1-794606-1 680893-2 680893-3 680893-1 1-794606-2 794607-1 1-794607-1 680894-2 680894-3 680894-1 1-794607-2 1565080-1 1565079-1 ** * * 1612335-1 1612334-1 ** * * 640391-1 640392-1 640391-5 640392-5 466686-2 466686-3 466686-1 466955-1 640392-2 794046-1 350629-1 350628-1 350628-2 350629-5 350628-5 687996-2 687996-3 687996-1 350628-6 794103-1 177916-1 177914-1 ** * * 177914-2? ** * * 177917-1 177915-1 ** * * 177915-2? ** * * ? high contact pressure type. 770835-1 770834-1 1-770835-0 1-770834-0 567418-2 567418-3 567418-1 770901-1 770902-1 1-770901-0 1-770902-0 567066-4 567066-5 567066-3 466990-2 770903-1 770904-1 1-770903-0 1-770904-0 567067-2 567067-3 567067-1 466986-1 171636-1 171637-1 171637-3 680582 567251-1 680582 567902-1 794216-1 794217-1 1-794216-0 1-794217-0 567418-2 567418-3 567418-1 794218-1 794219-1 1-794218-0 1-794219-0 567066-4 567066-5 567066-3 466990-2 794220-1 794221-1 1-794220-0 1-794221-0 680854-2 680854-3 680854-1 466986-1 794222-1 794223-1 1-794222-0 1-794223-0 680582-2 680582-3 567902-1 350968-1 794000-1 350968-2 794000-2 466352-2 466352-3 466352-1 350967-1 641294-1 350967-2 641294-2 466351-2 466351-4 466351-1 466913-1 350969-1 350969-2 466351-2 466351-4 466351-1 466913-1 2.5 mm signal double lock (sdl) contacts grace inertia connectors (gic) 3.5 power double lock (pdl) micro mate-n-lok 3 mm connector system .062 commercial pin and socket contacts mini-universal mate-n-lok 2 contacts mini-universal mate-n-lok contacts (mr) miniature rectangular contacts note: stripper crimper (sca) and crimp quality monitor applicators may be available. call technical support for part numbers. * contact the tooling assistance center (tac) at 1-800-722-1111 for applicator part numbers. note: all part numbers are rohs compliant.
212 catalog 82181 dimensions are in inches and dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 4-08 millimeters unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 applicator options (continued) amp soft shell pin and socket connectors applicator options strip form contact heavy-duty miniature applicator part numbers part number used on bench top terminators used on automatic leadmaking used on pin socket amp-o-lectric amp-o-lectric equipment ( ampomator cls amp-o-matic model k machine model g machine machine with t or g terminators) stripper-crimper machine 794955-1 794956-1 794955-2 794956-2 1385817-2 1385817-3 1385817-1 794955-3 794956-3 794955-4 794956-4 794957-1 794958-1 794957-2 794958-2 1385448-2 1385448-3 1385448-1 794957-3 794958-3 794957-4 794958-4 794576-1 106529-2 680308-2 680308-3 567959-1 1-794138-3 794578-1 106528-2 680307-2 680307-3 567960-1 1-794139-3 1-794140-3 680350-2 680350-3 794418-1 1376347-1 ** * * 1376348-1 ** * * 350418-1 350417-1 350417-3 466656-2 466656-3 466656-1 466922-1 350418-5 350417-5 350416-1 350415-1 466878-2 466878-3 466878-1 466959-1 350416-5 350415-5 770530-1 770529-1 567337-4 567337-6 567337-3 770385-1 770383-1 567273-2 567273-4 567273-3 350079-1 350078-1 350079-4 350078-4 466426-2 466426-3 466426-1 350079-5 350078-5 61116-1 61314-1 61116-4 61314-4 61116-5 61314-5 466320-2 466320-4 466320-1 466917-1 61116-6 61314-6 61116-7 61314-7 61118-1 61117-1 61118-4 61117-4 61118-5 61117-5 687763-2 687763-6 687763-1 466920-1 61118-6 61117-6 61118-7 61117-7 350558-1 350557-1 350558-4 350557-4 687898-2 687898-4 687898-1 61527-2 466320-2 466320-4 466320-1 466917-1 61627-1 61626-1 61627-2 61626-2 567306-2 567306-3 567306-1 350201-1 350200-1 350201-2 350200-2 567309-2 567309-3 587309-1 350924-1 350925-1 350924-6 350925-6 466616-2 466616-3 350561-1 350851-1 350570-1 350561-2 350851-2 350570-2 350561-7 350851-7 466320-2 466320-4 466320-1 466917-1 350570-7 350561-3 350570-3 350570-6 note: stripper crimper (sca) and crimp quality monitor applicators may be available. call technical support for part numbers. * contact the tooling assistance center (tac) at 1-800-722-1111 for applicator part numbers. note: all part numbers are rohs compliant. 5.0 mm power key connectors (pkc) .093 commercial pin and socket contacts commercial mate-n-lok contacts .140 mate-n-lok contacts universal mate-n-lok contacts amp-duac val-u-lok connector system
213 catalog 82181 dimensions are in inches and dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 4-08 millimeters unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 applicator options (continued) amp soft shell pin and socket connectors applicator options .156 mate-n-lok contacts 350218-1 350536-1 350218-2 350536-2 350218-7 350536-7 687763-2 687763-6 687763-1 466920-1 350218-3 350536-3 350218-6 350536-6 350538-1 350537-1 350538-2 350537-2 350538-7 350537-7 687926-2 687926-6 687926-1 466989-1 350538-3 350537-3 350538-6 350537-6 350873-1 350874-1 350873-3 350874-3 466588-2 466588-3 466588-1 350922-3 350923-3 350922-6 350923-6 466597-2 466597-3 466597-1 350922-4 350923-4 350699-1 350699-2 466320-2 466320-4 466320-1 466917-1 350699-7 350687-1 350687-2 687763-2 687763-6 687763-1 466920-1 350687-7 350700-1 350700-2 687926-2 687926-6 687926-1 466989-1 350700-7 770210-1 567216-2 567216-3 567216-1 350654-1 687763-2 687763-6 687763-1 466920-1 770234-3 466597-2 466597-3 466597-1 770011-6 770012-6 567252-4 567252-1 770009-1 1-770009-0 770010-3 567214-4 567214-1 567914-1 1-770010-0 770007-1 1-770007-0 770008-3 567213-4 567213-1 567913-1 1-770008-0 770005-1 1-770005-0 770006-3 567212-4 567212-1 1-770005-1 1-770006-0 770003-3 770004-3 1-770003-0 1-770004-0 567211-4 567211-1 770193-1 1-770193-0 567213-4 567213-1 567913-1 770194-1 1-770194-0 567212-4 567212-1 61086-1 61085-1 466462-1 466462-3 466462-1 61234-1 61233-1 687765-2 687765-2 strip form contact heavy-duty miniature applicator part numbers part number used on bench top terminators used on automatic leadmaking used on pin socket amp-o-lectric amp-o-lectric equipment ( ampomator cls amp-o-matic model k machine model g machine machine with t or g terminators) stripper-crimper machine note: stripper crimper (sca) and crimp quality monitor applicators may be available. call technical support for part numbers. * contact the tooling assistance center (tac) at 1-800-722-1111 for applicator part numbers. note: all part numbers are rohs compliant. universal mate-n-lok ii contacts universal mate-n-lok contacts (continued)
214 catalog 82181 dimensions are in inches and dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 4-08 millimeters unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 product feature comparisons amp soft shell pin and socket connectors product feature comparisons 2.5 mm micro grace .062 power mini- sealed mini- (mr) val-u-lok high density signal mate-n-lok inertia commercial double universal mini- universal miniature connector amp- double 3 mm connectors pin & lock mate-n-lok universal mate-n-lok 2 rectangular system duac lock (sdl) (gic) 3.5 socket (pdl) mate-n-lok wire aw g maximum 20 20 18 18 16 16 18 16 18 18 18 minimum 26 30 26 30 26 30 26 30 26 26 26 current rating 10 awg wire 14 awg wire 16 awg wire 14 18 awg wire ** 7 17 9 9 10.5 699 20 awg wire 3 max. operating voltage 50 250 300 250 300 600 600 600 250 600 600 (ac or dc) flammability rating ul 94v-0 yes yes yes no yes yes yes yes yes yes yes ul 94v-2 no no no yes no yes* no yes no yes yes approvals ul yes yes yes yes yes yes yes submitted yes yes yes csa yes yes yes yes yes yes yes submitted yes yes yes vde yes yes no yes yes yes submitted no no contact material brass no yes yes yes yes yes yes yes no yes phos. bronze yes yes no yes no yes yes no yes yes yes plating finish tin plating yes yes yes yes yes yes yes yes yes yes yes gold plating no yes no yes no yes yes yes yes yes yes .156 [3.96] centerline spacing .098 .118 .137 .145 256 [6.50] .163 .163 .163 .165 .165 .165 [2.50] [3.00] [3.50] [3.68] .312 [7.92] [4.14] [4.14] [4.14] [4.20] [4.20] [4.20] .512 [13.00] housings panel mount no yes no yes yes yes yes no yes yes yes free-hanging yes yes yes yes yes yes no yes yes yes yes secondary locking latches yes no yes no yes no no yes no yes yes contact position control yes no no no no no no yes no no yes in-line config. yes yes yes yes yes yes no yes yes yes yes dual row config. no yes yes no yes yes yes yes no yes yes matrix config. no no no yes yes yes no yes yes no no accessories strain relief no no yes no yes yes no no yes no yes keying plug no no no no no yes yes yes yes no no seals no no no no no yes yes no no no no headers vertical yes yes no no yes yes yes mini-universal yes yes yes mate-n-lok blindmate no no no no no yes yes mini-universal no yes no mate-n-lok right-angle planned yes no no no yes yes mini-universal no yes yes mate-n-lok positions minimum 2221112 2 222 maximum 13 24 69 12 24 10 24 36 24 24 * wire-to-wire only. ** 5 a on 20 awg*
215 catalog 82181 dimensions are in inches and dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 4-08 millimeters unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 product feature comparisons (continued) amp soft shell pin and socket connectors product feature comparisons 5.0 mm .093 commercial .140 universal universal .156 standard density power key commercial mate-n-lok mate-n-lok mate-n-lok mate-n-lok ii mate-n-lok connectors (pkc) pin & socket wire awg maximum 16 14 14 10 10 10 10 minimum 24 24 30 20 30 30 20 current rating 10 awg wire 28 32.5 14 awg wire 19 13 15 19 16 awg wire 10 18 awg wire 20 awg wire max. operating voltage (ac or dc) 300 250 250 600 600 600 600 flammability rating ul 94v-0 yes no yes no yes yes no ul 94v-2 no yes yes yes yes no yes approvals ul yes yes yes yes yes yes yes csa yes yes yes yes yes yes no vde no no no no yes yes no contact material brass yes yes yes yes yes yes yes phos. bronze no yes yes yes yes yes no plating finish tin plating yes yes yes yes yes yes yes gold plating no yes yes no yes yes no .198 [5.03] .200 [5.08] centerline spacing .197 [5.00] .250 [6.35] .240 [6.10] x .202 [5.13] .240 [6.10] .250 [6.35] .250 [6.35] .390 [9.91] .248 [6.30] .195 [4.95] x .360 [9.14] housings panel mount no yes yes yes yes yes yes free-hanging no yes yes yes yes yes yes secondary locking latches yes no no yes no yes yes contact position control no no no no no yes no in-line config. yes yes yes yes yes yes yes dual row config. yes no yes no no no no matrix config. no yes yes yes yes yes no accessories strain relief yes no no no yes universal no mate-n-lok keying plug no no yes no yes yes no seals no no no no yes no no headers vertical yes no yes no yes universal no mate-n-lok blindmate no no no no no no no right-angle no no yes no yes universal no mate-n-lok positions minimum 2112123 maximum 6 15 16 9 15 15 4 * wire-to-wire only. ** 5 a on 20 awg*
216 catalog 82181 dimensions are in inches and dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 4-08 millimeters unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 non-compliant to rohs compliant part number cross reference 350827-2 350827-4 350828-2 350828-4 350829-2 350829-4 350830-2 350830-4 350832-2 350832-4 350833-2 350833-4 350834-2 350834-4 350835-2 350835-4 350836-2 350836-4 350837-2 350837-4 2-350942-0 3-350942-0 2-350943-0 3-350943-0 2-350944-0 3-350944-0 2-350945-0 3-350945-0 350988-3 350988-5 350989-3 350989-5 350990-3 350990-5 350991-3 350991-5 1-380935-0 2-380935-0 1-380936-0 2-380936-0 1-380937-0 2-380937-0 2-380991-0 2-1586544-0 2-380999-0 2-1586546-0 640466-2 640466-3 640467-2 640467-3 640497-2 2-640497-2 640497-4 2-640497-4 640498-2 2-640498-2 640498-4 2-640498-4 640499-2 2-640499-2 640499-4 2-640499-4 640500-2 2-640500-2 640500-4 2-640500-4 640501-2 2-640501-2 640501-4 2-640501-4 640502-2 2-640502-2 640502-4 2-640502-4 640503-2 2-640503-2 640503-4 2-640503-4 640504-2 2-640504-2 640504-4 2-640504-4 640505-2 2-640505-2 640505-4 2-640505-4 640506-2 2-640506-2 640506-4 2-640506-4 640583-2 640583-3 640584-2 640584-3 640900-2 640900-3 640901-2 640901-3 641831-2 641831-3 641832-2 641832-3 641963-2 641963-3 641964-2 641964-3 641970-2 641970-3 641971-2 641971-3 641972-2 641972-3 641974-2 641974-3 641976-2 641976-4 643228-2 3-643228-0 643230-2 3-643230-0 643232-2 3-643232-0 non-compliant rohs compliant part number part number 350209-2 1586512-2 350210-2 1586514-2 350211-2 1586515-2 350211-3 1586515-3 350212-2 1586518-2 350213-2 1586520-2 350214-2 1586522-2 350220-2 1586524-2 1-350375-0 2-350375-0 1-350376-0 2-350376-0 1-350377-0 2-350377-0 1-350378-1 2-350378-1 1-350379-1 2-350379-1 1-350380-1 2-350380-1 350424-2 1586525-2 350425-2 1586526-2 350426-2 1586528-2 350428-2 350428-4 350429-2 350429-4 350430-2 350430-4 350431-2 350431-4 350432-2 350432-4 350433-2 350433-4 350434-2 350434-4 350539-2 1586530-2 350541-2 1586532-2 350543-2 1586534-2 350544-2 1586536-2 350582-2 350582-4 350583-2 350583-4 350584-2 350584-4 350585-2 350585-4 350586-2 350586-4 350587-2 350587-4 350588-2 350588-4 350641-2 1586539-2 350711-2 350711-4 350712-2 350712-4 350713-2 350713-4 350714-2 350714-4 350714-3 350714-5 350732-2 350732-4 350737-2 350737-4 350738-2 350738-4 350742-2 350742-4 350759-3 350759-5 350760-3 350760-5 350761-3 350761-5 350762-3 350762-5 350763-3 350763-5 350764-3 350764-5 350765-3 350765-5 350786-2 350786-3 350787-2 350787-3 350789-2 350789-3 350790-2 350790-3 350792-2 350792-3 350793-2 350793-3 350824-2 350824-4 350825-2 350825-4 350826-2 350826-4 non-compliant rohs compliant part number part number 643234-2 3-643234-0 643236-2 3-643236-0 643410-2 643410-3 643412-2 643412-3 643414-2 643414-3 643424-2 643424-3 643426-2 643426-3 770003-4 1-770003-0 770004-4 1-770004-0 770005-2 1-770005-0 770005-4 1-770005-1 770006-4 1-770006-0 770007-2 1-770007-0 770008-4 1-770008-0 770010-4 1-770010-0 770166-1 1-770166-0 770166-2 1-770166-1 770170-1 1-770170-0 770170-2 1-770170-1 770174-1 1-770174-0 770174-2 1-770174-1 770178-1 1-770178-0 770178-2 1-770178-1 770182-1 1-770182-0 770182-2 1-770182-1 770186-1 1-770186-0 770186-2 1-770186-1 770190-1 1-770190-0 770190-2 1-770190-1 770193-2 1-770193-0 770194-2 1-770194-0 770246-4 1-770246-0 770247-4 1-770247-0 770248-2 1-770248-0 770249-4 1-770249-0 770250-2 1-770250-0 770251-4 1-770251-0 770252-2 1-770252-0 770254-2 1-770254-0 770255-2 1-770255-0 770262-2 770262-3 770328-1 1586627-1 1-770328-1 1-1586627-1 770621-1 1-770621-0 770621-2 1-770621-1 770743-1 1-770743-0 770743-2 1-770743-1 770834-3 1-770834-0 770834-6 1-770834-1 770835-3 1-770835-0 770858-1 1-770858-0 770858-2 1-770858-1 770859-1 1-770859-0 770859-2 1-770859-1 770872-1 1-770872-0 770872-2 1-770872-1 770873-1 1-770873-0 770873-2 1-770873-1 770874-2 1-770874-1 770875-1 1-770875-0 770875-2 1-770875-1 non-compliant rohs compliant part number part number 770876-1 1-770876-0 770876-2 1-770876-1 770901-3 1-770901-0 770902-3 1-770902-0 770902-6 1-770902-1 770903-3 1-770903-0 770903-6 1-770903-1 770904-3 1-770904-0 770904-6 1-770904-1 770966-1 1-770966-0 770966-2 1-770966-1 770967-1 1-770967-0 770967-2 1-770967-1 770968-1 1-770968-0 770968-2 1-770968-1 770969-1 1-770969-0 770969-2 1-770969-1 770970-1 1-770970-0 770970-2 1-770970-1 770971-1 1-770971-0 770971-2 1-770971-1 770972-1 1-770972-0 770972-2 1-770972-1 770973-1 1-770973-0 770973-2 1-770973-1 770974-1 1-770974-0 770974-2 1-770974-1 770985-3 1-770985-0 770986-3 1-770986-0 770987-3 1-770987-0 770988-3 1-770988-0 794040-1 1-794040-0 794040-2 1-794040-1 794058-3 1-794058-0 794059-3 1-794059-0 794065-1 1-794065-0 794065-2 1-794065-1 794066-1 1-794066-0 794066-2 1-794066-1 794067-1 1-794067-0 794067-2 1-794067-1 794068-1 1-794068-0 794068-2 1-794068-1 794069-1 1-794069-0 794069-2 1-794069-1 794070-1 1-794070-0 794070-2 1-794070-1 794071-1 1-794071-0 794071-2 1-794071-1 794072-1 1-794072-0 794072-2 1-794072-1 794073-1 1-794073-0 794073-2 1-794073-1 794074-1 1-794074-0 794074-2 1-794074-1 794075-2 1-794075-1 794076-1 1-794076-0 794076-2 1-794076-1 794077-1 1-794077-0 794077-2 1-794077-1 794078-1 1-794078-0 non-compliant rohs compliant part number part number amp soft shell pin and socket connectors non-compliant to rohs compliant part number cross reference
217 catalog 82181 dimensions are in inches and dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 4-08 millimeters unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 non-compliant to rohs compliant part number cross reference (continued) 794078-2 1-794078-1 794079-1 1-794079-0 794079-2 1-794079-1 794105-1 1-794105-0 794105-2 1-794105-1 794106-1 1-794106-0 794106-2 1-794106-1 794107-1 1-794107-0 794107-2 1-794107-1 794108-1 1-794108-0 794108-2 1-794108-1 794126-1 1-794126-0 794130-2 1-794130-1 794136-3 1-794136-1 794137-3 1-794137-1 794138-3 1-794138-3 794139-3 1-794139-3 794140-3 1-794140-3 794141-3 1-794141-3 794142-3 1-794142-3 794143-3 1-794143-3 794181-1 1-794181-1 794181-2 1-794181-2 794216-3 1-794216-0 794217-3 1-794217-0 794218-3 1-794218-0 794219-3 1-794219-0 794220-3 1-794220-0 794221-3 1-794221-0 794222-3 1-794222-0 794223-3 1-794223-0 794224-3 1-794224-0 794225-3 1-794225-0 794226-3 1-794226-0 794227-3 1-794227-0 794228-3 1-794228-0 794229-3 1-794229-0 794230-3 1-794230-0 794231-3 1-794231-0 794302-1 1-794302-1 794302-2 1-794302-2 794303-1 1-794303-1 794303-2 1-794303-2 794304-1 1-794304-1 794304-2 1-794304-2 794305-1 1-794305-1 794305-2 1-794305-2 794306-1 1-794306-1 794306-2 1-794306-2 794307-1 1-794307-1 794307-2 1-794307-2 794308-1 1-794308-1 794308-2 1-794308-2 794309-1 1-794309-1 794309-2 1-794309-2 794310-1 1-794310-1 794310-2 1-794310-2 794311-1 1-794311-1 794311-2 1-794311-2 794312-1 1-794312-1 794312-2 1-794312-2 non-compliant rohs compliant part number part number 794313-1 794313-3 794313-2 794313-4 794325-1 1-794325-0 794326-2 1-794326-1 794327-1 1-794327-0 794327-2 1-794327-1 794328-1 1-794328-0 794330-2 1-794330-1 794349-1 1-794349-1 794349-2 1-794349-2 794350-1 1-794350-1 794350-2 1-794350-2 794351-1 1-794351-1 794351-2 1-794351-2 794352-1 1-794352-1 794352-2 1-794352-2 794353-1 1-794353-1 794353-2 1-794353-2 794354-1 1-794354-1 794354-2 1-794354-2 794355-1 1-794355-1 794355-2 1-794355-2 794356-1 1-794356-1 794356-2 1-794356-2 794357-1 1-794357-1 794357-2 1-794357-2 794358-1 1-794358-1 794358-2 1-794358-2 794359-1 1-794359-1 794359-2 1-794359-2 794360-1 1-794360-1 794360-2 1-794360-2 794374-1 1-794374-0 794374-2 1-794374-1 794406-3 1-794406-0 794407-3 1-794407-0 794415-1 1-794415-1 794415-2 1-794415-2 794429-1 1-794429-1 794429-2 1-794429-2 794448-1 1-794448-1 794449-1 1-794449-1 794453-1 1-794453-1 794453-2 1-794453-2 794454-1 1-794454-1 794454-2 1-794454-2 794455-1 1-794455-1 794455-2 1-794455-2 794466-1 1-794466-1 794466-2 1-794466-2 794467-1 1-794467-1 794467-2 1-794467-2 794468-1 1-794468-1 794468-2 1-794468-2 794469-1 1-794469-1 794469-2 1-794469-2 794470-1 1-794470-1 794470-2 1-794470-2 794471-1 1-794471-1 794471-2 1-794471-2 794472-1 1-794472-1 non-compliant rohs compliant part number part number 794472-2 1-794472-2 794484-1 1-794484-1 794484-2 1-794484-2 794485-1 1-794485-1 794485-2 1-794485-2 794486-1 1-794486-1 794486-2 1-794486-2 794487-1 1-794487-1 794487-2 1-794487-2 794488-1 1-794488-1 794488-2 1-794488-2 794489-1 1-794489-1 794489-2 1-794489-2 794490-1 1-794490-1 794490-2 1-794490-2 794491-1 1-794491-1 794491-2 1-794491-2 794492-1 1-794492-1 794492-2 1-794492-2 794493-1 1-794493-1 794493-2 1-794493-2 794494-1 1-794494-1 794494-2 1-794494-2 794507-1 1-794507-1 794508-1 1-794508-1 794509-1 1-794509-1 794510-1 1-794510-1 794511-1 1-794511-1 794512-1 1-794512-1 794513-1 1-794513-1 794514-1 1-794514-1 794515-1 1-794515-1 794516-1 1-794516-1 794526-1 1-794526-1 794527-1 1-794527-1 794528-1 1-794528-1 794529-1 1-794529-1 794530-1 1-794530-1 794531-1 1-794531-1 794532-1 1-794532-1 794533-1 1-794533-1 794534-1 1-794534-1 794540-1 1-794540-1 794540-2 1-794540-2 794543-1 1-794543-1 794543-2 1-794543-2 794576-2 794576-4 794578-2 794578-4 794588-1 1-794588-1 794589-1 1-794589-1 794590-1 1-794590-1 794606-2 1-794606-1 794606-3 1-794606-2 794607-2 1-794607-1 794607-3 1-794607-2 794608-1 1-794608-0 794608-2 1-794608-1 794608-3 1-794608-2 794609-1 1-794609-0 794609-2 1-794609-1 794609-3 1-794609-2 non-compliant rohs compliant part number part number 794610-2 1-794610-1 794610-3 1-794610-2 794611-2 1-794611-1 794611-3 1-794611-2 794612-1 1-794612-0 794612-2 1-794612-1 794612-3 1-794612-2 794613-1 1-794613-0 794613-2 1-794613-1 794613-3 1-794613-2 794618-2 3-794618-2 794618-4 3-794618-4 794618-6 3-794618-6 794618-8 3-794618-8 1-794618-0 4-794618-0 1-794618-2 4-794618-2 1-794618-4 4-794618-4 1-794618-6 4-794618-6 1-794618-8 4-794618-8 2-794618-0 5-794618-0 2-794618-2 5-794618-2 2-794618-4 5-794618-4 794619-2 3-794619-2 794619-4 3-794619-4 794619-6 3-794619-6 794619-8 3-794619-8 1-794619-0 4-794619-0 1-794619-2 4-794619-2 1-794619-4 4-794619-4 1-794619-6 4-794619-6 1-794619-8 4-794619-8 2-794619-0 5-794619-0 2-794619-2 5-794619-2 2-794619-4 5-794619-4 794620-2 3-794620-2 794620-4 3-794620-4 794620-6 3-794620-6 794620-8 3-794620-8 1-794620-0 4-794620-0 1-794620-2 4-794620-2 1-794620-4 4-794620-4 1-794620-6 4-794620-6 1-794620-8 4-794620-8 2-794620-0 5-794620-0 2-794620-2 5-794620-2 2-794620-4 5-794620-4 794621-2 3-794621-2 794621-4 3-794621-4 794621-6 3-794621-6 794621-8 3-794621-8 1-794621-0 4-794621-0 1-794621-2 4-794621-2 1-794621-4 4-794621-4 1-794621-6 4-794621-6 1-794621-8 4-794621-8 2-794621-0 5-794621-0 2-794621-2 5-794621-2 2-794621-4 5-794621-4 794622-2 3-794622-2 794622-4 3-794622-4 794622-6 3-794622-6 non-compliant rohs compliant part number part number amp soft shell pin and socket connectors non-compliant to rohs compliant part number cross reference
218 catalog 82181 dimensions are in inches and dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 4-08 millimeters unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 non-compliant to rohs compliant part number cross reference (continued) 1-794627-0 4-794627-0 1-794627-2 4-794627-2 1-794627-4 4-794627-4 1-794627-6 4-794627-6 1-794627-8 4-794627-8 2-794627-0 5-794627-0 2-794627-2 5-794627-2 2-794627-4 5-794627-4 794628-2 3-794628-2 794628-4 3-794628-4 794628-6 3-794628-6 794628-8 3-794628-8 1-794628-0 4-794628-0 1-794628-2 4-794628-2 1-794628-4 4-794628-4 1-794628-6 4-794628-6 1-794628-8 4-794628-8 2-794628-0 5-794628-0 2-794628-2 5-794628-2 2-794628-4 5-794628-4 794629-2 3-794629-2 794629-4 3-794629-4 794629-6 3-794629-6 794629-8 3-794629-8 1-794629-0 4-794629-0 1-794629-2 4-794629-2 1-794629-4 4-794629-4 1-794629-6 4-794629-6 1-794629-8 4-794629-8 2-794629-0 5-794629-0 2-794629-2 5-794629-2 2-794629-4 5-794629-4 794630-2 3-794630-2 794630-4 3-794630-4 794630-6 3-794630-6 794630-8 3-794630-8 1-794630-0 4-794630-0 1-794630-2 4-794630-2 1-794630-4 4-794630-4 1-794630-6 4-794630-6 1-794630-8 4-794630-8 2-794630-0 5-794630-0 2-794630-2 5-794630-2 2-794630-4 5-794630-4 794631-2 3-794631-2 794631-4 3-794631-4 794631-6 3-794631-6 794631-8 3-794631-8 1-794631-0 4-794631-0 1-794631-2 4-794631-2 1-794631-4 4-794631-4 1-794631-6 4-794631-6 1-794631-8 4-794631-8 2-794631-0 5-794631-0 2-794631-2 5-794631-2 2-794631-4 5-794631-4 794632-2 3-794632-2 794632-4 3-794632-4 794632-6 3-794632-6 794632-8 3-794632-8 1-794632-0 4-794632-0 non-compliant rohs compliant part number part number 794622-8 3-794622-8 1-794622-0 4-794622-0 1-794622-2 4-794622-2 1-794622-4 4-794622-4 1-794622-6 4-794622-6 1-794622-8 4-794622-8 2-794622-0 5-794622-0 2-794622-2 5-794622-2 2-794622-4 5-794622-4 794623-2 3-794623-2 794623-4 3-794623-4 794623-6 3-794623-6 794623-8 3-794623-8 1-794623-0 4-794623-0 1-794623-2 4-794623-2 1-794623-4 4-794623-4 1-794623-6 4-794623-6 1-794623-8 4-794623-8 2-794623-0 5-794623-0 2-794623-2 5-794623-2 2-794623-4 5-794623-4 794624-2 3-794624-2 794624-4 3-794624-4 794624-6 3-794624-6 794624-8 3-794624-8 1-794624-0 4-794624-0 1-794624-2 4-794624-2 1-794624-4 4-794624-4 1-794624-6 4-794624-6 1-794624-8 4-794624-8 2-794624-0 5-794624-0 2-794624-2 5-794624-2 2-794624-4 5-794624-4 794625-2 3-794625-2 794625-4 3-794625-4 794625-6 3-794625-6 794625-8 3-794625-8 1-794625-0 4-794625-0 1-794625-2 4-794625-2 1-794625-4 4-794625-4 1-794625-6 4-794625-6 1-794625-8 4-794625-8 2-794625-0 5-794625-0 2-794625-2 5-794625-2 2-794625-4 5-794625-4 794626-2 3-794626-2 794626-4 3-794626-4 794626-6 3-794626-6 794626-8 3-794626-8 1-794626-0 4-794626-0 1-794626-2 4-794626-2 1-794626-4 4-794626-4 1-794626-6 4-794626-6 1-794626-8 4-794626-8 2-794626-0 5-794626-0 2-794626-2 5-794626-2 2-794626-4 5-794626-4 794627-2 3-794627-2 794627-4 3-794627-4 794627-6 3-794627-6 794627-8 3-794627-8 non-compliant rohs compliant part number part number 1-794632-2 4-794632-2 1-794632-4 4-794632-4 1-794632-6 4-794632-6 1-794632-8 4-794632-8 2-794632-0 5-794632-0 2-794632-2 5-794632-2 2-794632-4 5-794632-4 794633-2 3-794633-2 794633-4 3-794633-4 794633-6 3-794633-6 794633-8 3-794633-8 1-794633-0 4-794633-0 1-794633-2 4-794633-2 1-794633-4 4-794633-4 1-794633-6 4-794633-6 1-794633-8 4-794633-8 2-794633-0 5-794633-0 2-794633-2 5-794633-2 2-794633-4 5-794633-4 794634-2 3-794634-2 794634-4 3-794634-4 794634-6 3-794634-6 794634-8 3-794634-8 1-794634-0 4-794634-0 1-794634-2 4-794634-2 1-794634-4 4-794634-4 1-794634-6 4-794634-6 1-794634-8 4-794634-8 2-794634-0 5-794634-0 2-794634-2 5-794634-2 2-794634-4 5-794634-4 794635-2 3-794635-2 794635-4 3-794635-4 794635-6 3-794635-6 794635-8 3-794635-8 1-794635-0 4-794635-0 1-794635-2 4-794635-2 1-794635-4 4-794635-4 1-794635-6 4-794635-6 1-794635-8 4-794635-8 2-794635-0 5-794635-0 2-794635-2 5-794635-2 2-794635-4 5-794635-4 794636-2 3-794636-2 794636-4 3-794636-4 794636-6 3-794636-6 794636-8 3-794636-8 1-794636-0 4-794636-0 1-794636-2 4-794636-2 1-794636-4 4-794636-4 1-794636-6 4-794636-6 1-794636-8 4-794636-8 2-794636-0 5-794636-0 2-794636-2 5-794636-2 2-794636-4 5-794636-4 794637-2 3-794637-2 794637-4 3-794637-4 794637-6 3-794637-6 794637-8 3-794637-8 1-794637-0 4-794637-0 1-794637-2 4-794637-2 non-compliant rohs compliant part number part number 1-794637-4 4-794637-4 1-794637-6 4-794637-6 1-794637-8 4-794637-8 2-794637-0 5-794637-0 2-794637-2 5-794637-2 2-794637-4 5-794637-4 794638-2 3-794638-2 794638-4 3-794638-4 794638-6 3-794638-6 794638-8 3-794638-8 1-794638-0 4-794638-0 1-794638-2 4-794638-2 1-794638-4 4-794638-4 1-794638-6 4-794638-6 1-794638-8 4-794638-8 2-794638-0 5-794638-0 2-794638-2 5-794638-2 2-794638-4 5-794638-4 794662-2 1586489-2 794662-4 1586489-4 794662-6 1586489-6 794662-8 1586489-8 1-794662-0 1-1586489-0 1-794662-2 1-1586489-2 1-794662-4 1-1586489-4 1-794662-6 1-1586489-6 1-794662-8 1-1586489-8 2-794662-0 2-1586489-0 2-794662-2 2-1586489-2 2-794662-4 2-1586489-4 794663-2 1586490-2 794663-4 1586490-4 794663-6 1586490-6 794663-8 1586490-8 1-794663-0 1-1586490-0 1-794663-2 1-1586490-2 1-794663-4 1-1586490-4 1-794663-6 1-1586490-6 1-794663-8 1-1586490-8 2-794663-0 2-1586490-0 2-794663-2 2-1586490-2 2-794663-4 2-1586490-4 794664-2 1586491-2 794664-4 1586491-4 794664-6 1586491-6 794664-8 1586491-8 1-794664-0 1-1586491-0 1-794664-2 1-1586491-2 1-794664-4 1-1586491-4 1-794664-6 1-1586491-6 1-794664-8 1-1586491-8 2-794664-0 2-1586491-0 2-794664-2 2-1586491-2 2-794664-4 2-1586491-4 794665-2 1586492-2 794665-4 1586492-4 794665-6 1586492-6 794665-8 1586492-8 1-794665-0 1-1586492-0 1-794665-2 1-1586492-2 1-794665-4 1-1586492-4 non-compliant rohs compliant part number part number amp soft shell pin and socket connectors non-compliant to rohs compliant part number cross reference
219 catalog 82181 dimensions are in inches and dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 4-08 millimeters unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 non-compliant to rohs compliant part number cross reference (continued) 1-794665-8 1-1586492-8 2-794665-0 2-1586492-0 2-794665-2 2-1586492-2 2-794665-4 2-1586492-4 794666-2 1586493-2 794666-4 1586493-4 794666-6 1586493-6 794666-8 1586493-8 1-794666-0 1-1586493-0 1-794666-2 1-1586493-2 1-794666-4 1-1586493-4 1-794666-6 1-1586493-6 1-794666-8 1-1586493-8 2-794666-0 2-1586493-0 2-794666-2 2-1586493-2 2-794666-4 2-1586493-4 794667-2 1586494-2 794667-4 1586494-4 794667-6 1586494-6 794667-8 1586494-8 1-794667-0 1-1586494-0 1-794667-2 1-1586494-2 1-794667-4 1-1586494-4 1-794667-6 1-1586494-6 1-794667-8 1-1586494-8 2-794667-0 2-1586494-0 2-794667-2 2-1586494-2 2-794667-4 2-1586494-4 794668-2 1586495-2 794668-4 1586495-4 794668-6 1586495-6 794668-8 1586495-8 1-794668-0 1-1586495-0 1-794668-2 1-1586495-2 1-794668-4 1-1586495-4 1-794668-6 1-1586495-6 1-794668-8 1-1586495-8 2-794668-0 2-1586495-0 2-794668-2 2-1586495-2 2-794668-4 2-1586495-4 794669-2 1586496-2 794669-4 1586496-4 794669-6 1586496-6 794669-8 1586496-8 1-794669-0 1-1586496-0 1-794669-2 1-1586496-2 1-794669-4 1-1586496-4 1-794669-6 1-1586496-6 1-794669-8 1-1586496-8 2-794669-0 2-1586496-0 2-794669-2 2-1586496-2 2-794669-4 2-1586496-4 794677-2 3-794677-2 794677-4 3-794677-4 794677-6 3-794677-6 794677-8 3-794677-8 1-794677-0 4-794677-0 1-794677-2 4-794677-2 1-794677-4 4-794677-4 1-794677-6 4-794677-6 1-794677-8 4-794677-8 non-compliant rohs compliant part number part number 2-794677-0 5-794677-0 2-794677-2 5-794677-2 2-794677-4 5-794677-4 794678-2 3-794678-2 794678-4 3-794678-4 794678-6 3-794678-6 794678-8 3-794678-8 1-794678-0 4-794678-0 1-794678-2 4-794678-2 1-794678-4 4-794678-4 1-794678-6 4-794678-6 1-794678-8 4-794678-8 2-794678-0 5-794678-0 2-794678-2 5-794678-2 2-794678-4 5-794678-4 794679-2 3-794679-2 794679-4 3-794679-4 794679-6 3-794679-6 794679-8 3-794679-8 1-794679-0 4-794679-0 1-794679-2 4-794679-2 1-794679-4 4-794679-4 1-794679-6 4-794679-6 1-794679-8 4-794679-8 2-794679-0 5-794679-0 2-794679-2 5-794679-2 2-794679-4 5-794679-4 794680-2 3-794680-2 794680-4 3-794680-4 794680-6 3-794680-6 794680-8 3-794680-8 1-794680-0 4-794680-0 1-794680-2 4-794680-2 1-794680-4 4-794680-4 1-794680-6 4-794680-6 1-794680-8 4-794680-8 2-794680-0 5-794680-0 2-794680-2 5-794680-2 2-794680-4 5-794680-4 794681-2 3-794681-2 794681-4 3-794681-4 794681-6 3-794681-6 794681-8 3-794681-8 1-794681-0 4-794681-0 1-794681-2 4-794681-2 1-794681-4 4-794681-4 1-794681-6 4-794681-6 1-794681-8 4-794681-8 2-794681-0 5-794681-0 2-794681-2 5-794681-2 2-794681-4 5-794681-4 794682-2 3-794682-2 794682-4 3-794682-4 794682-6 3-794682-6 794682-8 3-794682-8 1-794682-0 4-794682-0 1-794682-2 4-794682-2 1-794682-4 4-794682-4 1-794682-6 4-794682-6 1-794682-8 4-794682-8 2-794682-0 5-794682-0 non-compliant rohs compliant part number part number 2-794682-2 5-794682-2 2-794682-4 5-794682-4 794704-1 1586542-1 1445050-2 2-1445050-2 1445050-3 2-1445050-3 1445050-4 2-1445050-4 1445050-5 2-1445050-5 1445050-6 2-1445050-6 1445050-7 2-1445050-7 1445050-8 2-1445050-8 1445050-9 2-1445050-9 1-1445050-0 3-1445050-0 1-1445050-1 3-1445050-1 1-1445050-2 3-1445050-2 1445051-2 2-1445051-2 1445051-3 2-1445051-3 1445051-4 2-1445051-4 1445051-5 2-1445051-5 1445051-6 2-1445051-6 1445051-7 2-1445051-7 1445051-8 2-1445051-8 1445051-9 2-1445051-9 1-1445051-0 3-1445051-0 1-1445051-1 3-1445051-1 1-1445051-2 3-1445051-2 1445052-2 2-1445052-2 1445052-3 2-1445052-3 1445052-4 2-1445052-4 1445052-5 2-1445052-5 1445052-6 2-1445052-6 1445052-7 2-1445052-7 1445052-8 2-1445052-8 1445052-9 2-1445052-9 1-1445052-0 3-1445052-0 1-1445052-1 3-1445052-1 1-1445052-2 3-1445052-2 1445053-2 2-1445053-2 1445053-3 2-1445053-3 1445053-4 2-1445053-4 1445053-5 2-1445053-5 1445053-6 2-1445053-6 1445053-7 2-1445053-7 1445053-8 2-1445053-8 1445053-9 2-1445053-9 1-1445053-0 3-1445053-0 1-1445053-1 3-1445053-1 1-1445053-2 3-1445053-2 1445054-2 2-1445054-2 1445054-3 2-1445054-3 1445054-4 2-1445054-4 1445054-5 2-1445054-5 1445054-6 2-1445054-6 1445054-7 2-1445054-7 1445054-8 2-1445054-8 1445054-9 2-1445054-9 1-1445054-0 3-1445054-0 1-1445054-1 3-1445054-1 1-1445054-2 3-1445054-2 1445055-2 2-1445055-2 1445055-3 2-1445055-3 1445055-4 2-1445055-4 non-compliant rohs compliant part number part number 1445055-5 2-1445055-5 1445055-6 2-1445055-6 1445055-7 2-1445055-7 1445055-8 2-1445055-8 1445055-9 2-1445055-9 1-1445055-0 3-1445055-0 1-1445055-1 3-1445055-1 1-1445055-2 3-1445055-2 1445056-2 2-1445056-2 1445056-3 2-1445056-3 1445056-4 2-1445056-4 1445056-5 2-1445056-5 1445056-6 2-1445056-6 1445056-7 2-1445056-7 1445056-8 2-1445056-8 1445056-9 2-1445056-9 1-1445056-0 3-1445056-0 1-1445056-1 3-1445056-1 1-1445056-2 3-1445056-2 1445057-2 2-1445057-2 1445057-3 2-1445057-3 1445057-4 2-1445057-4 1445057-5 2-1445057-5 1445057-6 2-1445057-6 1445057-7 2-1445057-7 1445057-8 2-1445057-8 1445057-9 2-1445057-9 1-1445057-0 3-1445057-0 1-1445057-1 3-1445057-1 1-1445057-2 3-1445057-2 1445058-2 2-1445058-2 1445058-3 2-1445058-3 1445058-4 2-1445058-4 1445058-5 2-1445058-5 1445058-6 2-1445058-6 1445058-7 2-1445058-7 1445058-8 2-1445058-8 1445058-9 2-1445058-9 1-1445058-0 3-1445058-0 1-1445058-1 3-1445058-1 1-1445058-2 3-1445058-2 1445084-2 2-1445084-2 1445084-3 2-1445084-3 1445084-4 2-1445084-4 1445084-5 2-1445084-5 1445084-6 2-1445084-6 1445084-7 2-1445084-7 1445084-8 2-1445084-8 1445084-9 2-1445084-9 1-1445084-0 3-1445084-0 1-1445084-1 3-1445084-1 1-1445084-2 3-1445084-2 1445085-2 2-1445085-2 1445085-3 2-1445085-3 1445085-4 2-1445085-4 1445085-5 2-1445085-5 1445085-6 2-1445085-6 1445085-7 2-1445085-7 1445085-8 2-1445085-8 1445085-9 2-1445085-9 1-1445085-0 3-1445085-0 non-compliant rohs compliant part number part number amp soft shell pin and socket connectors non-compliant to rohs compliant part number cross reference
220 catalog 82181 dimensions are in inches and dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 4-08 millimeters unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 non-compliant to rohs compliant part number cross reference (continued) 1-1445089-2 3-1445089-2 1445090-2 2-1445090-2 1445090-3 2-1445090-3 1445090-4 2-1445090-4 1445090-5 2-1445090-5 1445090-6 2-1445090-6 1445090-7 2-1445090-7 1445090-8 2-1445090-8 1445090-9 2-1445090-9 1-1445090-0 3-1445090-0 1-1445090-1 3-1445090-1 1-1445090-2 3-1445090-2 1445091-2 2-1445091-2 1445091-3 2-1445091-3 1445091-4 2-1445091-4 1445091-5 2-1445091-5 1445091-6 2-1445091-6 1445091-7 2-1445091-7 1445091-8 2-1445091-8 1445091-9 2-1445091-9 1-1445091-0 3-1445091-0 1-1445091-1 3-1445091-1 1-1445091-2 3-1445091-2 1445092-2 2-1445092-2 1445092-3 2-1445092-3 1445092-4 2-1445092-4 1445092-5 2-1445092-5 1445092-6 2-1445092-6 1445092-7 2-1445092-7 1445092-8 2-1445092-8 1445092-9 2-1445092-9 1-1445092-0 3-1445092-0 1-1445092-1 3-1445092-1 1-1445092-2 3-1445092-2 1445093-2 2-1445093-2 1445093-3 2-1445093-3 1445093-4 2-1445093-4 1445093-5 2-1445093-5 1445093-6 2-1445093-6 1445093-7 2-1445093-7 1445093-8 2-1445093-8 1445093-9 2-1445093-9 1-1445093-0 3-1445093-0 1-1445093-1 3-1445093-1 1-1445093-2 3-1445093-2 non-compliant rohs compliant part number part number 1-1445085-1 3-1445085-1 1-1445085-2 3-1445085-2 1445086-2 2-1445086-2 1445086-3 2-1445086-3 1445086-4 2-1445086-4 1445086-5 2-1445086-5 1445086-6 2-1445086-6 1445086-7 2-1445086-7 1445086-8 2-1445086-8 1445086-9 2-1445086-9 1-1445086-0 3-1445086-0 1-1445086-1 3-1445086-1 1-1445086-2 3-1445086-2 1445087-2 2-1445087-2 1445087-3 2-1445087-3 1445087-4 2-1445087-4 1445087-5 2-1445087-5 1445087-6 2-1445087-6 1445087-7 2-1445087-7 1445087-8 2-1445087-8 1445087-9 2-1445087-9 1-1445087-0 3-1445087-0 1-1445087-1 3-1445087-1 1-1445087-2 3-1445087-2 1445088-2 2-1445088-2 1445088-3 2-1445088-3 1445088-4 2-1445088-4 1445088-5 2-1445088-5 1445088-6 2-1445088-6 1445088-7 2-1445088-7 1445088-8 2-1445088-8 1445088-9 2-1445088-9 1-1445088-0 3-1445088-0 1-1445088-1 3-1445088-1 1-1445088-2 3-1445088-2 1445089-2 2-1445089-2 1445089-3 2-1445089-3 1445089-4 2-1445089-4 1445089-5 2-1445089-5 1445089-6 2-1445089-6 1445089-7 2-1445089-7 1445089-8 2-1445089-8 1445089-9 2-1445089-9 1-1445089-0 3-1445089-0 1-1445089-1 3-1445089-1 non-compliant rohs compliant part number part number 1445094-2 2-1445094-2 1445094-3 2-1445094-3 1445094-4 2-1445094-4 1445094-5 2-1445094-5 1445094-6 2-1445094-6 1445094-7 2-1445094-7 1445094-8 2-1445094-8 1445094-9 2-1445094-9 1-1445094-0 3-1445094-0 1-1445094-1 3-1445094-1 1-1445094-2 3-1445094-2 1445095-2 2-1445095-2 1445095-3 2-1445095-3 1445095-4 2-1445095-4 1445095-5 2-1445095-5 1445095-6 2-1445095-6 1445095-7 2-1445095-7 1445095-8 2-1445095-8 1445095-9 2-1445095-9 1-1445095-0 3-1445095-0 1-1445095-1 3-1445095-1 1-1445095-2 3-1445095-2 1445096-2 2-1445096-2 1445096-3 2-1445096-3 1445096-4 2-1445096-4 1445096-5 2-1445096-5 1445096-6 2-1445096-6 1445096-7 2-1445096-7 1445096-8 2-1445096-8 1445096-9 2-1445096-9 1-1445096-0 3-1445096-0 1-1445096-1 3-1445096-1 1-1445096-2 3-1445096-2 1445097-2 2-1445097-2 1445097-3 2-1445097-3 1445097-4 2-1445097-4 1445097-5 2-1445097-5 1445097-6 2-1445097-6 1445097-7 2-1445097-7 1445097-8 2-1445097-8 1445097-9 2-1445097-9 1-1445097-0 3-1445097-0 1-1445097-1 3-1445097-1 1-1445097-2 3-1445097-2 1445098-2 2-1445098-2 non-compliant rohs compliant part number part number 1445098-3 2-1445098-3 1445098-4 2-1445098-4 1445098-5 2-1445098-5 1445098-6 2-1445098-6 1445098-7 2-1445098-7 1445098-8 2-1445098-8 1445098-9 2-1445098-9 1-1445098-0 3-1445098-0 1-1445098-1 3-1445098-1 1-1445098-2 3-1445098-2 1445099-2 2-1445099-2 1445099-3 2-1445099-3 1445099-4 2-1445099-4 1445099-5 2-1445099-5 1445099-6 2-1445099-6 1445099-7 2-1445099-7 1445099-8 2-1445099-8 1445099-9 2-1445099-9 1-1445099-0 3-1445099-0 1-1445099-1 3-1445099-1 1-1445099-2 3-1445099-2 1445100-2 2-1445100-2 1445100-3 2-1445100-3 1445100-4 2-1445100-4 1445100-5 2-1445100-5 1445100-6 2-1445100-6 1445100-7 2-1445100-7 1445100-8 2-1445100-8 1445100-9 2-1445100-9 1-1445100-0 3-1445100-0 1-1445100-1 3-1445100-1 1-1445100-2 3-1445100-2 1445101-2 2-1445101-2 1445101-3 2-1445101-3 1445101-4 2-1445101-4 1445101-5 2-1445101-5 1445101-6 2-1445101-6 1445101-7 2-1445101-7 1445101-8 2-1445101-8 1445101-9 2-1445101-9 1-1445101-0 3-1445101-0 1-1445101-1 3-1445101-1 1-1445101-2 3-1445101-2 non-compliant rohs compliant part number part number amp soft shell pin and socket connectors non-compliant to rohs compliant part number cross reference
60617 155 60618 155 60619 155 60620 155 60842 155 60843 155 61085 203, 213 61086 203, 213 61116 155, 214 61117 155, 214 61118 155, 214 61173 155 61174 155 61233 203, 213 61234 203, 213 61250 213 61251 213 61252 213 61253 213 61314 155, 212 61320 156 61518 156 61527 156, 212 61626 166, 212 61627 166, 212 106527 126 106528 126, 212 106529 126, 212 171636 213 171637 213 171638 86 171639 86 172156 85, 87 172157 85, 87 172158 85, 87 172159 85, 87 172160 85, 87 172161 85, 88 172162 85, 88 172163 85, 88 172164 85, 87, 92 172165 85, 87, 90, 92, 103, 105 172166 85, 87, 90, 92, 103, 105 172167 85, 87, 90-92, 103-105 172168 85, 87, 90-92, 103-105 172169 85, 88, 90-92, 103-105 172170 85, 88, 90-92, 103-105 172171 85, 88, 90-92, 103-105 172233 85, 87 172234 85, 87 172327 85, 87 172328 85, 87 172329 85, 87 172330 85, 87 172331 85, 87 172332 85, 88 172333 85, 88 part no. page 172334 85, 88 172335 85, 87 172336 85, 87 172337 85, 87 172338 85, 87 172339 85, 87 172340 85, 88 172341 85, 88 172342 85, 88 172343 85, 87 172344 85, 87 172807 85, 89 172808 85, 89 172809 85, 89 172971 86 173924 184, 199 173925 184, 199 173926 184, 199 173956 85 173957 85, 89 173958 85 174552 154, 164 174670 86 177898 60, 62, 71 177899 60, 62, 71 177900 60, 63, 71 177901 60, 63, 71 177902 60, 63, 71 177903 60, 64, 71 177904 60, 64, 71 177905 60, 64, 71 177906 60, 67, 71 177907 60, 67, 71 177908 60, 68, 71 177909 60, 68, 71 177911 60, 69, 71 177912 60, 69, 71 177913 60, 70-71 177914 61, 211 177915 61, 211 177916 61, 211 177917 61, 211 177918 60, 71 177919 60, 71 177920 60, 71 177921 60, 71 179463 60, 65, 71 179464 60, 65, 71 179465 60, 66, 71 179466 60, 66, 71 179467 60, 66, 71 179592 61 179593 61 179594 61 179595 61 179838 61, 72 179839 61, 72 179840 61, 73 179841 61, 73 179843 61, 74 179844 61, 74 179846 61, 79 part no. page 179847 61, 79 179848 61, 80 179849 61, 80 179861 61, 75, 77 179862 61, 76-77 179938 61, 75, 77 179939 61, 75, 77 179944 61 179945 61 193796 201 193797 201 193839 201 193841 201 193842 201 194002 202 194009 202 194010 202 194012 202 194013 202 194014 202 194017 202 194018 202 200821 156 306088 14 316061 60, 78 316062 60, 78 316063 60, 78 316086 10, 12, 14 316087 10, 12, 14 316088 10, 12, 14 316089 10, 12, 14 316090 10, 12, 14 316091 10, 12, 14 316092 10, 12, 14 316094 10, 12, 14 316221 16 316222 16 316223 16 316224 16 316225 16 316226 16 316227 16 316299 72 316398 12 316399 12 316400 12 316401 12 316454 94 316455 94 316501 60, 62, 71 316502 60, 67, 71 316768 60, 62, 71 316769 60, 65, 71 316770 60, 71 350020 116 350021 116 350022 116 350073 156 350074 156 350078 155, 212 350079 155, 212 350200 166, 212 part no. page 350201 166, 212 350209 153, 161 350210 153, 161 350211 154, 161, 163 350212 153, 161 350213 153, 161 350214 153, 161 350218 172, 181, 213 350219 153, 161 350220 153, 161 350344 167 350345 167 350346 167 350347 167 350373 116 350374 116 350375 116 350376 116 350377 116 350378 116 350379 116 350380 116 350388 166 350389 166 350390 166 350391 166 350415 145, 212 350416 145, 212 350417 145, 212 350418 145, 212 350422 153, 161 350423 153, 161 350424 154, 161, 163 350425 153, 161 350426 153, 161 350427 153, 161 350428 171, 182 350429 171, 182 350430 171, 182 350431 171, 182 350432 171, 182 350433 171, 182 350434 171, 182 350444 155 350522 116 350523 116 350524 116 350536 172, 181, 213 350537 172, 213 350538 172, 213 350539 153, 158, 161 350540 153, 158, 161 350541 153, 158, 161 350542 153, 161 350543 154, 158, 161 350544 154, 158, 161 350547 172, 181 350550 172, 181 350551 172 350552 172 350557 155, 212 350558 155, 212 part no. page 221 catalog 82181 dimensions are in inches and dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 4-08 millimeters unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 note: this index lists all cataloged parts by base no. only. complete part nos. (with prefixes and/or suffixes) are shown on the page(s) indicated. part number index amp soft shell pin and socket connectors part number index
350779 171, 174, 182-185, 197-200 350780 171, 174 350781 171, 174 350782 171, 174 350783 171, 174 350784 171, 174 350786 171, 182, 191, 197 350787 171, 182, 191, 197 350789 171, 182, 191, 197 350790 171, 182, 191, 197 350792 171, 182, 191, 197 350793 171, 182, 191, 197 350809 171, 174, 182-183, 185, 197-198 350810 171, 174, 193 350811 173 350812 173 350824 171, 183, 191, 198 350825 171, 183, 191, 198 350826 171, 183, 191, 198 350827 171, 183, 191, 198 350828 171, 183, 191, 198 350829 171, 183, 191, 198 350830 171, 183, 191, 198 350831 171, 183, 191, 198 350832 171, 183, 191, 198 350833 171, 183, 191, 198 350834 171, 183, 191, 198 350835 171, 183, 191, 198 350836 171, 183, 191, 198 350837 171, 183, 191, 198 350838 112 350848 185 350849 185 350851 172, 212 350865 171, 174 350866 171, 174 350867 171, 174 350871 173 350873 172, 213 350874 172, 213 350877 173 350918 172 350919 172 350922 172, 213 350923 172, 213 350924 172, 212 350925 172, 212 350942 171, 183, 191, 200 350943 171, 183, 191, 200 350944 171, 183, 191, 200 350945 171, 183, 191, 200 350948 171, 185 350949 171, 185 350967 106, 205 350968 106, 205 350969 106, 205 350986 171, 183 350987 171, 183 350988 171, 183 350989 171, 183 part no. page 350561 172, 212 350570 172, 212 350576 153, 162 350577 153, 162 350578 153, 162 350579 153, 162 350582 171, 182 350583 171, 182 350584 171, 182 350585 171, 182 350586 171, 182 350587 171, 182 350588 171, 182 350589 175 350590 173 350591 112 350628 55, 211 350629 55, 211 350638 155 350639 155 350641 153, 162 350642 153, 162 350643 153, 162 350644 153, 162 350654 173, 181, 213 350669 173, 181 350687 173, 181, 213 350689 172 350690 172 350699 173, 213 350700 173, 213 350705 173, 181 350706 173 350707 173 350711 171, 182, 191, 197 350712 171, 182, 191, 197 350713 171, 182, 191, 197 350714 171, 182, 191, 197 350715 171, 174, 182-183, 197-198 350720 171, 174, 182-183, 197-198 350732 171, 182, 191, 197 350735 171, 174, 182-183, 197-198 350736 171, 174, 182-183, 197-198 350737 171, 182, 191, 197 350738 171, 182, 191, 197 350742 171, 182, 191, 197 350759 171, 183 350760 171, 183 350761 171, 183 350762 171, 183 350763 171, 183 350764 171, 183 350765 171, 183 350766 171, 174, 182-185, 197-200 350767 171, 174 350777 171, 174, 182-185, 197-200 350778 171, 174 part no. page 350990 171, 183 350991 171, 183 350992 171, 183 353891 60, 78 380935 116 380936 116 380937 116 380991 153, 161 380999 153, 161 480270 153, 158, 160-161 480271 153, 160 480273 153, 159 480274 153, 159 480275 153, 159 480276 153, 159, 162 480277 153, 159, 162 480278 153, 159, 162 480283 153, 158, 160-161 480284 153, 160 480285 153, 158, 160-161 480286 153, 160 480287 153, 160-161 480288 153, 160 480303 153, 157, 161, 163 480304 153, 159 480305 153, 157, 159 480318 153, 157, 161, 163 480319 153, 157 480323 153, 159 480324 153, 159, 162 480339 153, 158 480340 153, 158 480345 153, 158 480349 153, 157 480350 153, 157 480351 153, 157 480387 153, 157 480388 153, 157 480393 153, 157 480400 153, 157 480401 153, 157 480424 154, 157, 165, 163-164 480425 154, 159 480426 154, 157, 165, 162-163 480438 153, 160-161 480439 153, 160 480498 153, 157 480510 166 480512 166 480585 166 480586 166 480594 116 480634 116 480672 167 480673 167 480698 171, 174, 182-184 480699 171, 174 480700 171, 174, 182-184 480701 171, 174 480702 171, 174, 182-185 480703 171, 174 480704 171, 174, 182-183 part no. page 480705 171, 174 480706 171, 174, 182-183 480707 171, 174 480708 171, 174, 182-183 480709 171, 174 480710 171, 174, 182-183 480711 171, 174 480720 153,158,161 480721 153,158,161 480722 158, 161 480763 171, 174, 182-183, 185 480764 171, 174 480772 154 640309 172 640310 172 640347 172 640391 55, 211 640392 55, 211 640415 173 640466 171, 182 640467 171, 183 640497 105, 112 640498 105, 112 640499 105, 112 640500 105, 112 640501 105, 112 640502 105, 112 640503 105, 112 640504 105, 112 640505 105, 112 640506 105, 112 640507 105, 107 640508 105, 107 640509 105, 107 640510 105, 107 640511 105, 108 640512 105, 108 640513 105, 108 640514 105, 108 640515 105, 108 640516 105, 108 640517 105, 107, 112 640518 105, 107, 112 640519 105, 107, 112 640520 105, 107, 112 640521 105, 108, 112 640522 105, 108, 112 640523 105, 108, 112 640524 105, 108, 112 640525 105, 108, 112 640526 105, 108, 112 640545 112 640579 112 640580 112 640581 171, 174, 182-183, 185 640582 171, 174, 182, 185 640583 171, 185 640584 171, 185 640585 171, 174, 182, 185 640586 171, 174, 182, 185 640587 171, 185 640713 180, 196 part no. page 222 catalog 82181 dimensions are in inches and dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 4-08 millimeters unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 part number index (continued) amp soft shell pin and socket connectors part number index
640714 180, 196 640715 180, 196 640716 180, 196 640717 180, 196 640718 180, 196 640719 176 640720 176 640721 176 640722 176 640723 176 640724 176 640900 171, 182, 191, 197 640901 171, 183, 191, 198 641083 171 641294 106, 205 641300 112 641737 154, 163 641763 176 641775 176 641776 180, 196 641777 176 641778 176 641825 171, 182 641828 171, 182 641831 171, 182 641832 171, 182 641945 180, 196 641963 171, 182 641964 171, 182, 191, 197 641965 171, 182 641966 171, 182, 191, 197 641967 171, 182 641968 171, 182, 191, 197 641969 171, 182 641970 171, 182, 191, 197 641971 171, 182 641972 171, 182, 191, 197 641973 171, 182 641974 171, 182, 191, 197 641975 171, 182 641976 171, 182, 191, 197 643030 180, 196 643182 176 643226 171, 183, 191, 200 643228 171, 183, 191, 200 643230 171, 183, 191, 200 643232 171, 183, 191, 200 643234 171, 185 643235 185 643236 171, 185 643237 185 643313 176 643314 176 643405 171, 182 643406 171, 182, 191, 197 643407 171, 182 643408 171, 182 643410 171, 182 643411 171, 183 643412 171, 183, 191, 198 643413 171, 183 643414 171, 183, 191, 198 part no. page 643415 171, 183 643416 171, 183, 191, 198 643423 171, 183 643424 171, 183, 191, 198 643425 171, 183 643426 171, 183, 191, 198 643428 171, 183, 191, 198 643429 171, 183 643430 171, 183, 191, 198 643488 153, 163 643585 176 643749 182 770003 192, 213 770004 192, 213 770005 192, 213 770006 192, 213 770007 192, 213 770008 192, 213 770009 192, 213 770010 192, 213 770011 192, 213 770012 192, 213 770016 194-195, 185, 191, 193, 195, 197-198 770017 194-195, 191, 193, 195, 197-201 770018 194-195, 191, 193, 195, 197-201 770019 194-195, 191, 193, 195, 197-1201 770020 194-195, 191, 194-195, 197-198, 201 770021 194-195, 191, 194-195, 197-198, 201 770022 194-195, 191, 194-195, 197-198, 201 770023 194-195, 191, 194-195, 197-198, 201 770024 191, 193, 195, 201 770025 191, 193, 195, 201 770026 191, 193, 195, 201 770027 191, 194-195, 201 770028 191, 194-195, 201 770029 191, 194-195, 201 770030 191, 194-195, 201 770031 195 770032 195 770033 195 770034 195 770035 195 770036 195 770037 195 770038 195 770039 195 770040 195 770041 195 770042 195 770043 195 770044 195 770045 195 770046 195 770047 195 770048 195 770049 195 part no. page 770050 195 770051 195 770052 195 770053 195 770054 195 770055 195 770056 195 770057 195 770058 195 770063 146 770064 146 770065 146 770066 146 770068 146 770069 146 770070 146 770071 146 770073 146 770074 146 770075 146 770076 146 770077 146 770078 146 770083 146 770084 146 770085 146 770086 146 770087 146 770088 146 770089 146 770090 146 770091 146 770092 146 770093 146 770094 146 770095 146 770096 146 770097 146 770098 146 770099 146 770100 146 770101 146 770102 146 770103 146 770105 146 770106 146 770107 146 770108 146 770143 171, 182 770144 145 770145 145 770146 145 770147 145 770156 154, 163 770166 85, 90, 103, 107 770170 85, 90, 103, 107 770174 85, 90, 103, 107 770178 85, 90, 103, 107 770182 85, 90, 103, 107 770186 85, 90, 103, 107 770190 85, 90, 103, 107 770193 192, 213 part no. page 770194 192, 213 770210 173, 213 770232 163 770233 163 770234 173, 213 770246 192 770247 192 770248 192 770249 192 770250 192 770251 192 770252 192 770253 192 770254 192 770255 192 770262 171, 183 770264 146 770266 146 770269 148 770272 182 770274 56 770275 56 770276 148 770277 56 770278 56 770319 195 770320 195 770326 56 770329 148 770330 148 770331 56 770332 56 770333 56 770334 56 770335 56 770336 148 770337 148 770338 148 770339 148 770340 56 770341 56 770342 56 770343 56 770351 182 770353 56 770354 56 770355 56 770356 56 770360 148 770361 148 770364 145, 149 770365 145, 149 770372 148 770373 148 770377 180, 196 770383 145, 212 770385 145, 212 770416 192 770419 56 770421 171, 174 770424 149 770425 149 part no. page 223 catalog 82181 dimensions are in inches and dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 4-08 millimeters unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 part number index (continued) amp soft shell pin and socket connectors part number index
770973 85, 91, 105, 107 770974 85, 91, 105, 107 770983 53, 55 770985 85, 96 770986 85, 96 770987 85, 96 770988 85, 96 770994 185 770997 154, 162 794000 106, 205 794001 112 794012 153, 158 794015 146 794016 55 794017 55 794018 55 794019 55 794036 154, 163 794040 85, 90, 103, 107 794046 55, 211 794058 86 794059 86 794061 167 794065 85, 90, 103, 107 794066 85, 90, 103, 107 794067 85, 90, 103, 107 794068 85, 90, 103, 107 794069 85, 90, 103, 107 794070 85, 90, 103, 107 794071 85, 90, 103, 107 794072 85, 90, 103, 107 794073 85, 90, 103, 107 794074 85, 90, 103, 107 794075 85, 90, 103, 107 794076 85, 90, 103, 107 794077 85, 90, 103, 107 794078 85, 90, 103, 107 794079 85, 90, 103, 107 794096 171, 174 794103 55, 211 794105 85, 91, 105, 107 794106 85, 91, 105, 107 794107 85, 91, 105, 107 794108 85, 91, 105, 107 794116 214 794117 214 794118 214 794120 153, 163 794132 154, 157 794138 126, 212 794139 126, 212 794140 126, 212 794141 126 794142 126 794143 126 794184 90, 92, 101, 103, 105, 107 794185 101, 107 794186 90, 92, 101, 103, 105, 107 794187 101, 107 794188 90-92, 99, 101-102, 107 part no. page 770426 56 770427 56 770428 56 770429 56 770433 56 770441 56 770442 56 770443 56 770450 145, 149 770451 145, 149 770452 145, 149 770453 145, 149 770512 192 770526 154 770529 145, 212 770530 145, 212 770579 85, 88, 90-93, 103-106 770580 85, 88, 90-93, 103-106 770581 85, 88, 90, 92, 103, 105 770582 85, 88, 90, 92, 103, 105 770583 85, 88, 90, 92, 103, 105 770584 85, 88, 90, 92, 103, 105 770585 85, 88, 90, 92, 103, 105 770586 85, 88, 90, 92, 103, 105 770587 85, 88, 90, 92, 103, 105 770621 85, 90, 103, 107 770672 172 770673 172 770743 85, 90, 103, 107 770771 148 770782 146 770783 149 770784 149 770785 149 770810 149 770827 154, 157, 163 770829 154, 162-163 770834 85, 211 770835 85, 211 770842 146 770843 146 770846 154, 163 770858 85, 90, 103, 107 770859 85, 90, 103, 107 770872 85, 90, 103, 107 770872 97 770873 85, 90, 103, 107 770874 85, 90, 103, 107 770875 85, 90, 103, 107 770876 85, 90, 103, 107 770892 146 770901 86, 96, 211 770902 86, 96, 211 770903 86, 96, 211 770904 86, 96, 211 770966 85, 91, 105, 107 770967 85, 91, 105, 107 770968 85, 91, 105, 107 770969 85, 91, 105, 107 770970 85, 91, 105, 107 770971 85, 91, 105, 107 770972 85, 91, 105, 107 part no. page 794189 101, 107 794190 90-92, 99, 101-102, 107 794191 101, 107 794192 90-91, 100-101, 105, 107 794193 101, 107 794194 90-91, 100-102, 107 794195 101, 107 794196 90-91, 100-105, 107 794197 101, 107 794198 90, 92, 100-101, 105, 107 794199 101, 107 794200 90-91, 100-102, 107 794201 101, 107 794202 90, 92, 100-101, 105, 107 794203 101, 107 794204 90-91, 100-102, 107 794205 101, 107 794206 90, 92, 100-101, 105, 107 794207 101, 107 794208 90, 92, 100-101, 105, 107 794209 101, 107 794210 90, 92, 100-101, 105, 107 794211 101, 107 794212 90, 92, 100-101, 105, 107 794213 101, 107 794214 90, 92, 100-101, 105, 107 794215 101, 107 794216 100, 211 794217 100, 211 794218 100, 211 794219 100, 211 794220 100, 211 794221 100, 211 794222 100, 211 794223 100, 211 794224 100 794225 100 794226 100 794227 100 794228 100 794229 100 794230 100 794231 100 794236 154, 161 794237 101, 107 794238 101, 107 794239 101, 107 794240 101, 107 794241 101, 107 794242 101, 107 794243 101, 107 794244 101, 107 794245 101, 107 794246 101, 107 794247 101, 107 794248 101, 107 794249 101, 107 part no. page 794250 101, 107 794251 101, 107 794252 101, 107 794253 101, 107 794254 101, 107 794255 101, 107 794256 101, 107 794257 101, 107 794258 101, 107 794259 101, 107 794260 101, 107 794261 101, 107 794262 101, 107 794263 101, 107 794264 101, 107 794265 101, 107 794266 101, 107 794267 101, 107 794268 101, 107 794269 179 794270 179 794271 179 794272 179 794273 179 794274 179 794275 179 794276 179 794277 179 794278 179 794279 179 794280 179 794281 179 794282 179 794285 162 794287 154, 162 794302 128 794303 128 794304 128 794305 129 794306 129 794307 130 794308 130 794309 131 794310 131 794311 132 794312 132 794313 133 794325 85, 90, 104, 107 794326 85, 90, 104, 107 794327 85, 90, 104, 107 794328 85, 90, 104, 107 794329 85, 90, 104, 107 794330 85, 90, 104, 107 794349 128 794350 128 794351 128 794352 129 794353 129 794354 130 794355 130 794356 131 794357 131 part no. page 224 catalog 82181 dimensions are in inches and dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 4-08 millimeters unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 part number index (continued) amp soft shell pin and socket connectors part number index
794358 132 794359 132 794360 133 794369 101 794370 94 794374 85, 92 794380 53, 55 794406 86 794407 86 794412 214 794413 214 794415 132 794418 126,212 794421 126 794423 94 794429 131 794432 85, 90, 104, 107 794448 133 794449 133 794453 130 794454 131 794455 132 794466 128 794467 128 794468 129 794469 129 794470 130 794471 132 794472 133 794484 128 794485 128 794486 129 794487 129 794488 130 794489 130 794490 131 794491 131 794492 132 794493 132 794494 133 794507 133 794508 133 794509 133 794510 133 794511 133 794512 133 794513 133 794514 133 794515 133 794516 133 794526 133 794527 133 794528 133 794529 133 794530 133 794531 133 794532 133 794533 133 794534 133 794535 171 794536 171 794537 171 part no. page 794538 171 794540 128 794542 127 794543 128 794545 171 794546 171 794550 127 794576 121, 206 794577 127 794578 121, 206 794579 127 794588 133 794589 133 794590 133 794594 127 794598 127 794606 19-22, 211 794606 20 794607 19-22, 211 794608 19, 22, 211 794609 19, 22, 211 794610 19-22 794610 20 794611 19-22 794611 20 794612 19, 22 794613 19, 22 794615 19, 28 794616 19, 27 794617 19, 21, 24, 34-37, 43-47 794618 21, 44 794619 21, 44 794620 21, 44 794621 21, 46 794622 21, 46 794623 21, 46 794624 21, 45 794625 21, 45 794626 21, 45 794627 21, 47 794628 21, 47 794629 21, 47 794630 21, 34 794631 21, 34 794632 21, 34 794633 21, 36 794634 21, 36 794635 21, 36 794636 21, 37 794637 21, 37 794638 21, 37 794657 126 794677 21, 43 794678 21, 43 794679 21, 43 794680 21, 35 794681 21, 35 794682 21, 35 794683 167 794699 167 794700 166 part no. page 794707 171 794714 177 794715 177 794716 177 794727 171 794758 96 794760 177 794761 177 794762 177 794772 96 794772 97 794781 85, 96 794781 97 794805 85, 96 794805 97 794814 171 794815 171 794821 85, 96 794821 97 794824 96 794824 97 794851 171 794863 171 794894 85, 96 794894 97 794895 85, 96 794896 85, 96 794899 171 794900 171 794901 171 794911 191 794912 191 794939 85, 96 794940 85, 96 794941 85, 96 794942 85, 96 794953 122 794954 122 794955 114, 206 794956 114, 206 794957 114, 206 794958 114, 206 794991 180 794992 180 794993 180 794994 180 794995 96 797607 20 917353 61, 81 917354 61, 76-77 917683 12-13, 205 917684 12-13, 205 917686 10, 12-13 917687 10, 12-13 917688 10, 12-13 917689 10, 12-13 917690 10, 12-13 917691 10, 12-13 917692 10, 12-13 917693 10, 12-13 917694 10, 12-13 917695 10, 12-13 part no. page 917696 10, 12-13 917697 10, 12-13 917698 10, 12 917699 10, 12 917700 10, 12 917701 10, 12 917702 10, 12 917703 10, 12 917704 10, 12 917705 10, 12 917706 10, 12 917707 10, 12 917708 10, 12 917709 10, 12 917722 10, 16 917723 10, 16 917724 10, 16 917725 10, 16 917726 10, 16 917727 10, 16 917728 10, 16 917729 10, 16 917730 10, 16 917731 10, 16 917732 10, 16 917733 10, 16 917745 61, 79 917746 79 917747 80 917764 12, 14, 205 917765 12, 14, 205 917780 10, 15 917781 10, 15 917782 10, 15 917783 10, 15 917784 10, 15 917785 10, 15 917786 10, 15 917787 10, 15 917788 10, 15 917789 10, 15 917790 10, 15 917791 10, 15 917845 61,73 917894 15 917895 15 917896 15 917897 15 917898 15 917899 15 917900 15 926302 171, 174 926307 171, 174 926308 171, 174 926309 171, 174 1375618 126-127 1376294 136 1376347 137, 212 1376348 137, 212 1376382 136, 138, 140 1376383 136, 138, 140 1376384 136, 138, 140 part no. page 225 catalog 82181 dimensions are in inches and dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 4-08 millimeters unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 part number index (continued) amp soft shell pin and socket connectors part number index
1445087 20, 33 1445088 20, 38 1445089 20, 39 1445090 20, 40 1445091 20, 41 1445092 20, 42 1445093 20, 30 1445094 20, 31 1445095 20, 32 1445096 20, 33 1445097 20, 38 1445098 20, 39 1445099 20, 40 1445100 20, 41 1445101 20, 42 1565079 50, 211 1565080 50, 211 1565081 51 1565082 51 1565083 52 1565084 52 1565085 51 1565086 51 1565087 52 1565088 52 1586000 122 1586017 122 1586018 122 1586019 122 1586022 121 1586023 121 1586024 121 1586025 121 1586026 121 1586027 121 1586037 123 part no. page 1376385 136, 138, 140 1376386 136, 139, 141 1376387 136, 139, 141 1376388 136-138, 140 1376389 136-138, 140 1376390 136-138, 140 1376391 136-138, 140 1376392 136, 139, 141 1376393 136, 139, 141 1376394 136-139 1376395 136-139 1376396 136-138 1376397 136-138 1376421 136, 138, 140 1376437 140 1376439 140 1376440 140 1376441 140 1376442 140 1376443 140 1376444 140 1445022 19-20, 23, 30-33, 38-42 1445048 19, 26 1445049 19, 25 1445050 20, 30 1445051 20, 31 1445052 20, 32 1445053 20, 33 1445054 20, 38 1445055 20, 39 1445056 20, 40 1445057 20, 41 1445058 20, 42 1445084 20, 30 1445085 20, 31 1445086 20, 32 part no. page 1586038 123 1586039 123 1586040 123 1586041 123 1586042 123 1586043 123 1586044 123 1586101 121 1586102 121 1586103 121 1586104 121 1586105 121 1586106 121 1586305 167 1586314 121 1586315 121 1586316 121 1586317 121 1586359 97 1586359 96 1586362 96 1586362 97 1586404 96 1586489 128-133 1586490 128-133 1586491 128-133 1586492 128-133 1586493 128-133 1586494 128-133 1586495 128-133 1586496 128-133 1586512 153, 161 1586514 153, 161 1586515 154, 161 1586518 153, 161 1586520 153, 161 part no. page 1586522 153, 161 1586524 153, 161 1586525 154, 161 1586526 153, 161 1586528 153, 161 1586529 153, 161 1586530 153, 161 1586532 153, 161 1586534 154, 161 1586536 154, 161 1586539 162 1586544 153, 161 1586546 153, 161 1586585 124 1586586 124 1586587 124 1586588 124 1586627 161 1604210 178 1604254 178 1604256 178 1604941 178 1612334 50, 211 1612335 50, 211 1903486 60, 78 1903487 60, 78 1903720 60 ,66 1939343 60 ,73, 78 1939344 60 2029030 20, 29 2029047 20, 29 2029056 97 2029058 97 2029102 20, 29 2029104 20, 29 part no. page 226 catalog 82181 dimensions are in inches and dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 4-08 millimeters unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 part number index (continued) amp soft shell pin and socket connectors part number index
58074 163, 206 58373 166, 210 58374 166, 210 58380 172, 192, 210 58382 192, 201, 206 58439 172, 192, 210 58514 210 58631 203, 210 58632 203, 210 65780 209-210 69710 166, 172, 192, 210 82276 210 90247 166 90546 210 90547 210 90548 210 90574 210 90575 210 90714 126,210 90717 86, 100,210 90758 210 90759 210 90760 210 90869 55, 210 90870 55, 210 90871 145,210 90872 145, 210 91002 55, 86, 145, 172, 181, 192, 203, 206 91085 163, 206 91112 163, 206 91387 120, 210 91388 120, 210 91500 172-173, 181, 192, 210 91501 22, 209-210 part no. page 91502 22, 209-210 91504 155, 210 91506 172-173, 192,210 91508 172-173, 192,210 91510 172-173, 192,210 91512 155-156, 210 91515 155, 210 91522 86, 96, 100, 210 91526 112, 210 91528 155 91529 86, 96, 100, 210 91534 112, 210 91536 86 91552 210 91567 61, 210 91569 61, 210 91594 100, 210 188688 126 189727 86, 206 231894 163, 206 231920 163, 206 234603 12, 210 234604 12, 210 234605 12 234912 61 234914 61 305183 155, 206 318831 55, 206 318837 145, 206 318845 166, 206 318851 172, 181, 192, 201, 206 354500 207 356114 201 356337 201 356500 208 part no. page 455822 112, 206 455830 112, 155, 206 457306 116 465644 155, 206 466320 155-156, 172-173, 212-213 466351 112, 211 466352 112, 211 466426 155, 212 466462 203, 213 466588 172, 213 466597 172-173, 213 466616 172, 212 466656 145, 212 466686 55, 211 466878 145, 212 466913 211 466917 212-213 466920 212-213 466922 212 466955 211 466959 212 466986 211 466989 213 466990 211 567066 86, 96, 100, 211 567067 86, 96, 211 567211 192, 213 567212 192, 213 567213 192, 213 567214 192, 213 567216 173, 213 567251 211 567252 192, 213 567273 145, 212 567306 166, 212 part no. page 567309 166, 212 567337 145, 212 567418 86, 100, 211 567902 211 567913 213 567914 213 567959 126-127, 212 567960 126-127, 212 587309 212 680307 126-127, 212 680308 126-127, 212 680350 126, 212 680582 86, 100, 211 680854 100, 211 680893 22, 211 680894 22, 211 687763 155, 172-173, 181, 212-213 687765 155, 212 687898 172-173, 213 687926 55, 211 687996 203, 206 691458 181 794381 22 843996 207 854040 22, 211 1385194 22, 211 1385377 120, 212 1385448 120, 212 1385817 120 1586343 22 1586344 172, 206 1586700 50, 210 1596277 part no. page 227 catalog 82181 dimensions are in inches and dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 4-08 millimeters unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 tooling part number index amp soft shell pin and socket connectors tooling part number index
228 catalog 82181 dimensions are in inches and dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 4-08 millimeters unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 engineering notes amp soft shell pin and socket connectors
229 catalog 82181 dimensions are in inches and dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 4-08 millimeters unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 engineering notes amp soft shell pin and socket connectors
230 catalog 82181 dimensions are in inches and dimensions are shown for usa: 1-800-522-6752 south america: 55-11-2103-6000 revised 4-08 millimeters unless otherwise reference purposes only. canada: 1-905-470-4425 hong kong: 852-2735-1628 specified. values in brackets specifications subject mexico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. c. america: 52-55-1106-0803 uk: 44-8706-080-208 engineering notes amp soft shell pin and socket connectors
82181C7.5mCmsCfpC4-08 0g3b tyco electronics corporation printed in the u.s.a. www.tycoelectronics.com 231 global contacts americas argentina C buenos aires phone: +54-11-4733-2200 fax: +54-11-4733-2211 brasil C s?o paulo phone: +55-11-3611-1311 fax: +55-11-3611-0397 canada C toronto phone: +905-475-6222 fax: +905-474-5520 product information center: (technical support) phone: +905-470-4425 fax: +905-474-5525 colombia C bogota phone: +57-1-231-9398 fax: +57-1-660-0206 mexico C mexico city phone: +52-55-1106-0800 +01-800-733-8926 fax: +52-55-1106-0901 united states C harrisburg, pa phone: +717-564-0100 fax: +717-986-7575 product information center: (technical support) phone: +800-522-6752 fax: +717-986-7575 for lati n/ south american countries not shown phone: +54-11-4733-2015 fax: +54-11-4733-2083 asia/ pacific australia C sydney phone: +61-2-9554-2600 fax: +61-2-9502-2556 product information center: (technical support) phone: +61-2-9840-8200 fax: +61-2-9634-6188 india C bangalore phone: +91-80-285-40800 fax: +91-80-285-40820 indonesia C jakarta phone: +65-6482-0311 fax: +65-6482-1012 japan C toyko phone: +81-44-844-8111 fax: +81-44-812-3207 product information center: (technical support) phone: +81-44-844-8013 fax: +81-44-812-3200 korea C seoul phone: +82-2-3415-4500 fax: +82-2-3486-3810 malaysia C kuala lumpur phone: +60-3-78053055 fax: +60-3-78053066 new zealand C auckland phone: +64-9-634-4580 fax: +64-9-634-4586 philippines C makati city phone: +632-848-0171 fax: +632-867-8661 peoples republic of china hong kong phone: +852-2735-1628 fax: +852-2735-0243 shanghai phone: +86-21-2407-1588 fax: +86-21-2407-1599 taiwan C taipei phone: +886-2-8768-2788 fax: +886-2-8768-2268 singapore C singapore phone: +65-6482-0311 fax: +65-6482-1012 thailand C bangkok phone: +66-2-955-0500 fax: +66-2-955-0505 vietnam and indochina C ho chi minh city phone: +84-8 930-5546 fax: +84-8 930-3443 europ e/ middle eas t/ africa austria C vienna phone: +43-1 90 5 60-0 fax: +43-1 90 5 60-1333 belgium C kessel-lo phone: +32-16-35-23-00 fax: +32-16-35-23-52 bulgaria C sofia phone: +359-2-971-2152 fax: +359-2-971-2153 czech republic C kurim phone: +420-5-41-162-111 fax: +420-5-41-162-223 denmark C glostrup phone: +45-43-480-452 fax: +45-43-441-414 egypt C cairo phone: +20-2-29 04 281 fax: +20-2-41 92 334 estonia C tartu phone: +372-5138-274 fax: +372-7400-779 finland C helsinki phone: +358-95-12-34-20 fax: +358-95-12-34-250 france C cergy-pontoise phone: +33-1-3420-8888 fax: +33-1-3420-8600 product information center: (technical support) phone: +33-1-3420-8943 fax: +33-1-3420-8623 germany C bensheim phone: +49-6251-133-0 fax: +49-6251-133-1600 product information center: (technical support) phone: +49-6251-133-1999 fax: +49-6251-133-1988 germany C langen phone: +49-6103-709-0 fax: +49-6103-709-1223 germany C speyer phone: +49-6232-30-0 fax: +49-6232-30-2243 germany - hts division C neunkirchen phone: +49-2247-305-0 fax: +49-2247-305-122 greece C athens phone: +30-210-9370-396/397 fax: +30-210-9370-655 hungary C budapest phone: +36-1-289-1000 fax: +36-1-289-1010 ireland C dublin phone: +353-1-820-3000 fax: +353-1-820-9790 israel C yokneam phone: +972-4-959-0508 fax: +972-4-959-0506 italy C collegno (torino) phone: +39-011-4012-111 fax: +39-011-4031116 lithuania C vilnius phone: +370-5-2131-402 fax: +370-5-2131-403 netherlands C s-hertogenbosch phone: +31-73-624-62-46 fax: +31-73-621-23-65 product information center: (technical support) phone: +31-73-6246-999 fax: +31-73-6246-998 norway C nesbru phone: +47-66-77-8886 fax: +47-66-77-8855 poland C warsaw phone: +48-22-45-76-700 fax: +48-22-45-76-720 romania C bucharest phone: +40-21-311-3479/3596 fax: +40-21-312-0574 russia C moscow phone: +7-495-926-5506/07/08/09 fax: +7-495-926-5505 russia C st. petersburg phone: +7-812-718-8192 fax: +7-812-718-8193 slovenia C ljubljana phone: +386-1561-3270 fax: +386-1561-3240 south africa C port elizabeth phone: +2741-503-4500 fax: +2741-581-0440 spain C barcelona phone: +34-93-291-0330 fax: +34-93-201-7879 product information center: (technical support): phone: +34-93-291-0330 fax: +34-93-200-3779 sweden C upplands v?sby phone: +46-8-50-72-50-00 fax: +46-8-50-72-50-01 switzerland C steinach phone: +41-71-447-0447 fax: +41-71-447-0444 turkey C istanbul phone: +90-212-281-8181/2/3 fax: +90-212-281-8184 ukraine C kiev phone: +380-044-206-2265 fax: +380-044-206-2264 united kingdom C swindon phone: +44-8706-080-208 fax: +44-1793-572-516 product information center: (technical support) freephone gb: 0800-267-666 phone: +44-8706-080-208 fax: +44-208-420-8081 for middle east/african countries not shown phone: +33-1-3420-8866 fax: +33-1-3420-8300 231
tyco electronics corporation harrisburg, pa tycoelectronics.com 82181C7.5mCmsCfpC4-08C2C0g3b amp soft shell pin and socket connectors catalog 82181 revised 4-08 soft shell pin and socket connectors

▲Up To Search▲

Price & Availability of 194018-1

	To Download 194018-1 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .